3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS62826DMQT
Texas Instruments · DC-DC Converters · VSON-6(1.5x1.5)
TPS62826DMQT from Texas Instruments, in a VSON-6(1.5x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Device enable pin; it must be pulled high to enable the device, pulling it low disables the device, and it must not be left floating. |
| 2 | PG | output | Power-good open-drain output; the pull-up resistor can be connected to voltages up to 5.5 V, the sink current at PG is limited to 1 mA, and the pin may be left floating if unused. |
| 3 | FB | input | Feedback pin; for the fixed output voltage versions this pin must be connected to the output. |
| 4 | GND | power_in | Ground pin. |
| 5 | SW | power_out | Switch pin of the power stage; the datasheet's absolute maximum DC rating is -0.3 V to VIN + 0.3 V while the device is enabled. |
| 6 | VIN | power_in | Input voltage pin; the recommended input voltage range for TPS62826x is 2.4 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSON-6(1.5x1.5) |
| Category | Power Supply Chip |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS62826DMQT - Footprint:
Package_SON:WSON-6_1.5x1.5mm_P0.5mm - 3D model: VSON-6(1.5x1.5) (KiCad packages3D, STEP)
- 3D model files:
tps62826dmqt-etched.step/tps62826dmqt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62826dmqt.step/tps62826dmqt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
b208ce1c93601d87, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).