component
XM5062S-ADJ
Public Made by Adomby adom
XySemi DC-DC Converters, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXM5062S-ADJ
XySemi · DC-DC Converters · SOT-23-5
XM5062S-ADJ from XySemi, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input: when higher than 1.5V the pin turns the IC on, and when lower than 0.3V it turns the IC off. |
| 2 | GND | power_in | Ground reference pin for the converter. |
| 3 | SW | output | Switch output that connects to the inductor. |
| 4 | VIN | power_in | Power supply input; the datasheet gives a 2.5V to 6.0V input range and an absolute maximum of -0.3V to 6.5V. |
| 5 | FB | input | Feedback input regulated to 0.6V; connect it to a resistor divider between the output and ground to set the output voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XySemi |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VIN | -0.3 | 6.5 | V | 2 | ||
| FB, EN Voltage | -0.3 | V | 2 | ||||
| SW Voltage | -0.3 | V | 2 | ||||
| Operating Ambient Temperature | -40 | 85 | °C | 2 | |||
| Maximum Junction Temperature | 125 | °C | 3 | ||||
| Storage Temperature | -55 | 150 | °C | 3 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 10 sec soldering | 3 | |||
| Input Voltage Range | VIN | 2.5 | 6 | V | 3 | ||
| UVLO Threshold | VUVLO | 2.35 | 2.45 | 2.5 | V | VHYSTERESIS =100mV | 3 |
| Operating Supply Current | ISUPPLY | 130 | 170 | µA | VFB =0.5V or VOUT =90%, ILoad =0 | 3 | |
| Standby Mode Supply Current | 20 | 35 | µA | VFB =0.62V or VOUT =103%, ILoad =0 | 3 | ||
| Shutdown Supply Current | 0.1 | 1 | µA | VEN =0V, VIN =4.2V | 3 | ||
| Regulated Feedback Voltage (Ta =25°C) | VFB | 0.588 | 0.6 | 0.612 | V | Ta =25°C | 3 |
| Regulated Feedback Voltage (0< Ta <85°C) | VFB | 0.5865 | 0.6 | 0.6135 | V | 0< Ta <85°C | 3 |
| Regulated Feedback Voltage (-40°C < Ta <85°C) | VFB | 0.585 | 0.6 | 0.615 | V | -40°C < Ta <85°C | 3 |
| Reference Voltage Line Regulation | 0.04 | 0.4 | % | VIN =2.7V to 5.5V | 3 | ||
| Regulated Output Voltage | VOUT | 1.746 | 1.8 | 1.854 | V | VOUT =1.8V; IOUT =100mA | 3 |
| Output Voltage Load Regulation | 0.5 | % | 3 | ||||
| Peak Inductor Current | IPEAK | 1.8 | A | VIN =3V, VFB =0.5V or VOUT =90%,Duty Cycle<35% | 3 | ||
| Oscillator Frequency | FOSC | 1.2 | 1.5 | 1.8 | MHz | VFB=0.6V or VOUT =100% | 3 |
| Oscillator Frequency (foldback) | FOSC | 220 | KHz | VFB=0 or VOUT =0 | 3 | ||
| Rds(ON) of P-channel FET | 0.2 | 0.3 | Ohm | ISW =100mA | 3 | ||
| Rds(ON) of N-channel FET | 0.15 | 0.2 | Ohm | ISW =-100mA | 3 | ||
| Enable Threshold | 0.3 | 1 | 1.5 | V | VIN = 2.5V to 5.5V | 3 | |
| Enable Leakage Current | -0.1 | 0.1 | µA | 3 | |||
| SW Leakage Current | -1 | 1 | uA | VEN = 0V, VSW = 0V or 5V, VIN = 5V | 3 |
CAD (KiCad official)
- Symbol:
XM5062S-ADJ - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
xm5062s-adj-etched.step/xm5062s-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xm5062s-adj.step/xm5062s-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XySemi datasheet (8 pp, sha256
7db9f7b339a99ce0, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).