component
AP22804AM8-13
Public Made by Adomby adom
Diodes Incorporated Power Distribution Switches, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAP22804AM8-13
Diodes Incorporated · Power Distribution Switches · MSOP-8
AP22804AM8-13 from Diodes Incorporated, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the circuitry. |
| 2 | IN | power_in | Voltage input pin; connect a 1μF low ESR capacitor to GND, close to the IC. |
| 3 | IN | power_in | Voltage input pin; connect a 1μF low ESR capacitor to GND, close to the IC. |
| 4 | EN | input | Enable input, active high (A) or active low (B) depending on the part suffix; this pin should NOT be left floating. |
| 5 | FLG | output | Over-current and over-temperature fault report; the open-drain flag is active low when triggered. |
| 6 | OUT | power_out | Voltage output pin; connect a 0.1μF bypass capacitor and a high-value capacitor to GND close to the IC (at least 10μF in USB application). |
| 7 | OUT | power_out | Voltage output pin; connect a 0.1μF bypass capacitor and a high-value capacitor to GND close to the IC (at least 10μF in USB application). |
| 8 | NC | unconnected | No internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | MSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | -0.3 | 6 | V | 3 | ||
| Output Voltage | VOUT | -0.3 | V | Printed maximum is (VIN + 0.3) | 3 | ||
| Enable Voltage | VEN | -0.3 | V | Printed maximum is (VIN + 0.3) | 3 | ||
| ESD Human Body Model | ESD HBM | 2000 | V | 3 | |||
| ESD Machine Model | ESD MM | 200 | V | 3 | |||
| Maximum Junction Temperature | TJ(max) | 150 | °C | 3 | |||
| Storage Temperature | TST | -65 | 150 | °C | 3 | ||
| Thermal Resistance, Junction to Ambient, MSOP-8 | RJA | 165 | °C/W | MSOP-8; measured at TA = +25°C per JEDEC 51-7 | 3 | ||
| Thermal Resistance, Junction to Case, MSOP-8 | RJC | 33 | °C/W | MSOP-8 | 3 | ||
| Input Voltage | VIN | 2.7 | 5.5 | V | 3 | ||
| Output Current (AP22804) | IOUT | 0 | 2.5 | A | AP22804 | 3 | |
| EN Input Logic Low Voltage | VIL | 0 | 0.5 | V | 3 | ||
| EN Input Logic High Voltage | VIH | 1.5 | V | Printed maximum is VIN | 3 | ||
| Operating Ambient Temperature | TA | -40 | 85 | C | 3 | ||
| Input UVLO | VUVLO | 1.6 | 2 | 2.4 | V | VIN rising | 4 |
| Input Shutdown Current | ISHDN | 0.1 | 1 | µA | Disabled, OUT = open | 4 | |
| Input Leakage Current | ILEAK | 0.1 | 1 | µA | Disabled, OUT grounded | 4 | |
| Reverse Leakage Current | IREV | 0.01 | 1 | µA | Disabled, VIN = 0V, VOUT = 5V, IREV at VIN | 4 | |
| Switch On-Resistance | RDS(ON) | 50 | 65 | mΩ | VIN = 5.0V, IOUT = 1A, MSOP-8 | 4 | |
| Over Load Current Limit (AP22804) | ILIMIT | 2.7 | 3 | 3.3 | A | AP22804, VIN = 5V, VOUT = 4.5V | 4 |
| EN Input Logic Low Voltage | VIL | 0.65 | V | VIN = 2.7V to 5.5V | 4 | ||
| EN Input Logic High Voltage | VIH | 1.5 | V | VIN = 2.7V to 5.5V | 4 | ||
| EN Input Leakage | ILEAK-EN | 0.01 | 1 | µA | VIN = 5V, VEN = 0V and 5.5V | 4 | |
| Output Leakage Current | ILEAK-O | 0.5 | 1 | µA | Disabled, VOUT = 0V | 4 | |
| Output Turn-On Rise Time | tR | 1 | 2.1 | 3.5 | ms | CL = 4.7µF, RLOAD = 10Ω @ VIN = 3.3V, Figure 1 | 4 |
| FLG Output FET On-Resistance | RFLG | 40 | 60 | Ω | IFLG = 10mA | 4 | |
| FLG Off Current | IFOH | 0.01 | 1 | µA | VFLG = 5V | 4 | |
| FLG Blanking Time | tBLANK | 2 | 6 | 13 | ms | Assertion or deassertion due to overcurrent and over-temperature condition | 4 |
| Discharge Resistance | RDIS | 90 | 130 | Ω | VIN = 5V, disabled, IOUT = 1mA | 4 | |
| Reverse-Voltage Comparator Trip Point | VRVP | 25 | 50 | 75 | mV | VOUT - VIN | 4 |
| Time from Reverse-Voltage Condition to MOSFET Turn Off | tTRIG | 2 | 6 | 13 | ms | VIN | 4 |
CAD (KiCad official)
- Symbol:
AP22804AM8-13 - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ap22804am8-13-etched.step/ap22804am8-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap22804am8-13.step/ap22804am8-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (19 pp, sha256
ecedef9e2bb35265, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).