3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA310B3IDGKR
Texas Instruments · Current Sense Amplifiers · VSSOP-8
INA310B3IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Power supply input, specified from 2.7 V to 20 V. |
| 2 | OUT | output | Output voltage of the current-sense amplifier. |
| 3 | CMPIN | input | Comparator input, which is compared against the internal 0.6-V threshold to drive CMPOUT. |
| 4 | GND | power_in | Ground reference pin. |
| 5 | RESET | input | Comparator reset pin, active low: Low selects transparent mode and High selects latch mode. |
| 6 | CMPOUT | output | Comparator output, which latches high when RESET is High. |
| 7 | IN- | input | Shunt resistor negative sense input; connect to the load side of the sense resistor for high-side use and to the ground side for low-side use. |
| 8 | IN+ | input | Shunt resistor positive sense input; connect to the bus-voltage side of the sense resistor for high-side use and to the load side for low-side use. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | -4 | 110 | V | TA = -40°C to +125°C | 5 | |
| Common-mode rejection ratio (INA310Bx) | CMRR | 120 | 140 | dB | INA310Bx, VIN+ = -4 V to 110 V, TA = -40°C to +125°C | 5 | |
| Offset voltage, RTI (INA310B3) | VOS | -250 | 30 | 250 | µV | INA310B3 | 5 |
| Offset drift, RTI (INA310Bx) | dVOS/dT | -1 | 0.1 | 1 | µV/°C | TA = -40°C to +125°C, INA310Bx | 5 |
| Power-supply rejection ratio, RTI (INA310Bx) | PSRR | -10 | 1.5 | 10 | µV/V | 2.7 V ≤ VS ≤ 20 V, TA = -40°C to +125°C | 5 |
| Input bias current | IB | 10 | 20 | 30 | µA | IB+, IB-, VSENSE = 0 mV | 5 |
| Gain error (INA310Bx) | GERR | -0.5 | 0.07 | 0.5 | % | GND + 50 mV ≤ VOUT ≤ VS, 200 mV | 5 |
| Gain error drift (INA310Bx) | GERR drift | 2 | 20 | ppm/°C | TA = -40°C to +125°C, INA310Bx | 5 | |
| Maximum capacitive load | 500 | pF | No sustained oscillation, no isolation resistor | 5 | |||
| Alert threshold (25°C) | VTHRESHOLD | 585 | 600 | 615 | mV | TA = 25°C | 6 |
| Alert threshold (full temperature) | VTHRESHOLD | 580 | 620 | mV | TA = -40°C to +125°C | 6 | |
| Input bias current, CMPIN (25°C) | IBCMPIN | -20 | 1 | 20 | nA | TA = 25°C, VCMPIN = 0.4 V to 1.2 V | 6 |
| Input bias current, CMPIN (full temperature) | IBCMPIN | 250 | nA | TA = -40°C to +125°C, VCMPIN = 0.4 V to 1.2 V | 6 | ||
| High-level leakage current | ILKG | 1 | µA | VCMPout = VS | 6 | ||
| Low-level output voltage (25°C) | VOL | 300 | mV | IOL = 2.35 mA | 6 | ||
| Low-level output voltage (full temperature) | VOL | 350 | mV | TA = -40°C to +125°C, IOL = 2.35 mA | 6 | ||
| RESET high-level input voltage threshold | VIH | 1.2 | V | TA = -40°C to +125°C | 6 | ||
| RESET low-level input voltage threshold | VIL | 0.4 | V | TA = -40°C to +125°C | 6 | ||
| Supply voltage range | VS | 2.7 | 20 | V | TA = -40°C to +125°C | 6 | |
| Quiescent current | IQ | 1.6 | 2 | mA | 6 | ||
| Quiescent current (full temperature) | IQ | 2.25 | mA | TA = -40°C to +125°C | 6 | ||
| Common-mode input voltage (recommended) | VCM | -4 | 48 | 110 | V | Over operating free-air temperature range | 4 |
| Operating supply voltage | VS | 2.7 | 5 | 20 | V | Over operating free-air temperature range | 4 |
| Operating free-air temperature | TA | -40 | 125 | °C | Over operating free-air temperature range | 4 | |
| Supply voltage | VS | -0.3 | 22 | V | 4 | ||
| Differential analog input (VIN+), (VIN-) | -12 | 12 | V | Differential (VIN+), (VIN-) | 4 | ||
| Analog inputs with respect to GND | VIN+, VIN- | -20 | 120 | V | VIN+, VIN-, with respect to GND | 4 | |
| Input current into any pin | 5 | mA | 4 | ||||
| Operating temperature | TA | -55 | 150 | °C | Operating free-air temperature range | 4 | |
| Junction temperature | TJ | -65 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 172.2 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 63.5 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 93.8 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 9.8 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 92.2 | °C/W | DGK (VSSOP) 8 pins | 4 |
CAD (KiCad official)
- Symbol:
INA310B3IDGKR - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina310b3idgkr-etched.step/ina310b3idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina310b3idgkr.step/ina310b3idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
3e33543dd9085674, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).