Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

TMUX6208PWR

Texas Instruments · Analog Switches / Multiplexers · TSSOP-16

TMUX6208PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Logic control input (address bit 0) with internal 4 MΩ pull-down resistor. Selects which Sx source pin is connected to D per the truth table in Section 8.5.
2 EN input Active-high logic enable with internal 4 MΩ pull-down resistor. When low all switches are off; when high the A0/A1/A2 address selects the active Sx-to-D switch.
3 VSS power_in Negative power supply (most negative rail). Tie to GND for single-supply operation, or to a negative rail for dual/asymmetric supplies. Decouple with 0.1 µF to 10 µF to GND.
4 S1 bidirectional Source pin 1 of the 8:1 analog switch. Signal-path input or output; voltage bounded by VSS to VDD, current per IDC table (e.g. 300 mA at 25 °C, ±15 V dual supply, TSSOP).
5 S2 bidirectional Source pin 2 of the 8:1 analog switch. Signal-path input or output; voltage bounded by VSS to VDD.
6 S3 bidirectional Source pin 3 of the 8:1 analog switch. Signal-path input or output; voltage bounded by VSS to VDD.
7 S4 bidirectional Source pin 4 of the 8:1 analog switch. Signal-path input or output; voltage bounded by VSS to VDD.
8 D bidirectional Common drain (multiplexer common) pin. Connects to whichever Sx is selected by A0/A1/A2 when EN is high; can be an input or output. Voltage bounded by VSS to VDD.
9 S8 bidirectional Source pin 8 of the 8:1 analog switch. Signal-path input or output; voltage bounded by VSS to VDD.
10 S7 bidirectional Source pin 7 of the 8:1 analog switch. Signal-path input or output; voltage bounded by VSS to VDD.
11 S6 bidirectional Source pin 6 of the 8:1 analog switch. Signal-path input or output; voltage bounded by VSS to VDD.
12 S5 bidirectional Source pin 5 of the 8:1 analog switch. Signal-path input or output; voltage bounded by VSS to VDD.
13 VDD power_in Positive power supply (most positive rail). Recommended 4.5 V to 36 V (VDD − VSS ≤ 36 V). Decouple with 0.1 µF to 10 µF between VDD and GND.
14 GND power_in Ground (0 V) reference for the logic and supply-decoupling network.
15 A2 input Logic control input (address bit 2) with internal 4 MΩ pull-down resistor. Selects which Sx source pin is connected to D per the truth table in Section 8.5.
16 A1 input Logic control input (address bit 1) with internal 4 MΩ pull-down resistor. Selects which Sx source pin is connected to D per the truth table in Section 8.5.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Comm/UART
Pins 16

Ordering variants

Same part, different packaging or reel option.

  • TMUX6208PWR
  • TMUX6208PWRRUM
  • TMUX6208PWRRUMR

CAD (KiCad official)

  • Symbol: TMUX6208PWR
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 dbb3e771e4dd4423, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF