Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN75C3232DBR

Texas Instruments · RS232 ICs · SSOP-16-208mil

SN75C3232DBR from Texas Instruments, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive lead of the C1 charge-pump capacitor; Table 9-1 gives C1 = 0.1 µF for 3.3 V ±0.3 V and 0.047 µF for 5 V ±0.5 V.
2 V+ power_out Positive charge-pump output for the storage capacitor only; it is not intended as an external supply, and absolute maximum V+ is −0.3 V to 7 V with respect to network GND.
3 C1- passive Negative lead of the C1 charge-pump capacitor.
4 C2+ passive Positive lead of the C2 charge-pump capacitor; Table 9-1 gives C2 = 0.1 µF at 3.3 V and 0.33 µF at 5 V.
5 C2- passive Negative lead of the C2 charge-pump capacitor.
6 V- power_out Negative charge-pump output for the storage capacitor only; absolute maximum V− is −7 V to 0.3 V with respect to network GND.
7 DOUT2 output RS-232 line data output to the remote RS-232 system; driver outputs are protected against shorts to ground and rated ±13.2 V absolute maximum.
8 RIN2 input RS-232 line data input from the remote RS-232 system; receiver input range is −25 V to 25 V and each input includes an internal standard RS-232 load.
9 ROUT2 output Logic data output to the UART; an open RIN2 input produces a high level on this output.
10 DIN2 input Logic data input from the UART; high-level input is 2 V minimum at VCC = 3.3 V or 2.4 V minimum at VCC = 5 V, low-level input is 0.8 V maximum, and all DIN inputs must be held at valid logic levels.
11 DIN1 input Logic data input from the UART; high-level input is 2 V minimum at VCC = 3.3 V or 2.4 V minimum at VCC = 5 V, low-level input is 0.8 V maximum, and all DIN inputs must be held at valid logic levels.
12 ROUT1 output Logic data output to the UART; an open RIN1 input produces a high level on this output.
13 RIN1 input RS-232 line data input from the remote RS-232 system; receiver input range is −25 V to 25 V and each input includes an internal standard RS-232 load.
14 DOUT1 output RS-232 line data output to the remote RS-232 system; driver outputs are protected against shorts to ground and rated ±13.2 V absolute maximum.
15 GND power_in Ground reference for the device; all voltages are referenced to network GND.
16 VCC power_in Supply voltage input, connected to an external 3 V to 5.5 V power supply (recommended 3.3 V or 5 V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-16-208mil
Category Interface
Pins 16

CAD (KiCad official)

  • Symbol: SN75C3232DBR
  • Footprint: Package_SO:SSOP-16_5.3x6.2mm_P0.65mm
  • 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
  • 3D model files: sn75c3232dbr-etched.step / sn75c3232dbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn75c3232dbr.step / sn75c3232dbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 1148f8763bbf77a1, retrieved 2026-10-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF