3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownL7810CV-JSM
JSMSEMI · Linear Voltage Regulators (LDO) · TO-220-3
L7810CV-JSM from JSMSEMI, in a TO-220-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Unregulated input voltage pin; absolute maximum 35V for 5-18V output versions (40V for 24V), and for the 10V version the specified input range is 12.5V to 25V. |
| 2 | GND | power_in | Ground reference pin common to input and output. |
| 3 | OUT | power_out | Regulated output pin; 10V fixed (9.60V to 10.40V at Tj=25°C) for the L7810CV, with output current in excess of 1.5A and peak output current 1.8A typical limit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | TO-220-3 |
| Category | Power Management |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | Vo | 9.6 | 10 | 10.4 | V | Tj=25°C, IO=5mA - 1.0A | 3 |
| Output Voltage | Vo | 9.5 | 10.5 | V | VI =12.5V to 25V, IO=5mA - 1.0A, PD<=15W | 3 | |
| Load Regulation | ∆Vo | 100 | mV | Tj=25°C,IO=5mA - 1.5A | 3 | ||
| Load Regulation | ∆Vo | 50 | mV | Tj=25°C,IO=0.25A - 0.75A | 3 | ||
| Line Regulation | ∆Vo | 100 | mV | VI =13V to 25V,Tj=25°C | 3 | ||
| Quiescent Current | Iq | 8 | mA | Tj=25°C, IO=<1A | 3 | ||
| Quiescent Current Change | ∆Iq | 1 | mA | VI =12.6V to 25V | 3 | ||
| Quiescent Current Change | ∆Iq | 0.5 | mA | IO=5mA - 1.0A | 3 | ||
| Ripple Rejection | RR | 56 | 72 | dB | VI =13V - 23V,f=120Hz,Tj=25°C | 3 | |
| Peak Output Current | IPK | 1.8 | A | Tj=25°C | 3 | ||
| Short-Circuit Current | ISC | 250 | mA | VI=35V, Tj=25°C | 3 | ||
| Dropout Voltage | Vd | 2 | V | Tj=25°C | 3 | ||
| Output Noise Voltage | VN | 58 | µV | 10Hz<=f<=100kHz | 3 | ||
| Temperature coefficient of Vo | ∆Vo/∆T | -1.1 | mV/°C | Io=5mA | 3 | ||
| Input Voltage | VI | 35 | V | for Vo=5~18V | 1 | ||
| Output Current | Io | 1 | A | 1 | |||
| Operating Junction Temperature Range | TOPR | -20 | 150 | °C | 1 | ||
| Storage Temperature Range | TSTG | -55 | 150 | °C | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | Note 1: The Maximum steady state usable output current are dependent on input voltage, heat sinking, lead length of the package and copper pattern of PCB. The data above represents pulse test conditio | 5 |
CAD (KiCad official)
- Symbol:
L7810CV-JSM - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220-3 (KiCad packages3D, STEP)
- 3D model files:
l7810cv-jsm-etched.step/l7810cv-jsm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l7810cv-jsm.step/l7810cv-jsm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (6 pp, sha256
7f311da3e4c20c5a, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).