component
AT24C16C-SSHM-B
Public Made by Adomby adom
Microchip Tech EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAT24C16C-SSHM-B
Microchip Tech · EEPROM · SOIC-8
AT24C16C-SSHM-B from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect; the datasheet assigns no function to this pin. |
| 2 | NC | unconnected | No connect; the datasheet assigns no function to this pin. |
| 3 | NC | unconnected | No connect; the datasheet assigns no function to this pin. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Bidirectional open-drain serial data pin that may be wire-ORed with any number of other open-drain or open-collector devices. |
| 6 | SCL | input | Serial clock input: data is positive-edge clocked into the device and negative-edge clocked out of it. |
| 7 | WP | input | Write Protect: connection to GND allows normal read/write operations, while connection to VCC enables write protection of the array as shown in Table 4-1. |
| 8 | VCC | power_in | Power supply; the device operates from 1.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Temperature | -55 | 125 | C | 2 | |||
| Storage Temperature | -65 | 150 | C | 2 | |||
| Voltage on any pin with respect to ground | -1 | 7 | V | 2 | |||
| Maximum Operating Voltage | 6.25 | V | 2 | ||||
| DC Output Current | 5 | mA | 2 | ||||
| Input/Output capacitance (SDA) | CI/O | 8 | pF | VI/O = 0V | 4 | ||
| Input capacitance (A0, A1, A2, SCL) | CIN | 6 | pF | VIN = 0V | 4 | ||
| Supply Voltage | VCC1 | 1.7 | 5.5 | V | 4 | ||
| Supply Current (read) | ICC | 0.4 | 1 | mA | VCC = 5.0V Read at 100kHz | 4 | |
| Supply Current (write) | ICC | 2 | 3 | mA | VCC = 5.0V Write at 100kHz | 4 | |
| Standby Current | ISB1 | 1 | μA | VCC = 1.7V VIN = VCC or VSS | 4 | ||
| Standby Current | ISB2 | 6 | μA | VCC = 5.5V VIN = VCC or VSS | 4 | ||
| Input Leakage Current | ILI | 0.1 | 3 | μA | VIN = VCC or VSS | 4 | |
| Output Leakage Current | ILO | 0.05 | 3 | μA | VOUT = VCC or VSS | 4 | |
| Input Low Level | VIL | -0.6 | V | 4 | |||
| Output Low Level | VOL2 | 0.4 | V | VCC = 3.0V IOL = 2.1mA | 4 | ||
| Output Low Level | VOL1 | 0.2 | V | VCC = 1.7V IOL = 0.15mA | 4 | ||
| Clock Frequency, SCL | fSCL | 400 | kHz | VCC = 1.7V | 5 | ||
| Clock Frequency, SCL | fSCL | 1000 | kHz | VCC = 2.5V, 2.7V, 5.0V | 5 | ||
| Clock Pulse Width Low | tLOW | 1.2 | μs | VCC = 1.7V | 5 | ||
| Clock Pulse Width Low | tLOW | 0.4 | μs | VCC = 2.5V, 2.7V, 5.0V | 5 | ||
| Clock Pulse Width High | tHIGH | 0.6 | μs | VCC = 1.7V | 5 | ||
| Clock Pulse Width High | tHIGH | 0.4 | μs | VCC = 2.5V, 2.7V, 5.0V | 5 | ||
| Noise Suppression Time | tI | 100 | ns | VCC = 1.7V | 5 | ||
| Noise Suppression Time | tI | 50 | ns | VCC = 2.5V, 2.7V, 5.0V | 5 | ||
| Clock Low to Data Out Valid | tAA | 0.1 | 0.9 | μs | VCC = 1.7V | 5 | |
| Clock Low to Data Out Valid | tAA | 0.05 | 0.55 | μs | VCC = 2.5V, 2.7V, 5.0V | 5 | |
| Bus free time before new transmission | tBUF | 1.2 | μs | VCC = 1.7V | 5 | ||
| Bus free time before new transmission | tBUF | 0.5 | μs | VCC = 2.5V, 2.7V, 5.0V | 5 | ||
| Start Condition Hold Time | tHD.STA | 0.6 | μs | VCC = 1.7V | 5 | ||
| Start Condition Hold Time | tHD.STA | 0.25 | μs | VCC = 2.5V, 2.7V, 5.0V | 5 | ||
| Start Condition Setup Time | tSU.STA | 0.6 | μs | VCC = 1.7V | 5 | ||
| Start Condition Setup Time | tSU.STA | 0.25 | μs | VCC = 2.5V, 2.7V, 5.0V | 5 | ||
| Data In Hold Time | tHD.DAT | 0 | μs | VCC = 1.7V | 5 | ||
| Data In Setup Time | tSU.DAT | 100 | ns | VCC = 1.7V | 5 | ||
| Inputs Rise Time | tR | 0.3 | μs | VCC = 1.7V | 5 | ||
| Inputs Fall Time | tF | 300 | ns | VCC = 1.7V | 5 | ||
| Inputs Fall Time | tF | 100 | ns | VCC = 2.5V, 2.7V, 5.0V | 5 | ||
| Stop Condition Setup Time | tSU.STO | 0.6 | μs | VCC = 1.7V | 5 | ||
| Stop Condition Setup Time | tSU.STO | 0.25 | μs | VCC = 2.5V, 2.7V, 5.0V | 5 | ||
| Data Out Hold Time | tDH | 50 | ns | VCC = 1.7V | 5 | ||
| Write Cycle Time | tWR | 5 | ms | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | U = Green, Matte Sn Lead Finish, | 12 |
CAD (KiCad official)
- Symbol:
AT24C16C-SSHM-B - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
at24c16c-sshm-b-etched.step/at24c16c-sshm-b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at24c16c-sshm-b.step/at24c16c-sshm-b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (23 pp, sha256
72c6f7b17a742444, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).