3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMPQ2451DJ-AEC1-LF-Z
Monolithic Power Systems · DC-DC Converters · TSOT-23-6
MPQ2451DJ-AEC1-LF-Z from Monolithic Power Systems, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | power_out | Bootstrap pin that supplies the internal floating high-side MOSFET driver and needs a bypass capacitor connected between it and SW. |
| 2 | GND | power_in | Ground pin, where the output capacitor should be connected as close as possible while avoiding routing near high-current switch paths. |
| 3 | FB | input | Feedback input to the error amplifier, connected to an external divider between output and GND and compared against the internal 0.8V reference. |
| 4 | EN | input | Enable input that shuts the chip down when pulled below the specified threshold and enables it when pulled above; floating it disables the chip. |
| 5 | VIN | power_in | Input supply pin for all internal control circuitry and the high-side switch, requiring a decoupling capacitor to ground close to the pin; the operating range is 3.3V to 36V. |
| 6 | SW | output | Switch node output of the high-side switch, requiring a low VF Schottky diode to ground close to the pin to reduce switching spikes. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 0.774 | 0.794 | 0.814 | V | 4.0V < VIN < 36V | 7 |
| Feedback Voltage | VFB | 0.766 | 0.794 | 0.822 | V | 3.3V < VIN < 4.0V | 7 |
| Oscillator Frequency | fSW | 1.4 | 2 | 2.6 | MHz | 7 | |
| Shutdown Supply Current | IS | 3 | 30 | μA | VEN < 0.3V | 7 | |
| Quiescent Supply Current | IQ | 130 | 200 | µA | No load, VFB=0.9, no switching | 7 | |
| Enable High Threshold | VIH | 1.35 | 1.5 | 1.8 | V | Low-to-High | 7 |
| Feedback Bias Current | 0.05 | 1 | μA | 7 | |||
| Upper Switch Leakage Current | 0.5 | 2 | μA | VEN = 0V, VSW = 0V | 7 | ||
| Current Limit | ILIM | 0.65 | 1 | A | 7 | ||
| VIN UVLO Up Threshold | 2.7 | 3.29 | V | 7 | |||
| Soft-Start Time | 0.5 | 1 | ms | FB from 0 to 0.794V | 7 | ||
| Upper Switch On Resistance | RDS(ON) | 500 | mΩ | VBST-VSW=5V, TJ= 25°C | 7 | ||
| COMP to Current Sense Transconductance | GCS | 3 | A/V | 7 | |||
| VIN UVLO Hysteresis | 0.4 | V | 7 | ||||
| Minimum Switch On Time | tON | 100 | ns | 7 | |||
| Thermal Shutdown | 150 | °C | 7 | ||||
| Enable Threshold Hysteresis | 400 | mV | 7 | ||||
| Supply Voltage VIN | VIN | 3.3 | 36 | V | 6 | ||
| Output Voltage VOUT | VOUT | 0.8 | V | max 0.9·VIN | 6 | ||
| Maximum Junction Temperature | TJ | 125 | °C | 6 | |||
| Supply Voltage (VIN) | VIN | -0.3 | 40 | V | 6 | ||
| Switch Voltage | VSW | -0.3 | V | max VIN+0.3V | 6 | ||
| BST to SW | -0.3 | 5 | V | 6 | |||
| All Other Pins | -0.3 | 5 | V | 6 | |||
| Continuous Power Dissipation | PD | 0.57 | W | TSOT23-6L, TA = 25°C | 6 | ||
| Junction Temperature | TJ | 150 | °C | 6 | |||
| Lead Temperature | 260 | °C | 6 | ||||
| Storage Temperature | TSTORE | -65 | 150 | °C | 6 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 220 | °C/W | TSOT23-6L, JESD51-7 4-layer PCB | 6 | ||
| Thermal Resistance Junction-to-Case | θJC | 110 | °C/W | TSOT23-6L, JESD51-7 4-layer PCB | 6 |
CAD (KiCad official)
- Symbol:
MPQ2451DJ-AEC1-LF-Z - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mpq2451dj-aec1-lf-z-etched.step/mpq2451dj-aec1-lf-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mpq2451dj-aec1-lf-z.step/mpq2451dj-aec1-lf-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet, copy hosted by LCSC (23 pp, sha256
58784441474587a2, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).