component
SWPDBV33EF-100.000000D
Public Made by Adomby adom
Starwave Pre-Programmed Oscillators, SMD2520-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSWPDBV33EF-100.000000D
Starwave · Pre-Programmed Oscillators · SMD2520-4P
SWPDBV33EF-100.000000D from Starwave, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Tri-State | input | Output enable input: the output is enabled when held at or above 0.7 x VDD and disabled when held at or below 0.3 x VDD. |
| 2 | GND | power_in | Ground pad; a 0.1 µF by-pass capacitor should be placed as close to the part as possible between the VDD and GND pads for optimal oscillator performance. |
| 3 | Output | output | Clock output with high level at least 90% of VDD and low level at most 10% of VDD, with 10%-90% rise/fall time of 2 ns at 3.3 V (3 ns at 1.8 V) into a 15 pF load. |
| 4 | VDD | power_in | Supply voltage pin for 1.8 V, 2.5 V or 3.3 V operation, with supply variation of ±5% of the nominal VDD per the electrical specification. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Starwave |
| Package | SMD2520-4P |
| Category | Crystal Oscillator/Oscillator/Resonator |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Range (3.3V column) | 1 | 200 | MHz | VDD 3.3V column | 1 | ||
| Supply Current (@15pF loading) | 35 | mA | @15pF loading, 3.3V column | 1 | |||
| Output High | 90 | %VDD | 3.3V column | 1 | |||
| Output Low | 10 | %VDD | 3.3V column | 1 | |||
| Transition Time Rise / Fall Time | 2 | nSec | 1 | ||||
| Duty Cycle | 45 | 55 | % | 3.3V column | 1 | ||
| Startup Time | 8 | mSec | 3.3V column | 1 | |||
| Tri-State Output Enable | 0.7 | x VDD | 3.3V column | 1 | |||
| Tri-State Output Disable | 0.3 | x VDD | 3.3V column | 1 | |||
| Stand by Current (@PD Mode) | 400 | uA | @PD mode, 3.3V column | 1 | |||
| Stand by Current (@OE Mode) | 20 | mA | @OE mode, 3.3V column | 1 | |||
| RMS Phase Jitter | 2 | pSec | 12KHz to 20MHz, 3.3V column | 1 | |||
| Aging (First Year) | 3 | ppm | @ 25 C, first year, 3.3V column | 1 | |||
| Storage Temp. Range | -50 | 125 | oC | 1 | |||
| Frequency Stability (code B) | -20 | 20 | ppm | Part-number code B (±20 ppm), industrial -40 to 85 C per ordering code | 2 | ||
| Operating Temperature Range (industrial, code V) | -40 | 85 | oC | Part-number code V, Industrial | 2 |
CAD (KiCad official)
- Symbol:
SWPDBV33EF-100.000000D - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
swpdbv33ef-100-000000d-etched.step/swpdbv33ef-100-000000d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);swpdbv33ef-100-000000d.step/swpdbv33ef-100-000000d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Starwave datasheet (2 pp, sha256
77f70b5c450ced76, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).