component
TP6062FX
Public Made by Adomby adom
Shenzhen JingYang Power Distribution Switches, SOT23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTP6062FX
Shenzhen JingYang · Power Distribution Switches · SOT23-5
TP6062FX from Shenzhen JingYang, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Switch output, the source of the output P-MOSFET, typically connected to the switched side of the load; OUT must be connected to the load and is rated 0 to 5.5V in recommended operating conditions (absolute maximum VOUT is -0.3V to VIN+0.3V). |
| 2 | GND | power_in | IC ground connection, and EN must never be driven negative with respect to GND. |
| 3 | FLG | output | Open-drain active-low fault flag that is asserted after a 12 ms deglitch on over-current, and also on over-temperature and output reverse-voltage conditions; recommended FLG voltage range is 0 to 5.5V, and the datasheet example uses a 10 kΩ pull-up. |
| 4 | EN | input | Logic-level enable input that must be driven high or low and must never float; the high-level enable threshold is 2 V minimum and the low-level threshold is 0.8 V maximum, with EN rated -0.3 V to VIN+0.3 V. |
| 5 | IN | power_in | Input supply, the drain of the output MOSFET that also powers the IC's internal circuitry, to be connected to the positive supply over the 2.5 V to 5.5 V input range (absolute maximum 7 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen JingYang |
| Package | SOT23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TP6062FX - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5 (KiCad packages3D, STEP)
- 3D model files:
tp6062fx-etched.step/tp6062fx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tp6062fx.step/tp6062fx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen JingYang datasheet (11 pp, sha256
00f2efe53b2eb771, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).