3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIL4108
Vishay Intertech · Transistor, Photovoltaic Output Optoisolators · DIP-6
IL4108 from Vishay Intertech, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A | passive | Anode of the GaAs IRLED input; forward current IF is rated 60 mA max with VF 1.16 V typ at 10 mA. |
| 2 | C | passive | Cathode of the GaAs IRLED input; reverse voltage is limited to 6 V. |
| 3 | NC | unconnected | No internal connection. |
| 4 | MT1 | passive | Main terminal 1 of the zero-crossing phototriac output, connected to the zero crossing circuit; the output is rated 800 V VDRM and 300 mA RMS on-state current for the IL4108. |
| 5 | NC | unconnected | No internal connection. |
| 6 | MT2 | passive | Main terminal 2 of the zero-crossing phototriac output; the output is rated 800 V VDRM and 300 mA RMS on-state current for the IL4108. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reverse voltage | VR | 6 | V | 2 | |||
| Forward current | IF | 60 | mA | 2 | |||
| Surge current | IFSM | 2.5 | A | 2 | |||
| Power dissipation (input) | Pdiss | 100 | mW | 2 | |||
| Peak off-state voltage, IL4108 | VDRM | 800 | V | IL4108 | 2 | ||
| RMS on-state current | ITM | 300 | mA | 2 | |||
| Single cycle surge current | 3 | A | 2 | ||||
| Total power dissipation | Pdiss | 500 | mW | 2 | |||
| Storage temperature range | Tstg | -55 | 150 | °C | 2 | ||
| Ambient temperature | Tamb | -55 | 100 | °C | 2 | ||
| Soldering temperature | Tsld | 260 | °C | Max. ≤ 10 s dip soldering, ≥ 0.5 mm from case bottom | 2 | ||
| Forward voltage | VF | 1.16 | 1.35 | V | IF = 10 mA | 3 | |
| Reverse current | IR | 0.1 | 10 | μA | VR = 6 V | 3 | |
| Off-state current | IDRM | 10 | 100 | μA | VD = VDRM, Tamb = 100 °C, IF = 0 mA | 3 | |
| On-state voltage | VTM | 1.7 | 3 | V | IT = 300 mA | 3 | |
| Surge (non-repetitive), on-state current | ITSM | 3 | A | f = 50 Hz | 3 | ||
| Trigger current 1 | IFT1 | 2 | mA | VD = 5 V | 3 | ||
| Trigger current 2 | IFT2 | 6 | mA | VD = 220 VRMS, f = 50 Hz, Tj = 100 °C, tp IF > 10 ms | 3 | ||
| Trigger current temp. gradient | ΔIFT1/ΔTj | 7 | 14 | μA/°C | 3 | ||
| Off-state current in inhibit state | IDINH | 50 | 200 | μA | IF = IFT1, VD = VDRM | 3 | |
| Holding current | IH | 65 | 500 | μA | 3 | ||
| Latching current | IL | 500 | μA | VT = 2.2 V | 3 | ||
| Zero cross inhibit voltage | VIH | 15 | 25 | V | IF = rated IFT | 3 | |
| Critical rate of rise of off-state voltage | dV/dtcr | 10000 | V/μs | VD = 0.67 VDRM, Tj = 25 °C | 3 | ||
| Critical rate of rise of off-state voltage | dV/dtcr | 5000 | V/μs | VD = 0.67 VDRM, Tj = 80 °C | 3 | ||
| Critical rate of rise of coupled input/output voltage | dVIO/dt | 10000 | V/μs | IT = 0 A, VRM = VDM = VDRM | 3 | ||
| Thermal resistance, junction to ambient (input) | Rthja | 750 | °C/W | 3 | |||
| Thermal resistance, junction to ambient (output) | Rthja | 150 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
IL4108 - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 4.395 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
il4108-etched.step/il4108-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);il4108.step/il4108.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (9 pp, sha256
2f4e2752fb74dc35, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).