Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XL2576S-ADJE1

3D generated from the datasheet; KiCad's model does not fit this maker's body.

XLSEMI · DC-DC Converters · TO-263-5

XL2576S-ADJE1 from XLSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Supply Voltage Input Pin. Operates from 4.5V to 40V DC. Bypass VIN to GND with a suitably large capacitor to eliminate input noise. Absolute max 45V.
2 SW passive Power Switch Output Pin. Switch node that supplies power to the output inductor and Schottky catch diode. Rated for VSW = -0.3V to VIN.
3 GND power_in Ground Pin. Must be routed carefully - place outside the Schottky diode to output-capacitor ground path to prevent switching current spikes from inducing noise. Also connected internally to the metal tab.
4 FB input Feedback Pin. Through an external resistor divider, senses the output voltage and regulates it. Feedback threshold voltage is 1.23V. Absolute max: -0.3V to VIN.
5 EN input Enable Pin. Drive EN low to turn on the device, drive high to turn it off. Floating defaults to low (enabled). VEN threshold: 1.4V high (off) / 0.8V low (on). Absolute max: -0.3V to VIN.
6 GND power_in Package tab (pad 6). printed: Metal Tab GND.

Key specifications

Parameter Value
Manufacturer XLSEMI
Package TO-263-5
Category PMIC
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (XL2576-ADJ) VOUT 1.193 1.23 1.267 V Vin = 4.5V to 40V, Iload=0.2A to 3A 6
Input operation voltage Vin 4.5 40 V 7
Shutdown Supply Current IS 80 200 uA VEN=5V 7
Quiescent Supply Current Iq 2 10 mA VEN=0V, VFB=Vin 7
Oscillator Frequency Fosc 40 52 64 Khz 7
Switch Current Limit IL 3.6 4.8 6.9 A VFB=0V 7
EN Pin Threshold High (Regulator OFF) VEN 1.4 V High (Regulator OFF) 7
EN Pin Threshold Low (Regulator ON) VEN 0.8 V Low (Regulator ON) 7
EN Pin Input Leakage Current (OFF) IH 5 15 uA VEN=2.5V (OFF) 7
EN Pin Input Leakage Current (ON) IL 0.2 5 uA VEN=0.5V (ON) 7
Output Saturation Voltage VCE 1.3 1.5 V VFB=0V, Iout=3A 7
Max Duty Cycle DMAX 100 % VFB=0V 7
Input Voltage Vin -0.3 45 V 5
Feedback Pin Voltage VFB -0.3 V Upper limit printed as Vin (not numeric) 5
EN Pin Voltage VEN -0.3 V Upper limit printed as Vin (not numeric) 5
Output Switch Pin Voltage VSW -0.3 V Upper limit printed as Vin (not numeric) 5
ESD (HBM) 2000 V Printed as >2000 5
Operating Junction Temperature TJ -40 125 oC 5
Storage Temperature TSTG -65 150 oC 5
Lead Temperature (Soldering, 10 sec) TLEAD 260 oC Soldering, 10 sec 5
Thermal Resistance (Junction to Ambient) RJA 30 oC /W Junction to Ambient, No Heatsink, Free Air 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: XL2576S-ADJE1
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5, generated on the KiCad land (body 8.7 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: xl2576s-adje1-etched.step / xl2576s-adje1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl2576s-adje1.step / xl2576s-adje1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XLSEMI datasheet (15 pp, sha256 c3857bfcd9cf7c08, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF