3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHD3221ECA
Broadic · RS232 ICs · SSOP-16
HD3221ECA from Broadic, in a SSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | XEN | input | Receiver enable, active low; a high level forces the receiver outputs into high impedance. |
| 2 | C1+ | passive | Positive terminal of the boost charge-pump capacitor. |
| 3 | V+ | power_out | Charge-pump output generating +5.4V. |
| 4 | C1- | passive | Negative terminal of the boost charge-pump capacitor. |
| 5 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor. |
| 6 | C2- | passive | Negative terminal of the inverting charge-pump capacitor. |
| 7 | V- | power_out | Charge-pump output generating -5.4V. |
| 8 | R1IN | input | First RS-232 receiver input, rated ±20V in the absolute maximum ratings. |
| 9 | R1OUT | output | First TTL/CMOS receiver output, limited to -0.3V to (VCC + 0.3V) by the absolute maximum ratings. |
| 10 | XIDLE | output | TTL/CMOS output indicating the XPWRSAVE or shutdown state, limited to -0.3V to (VCC + 0.3V). |
| 11 | T1IN | input | First TTL/CMOS driver input. |
| 12 | XPWRSAVE | input | A high level forces the driver to operate; SHUTDOWN must be high for this function, and inputs are rated -0.3V to +6.0V. |
| 13 | T1OUT | output | First RS-232 driver output, rated ±15V and continuous short-circuit duration. |
| 14 | GND | power_in | Ground reference. |
| 15 | VCC | power_in | Supply voltage, +3V to +5.5V. |
| 16 | XSD | input | Shutdown control, active low; low disables the drivers and the voltage converter. Inputs are rated -0.3V to +6.0V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadic |
| Package | SSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Charge pump capacitor (C1P, C1N, C2P, C2N) | C1P,C1N,C2P,C2N | 0.1 | 0.1 | 1 | µF | 4 | |
| Supply voltage VCC (5.0V supply) | VCC | 4.5 | 5 | 5.5 | V | VCC = +5.0V Supply | 4 |
| Supply voltage VCC (3.3V supply) | VCC | 3 | 3.3 | 3.6 | V | VCC = +3.3V Supply | 4 |
| Operating temperature (Industrial Grade) | TA | -40 | 25 | 85 | °C | Industrial Grade, temperature -40°C to +85°C | 4 |
| Supply current, XPWRSAVE not enabled | 0.5 | 1 | mA | XPWRSAVE= VCC (HD3221E); XSD= VCC; TTL Inputs = VCC/GND; RS-232 Input = float; VCC = 3.3V | 4 | ||
| Supply current, XPWRSAVE enabled | 1 | 10 | µA | XPWRSAVE= GND (HD3221E); XSD= VCC; TTL Inputs = VCC/GND; RS-232 Input = float; VCC = 3.3V | 4 | ||
| Supply current, SHUTDOWN enabled | 1 | 10 | µA | XPWRSAVE= VCC/GND (HD3221E); XSD= GND; TTL Inputs = VCC/GND; RS-232 Inputs = float; VCC = 3.3V | 4 | ||
| Driver input threshold High (VCC = 5.0V) | 2.4 | V | VCC = +5.0V Supply | 4 | |||
| Driver input threshold High (VCC = 3.3V) | 2 | V | VCC = +3.3V Supply | 4 | |||
| Driver input leakage current | -1 | 1 | µA | VIN = VCC and GND, TIN, XEN, XPWRSAVE, XSD | 4 | ||
| Receiver output voltage Low | 0.4 | V | IOUT = 1.6mA | 4 | |||
| Receiver output leakage current | -10 | 10 | µA | Receiver Outputs Disabled, VOUT = VCC or GND, XSD= GND, XEN= VCC | 4 | ||
| Driver output voltage swing | -5 | 5 | V | RL = 3kΩ, All Outputs are loaded | 4 | ||
| Driver output resistance | 300 | Ω | VCC = VDD = VSS = GND, VOUT = ±2V | 4 | |||
| Receiver input resistance | 3 | 7 | kΩ | VIN = ±20V, TA = 25°C | 4 | ||
| Maximum data transmission rate (guaranteed) | 250 | kbps | RL = 3kΩ, CL = 1000pF, One Transmitter Switching, TA = 25°C, Refers to Figure 1 and 2 | 5 | |||
| Driver transition-region slew rate | 6 | 30 | V/µs | RL = 3~7kΩ, CL = 150pF to 1000pF, One Transmitter Switching, TA = 25°C, Measured from 3V to -3V or -3V to 3V | 5 | ||
| ESD HBM | -15 | 15 | kV | RS-232 Inputs and Outputs | 5 | ||
| ESD EN61000-4-2 Contact Discharge | -8 | 8 | kV | RS-232 Inputs and Outputs | 5 | ||
| ESD EN61000-4-2 Air Gap Discharge | -15 | 15 | kV | RS-232 Inputs and Outputs | 5 | ||
| Power supply voltage VCC | VCC | -0.3 | 6 | V | 3 | ||
| Power supply voltage VP | VP | -0.3 | 7 | V | 3 | ||
| Power supply voltage VN | VN | -7 | 0.3 | V | 3 | ||
| Supply difference VP+VN | VP+VN | 13 | V | 3 | |||
| DC VCC or GND current | ICC | -100 | 100 | mA | DC VCC or GND current | 3 | |
| Input voltage TxIN, XPWRSAVE, XSD, XEN | -0.3 | 6 | V | 3 | |||
| Input voltage RxIN | -20 | 20 | V | 3 | |||
| Output voltage TxOUT | -15 | 15 | V | 3 | |||
| Output voltage RxOUT, XIDLE | -0.3 | V | Upper limit printed as VCC +0.3V (expression, not numeric) | 3 | |||
| Operating temperature | -40 | 85 | °C | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Power dissipation, 16-pin SSOP | 584 | mW | 16-pin SSOP (derate 7.20mW/°C above +70°C) | 3 | |||
| Driver input hysteresis | 0.5 | V | 4 |
CAD (KiCad official)
- Symbol:
HD3221ECA - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16 (KiCad packages3D, STEP)
- 3D model files:
hd3221eca-etched.step/hd3221eca-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hd3221eca.step/hd3221eca.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadic datasheet (20 pp, sha256
c2537e7370756995, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).