Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

M95080-DRMN3TP

STMicroelectronics · EEPROM · SO-8

M95080-DRMN3TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S input Chip Select, active low: driving it low selects the device and starts communication, and driving it high deselects the device and puts Q in high impedance.
2 Q tri_state Serial Data output, shifts data out on the falling edge of Serial Clock (C) MSB first during a Read and is high impedance in all other cases.
3 W input Write Protect, active low, used to write-protect the Status Register.
4 VSS power_in Ground, the reference for all signals including the VCC supply voltage.
5 D input Serial Data input, receives instructions, addresses and data to be written, latched on the rising edge of Serial Clock (C) MSB first.
6 C input Serial Clock input that synchronizes the serial interface, latching D on the rising edge, with Q changing after the falling edge.
7 HOLD input Hold, active low, pauses serial communication with the device without deselecting it or resetting the clocking sequence.
8 VCC power_in Supply voltage pin, 1.7 V to 5.5 V for voltage range R and 2.5 V to 5.5 V for voltage range W, decoupled with about 10 nF to 100 nF close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Memory
Pins 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin TLEAD Lead temperature during soldering See note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST ECOPACK® 28

CAD (KiCad official)

  • Symbol: M95080-DRMN3TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: m95080-drmn3tp-etched.step / m95080-drmn3tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m95080-drmn3tp.step / m95080-drmn3tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (42 pp, sha256 9c5384bbe3bf894c, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF