Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP1702T-2502E

Microchip Tech · Pre-ordered MCUs · SOT-23A-3

MCP1702T-2502E from Microchip Tech, in a SOT-23A-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Regulator ground; only the LDO bias current (2.0 µA typical) flows out of this pin, and the output regulation is referenced to it, so voltage drops between this pin and the load's negative side should be minimized.
2 VOUT power_out Regulated output voltage that supplies the load and the output capacitor's positive terminal, with the current flowing out of this pin equal to the DC load current.
3 VIN power_in Unregulated input supply that requires a low source impedance for stable operation, where 1 µF of capacitance ensures stability for most applications.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23A-3
Category Embedded Processors & Controllers
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.7 13.2 V Note 1 3
Input Quiescent Current Iq 2 5 µA IL = 0 mA 3
Maximum Output Current (VR ≥ 2.5V) IOUT_mA 250 mA For VR ≥ 2.5V 3
Output Voltage Regulation (tolerance ±3.0%) VOUT -3 0.4 3 % Note 2 3
Output Voltage Regulation (tolerance ±2.0%) VOUT -2 0.4 2 % 3
Line Regulation VOUT/(VOUTXVIN) -0.3 0.1 0.3 %/V (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 13.2V, (Note 1) 3
Load Regulation VOUT/VOUT -2.5 1 2.5 % IL = 1.0 mA to 250 mA for VR ≥ 2.5V 3
Dropout Voltage (2.5V ≤ VR < 2.8V) VDROPOUT 750 1100 mV IL = 250 mA, 2.5V ≤ VR < 2.8V 4
Operating Junction Temperature Range TJ -40 125 °C Steady State 5
Maximum Junction Temperature TJ 150 °C Transient 5
Storage Temperature Range TA -65 150 °C 5
Supply Voltage (VDD) VDD 14.5 V 3
Voltage on all inputs and outputs (lower limit) -0.3 V w.r.t. VSS (printed as VSS-0.3V) 3
Voltage on all inputs and outputs (upper limit) 0.3 V w.r.t. VIN (printed as VIN+0.3V) 3
ESD Protection (HBM) 4 kV HBM 3
ESD Protection (MM) 400 V MM 3
Thermal Resistance, Junction to Ambient (3L-SOT-23A) JA 336 °C/W EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board 5
Thermal Resistance, Junction to Case (3L-SOT-23A) JC 110 °C/W 5

CAD (KiCad official)

  • Symbol: MCP1702T-2502E
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23A-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1702t-2502e-etched.step / mcp1702t-2502e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1702t-2502e.step / mcp1702t-2502e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (26 pp, sha256 eebbb32821ad97ab, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF