3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSC95F8572M20U
SOC(Shenzhen SinOne Microelectronics) · Microcontrollers (MCU/MPU/SOC) · SOP-20
SC95F8572M20U from SOC(Shenzhen SinOne Microelectronics), in a SOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply; operating range 2.0V to 5.5V. |
| 2 | P1.0/CMOD | bidirectional | GPIO P1.0 or CMOD, the external capacitor pin of the Touch Key circuit. |
| 3 | VSS | power_in | Ground. |
| 4 | P1.1/INT01/TK22/RST | bidirectional | GPIO P1.1, external interrupt 0 input 1 (INT01), touch key channel 22 (TK22), or reset pin RST when configured by Code Option. |
| 5 | P1.2/INT02/T0/RX0/TK21/tCK | bidirectional | GPIO P1.2, external interrupt 0 input 2, T0 counter external input, UART0 receive (RX0), touch key channel 21, or programming/emulation clock line tCK (avoid TK21 when using TK debug). |
| 6 | P1.3/INT03/T1/TX0/TK20/tDIO | bidirectional | GPIO P1.3, external interrupt 0 input 3, T1 counter external input, UART0 transmit (TX0), touch key channel 20, or programming/emulation data line tDIO (avoid TK20 when using TK debug). |
| 7 | P1.4/INT10/USRX2/AIN9/TK19 | bidirectional | GPIO P1.4, external interrupt 1 input 0, USCI2 MISO/RX, ADC input channel 9, or touch key channel 19. |
| 8 | P1.5/INT11/USTX2/AIN8/TK18 | bidirectional | GPIO P1.5, external interrupt 1 input 1, USCI2 MOSI/SDA/TX, ADC input channel 8, or touch key channel 18. |
| 9 | P2.7/PWM07/AIN5/TK15 | bidirectional | GPIO P2.7, PWM07 output, ADC input channel 5, or touch key channel 15. |
| 10 | P2.6/USCK2/PWM06/AIN4/TK14 | bidirectional | GPIO P2.6, USCI2 SCK, PWM06 output, ADC input channel 4, or touch key channel 14. |
| 11 | P2.5/T4/PWM40/PWM05/AIN3/TK13 | bidirectional | GPIO P2.5, T4 counter external input, PWM40 and PWM05 outputs, ADC input channel 3, or touch key channel 13. |
| 12 | P2.4/T4EX/PWM41/PWM04/AIN2/TK12 | bidirectional | GPIO P2.4, Timer4 external capture input (T4EX), PWM41 and PWM04 outputs, ADC input channel 2, or touch key channel 12. |
| 13 | P2.1/INT25/AIN11/USRX0/TK9 | bidirectional | GPIO P2.1, external interrupt 2 input 5, ADC input channel 11, USCI0 MISO/RX, or touch key channel 9. |
| 14 | P2.0/INT24/AIN10/USTX0/TK8 | bidirectional | GPIO P2.0, external interrupt 2 input 4, ADC input channel 10, USCI0 MOSI/SDA/TX, or touch key channel 8. |
| 15 | P0.5/INT21/USCK0/TK5 | bidirectional | GPIO P0.5, external interrupt 2 input 1, USCI0 SCK, or touch key channel 5. |
| 16 | P0.4/INT20/USCK1/FLT/TK4 | bidirectional | GPIO P0.4, external interrupt 2 input 0, USCI1 SCK, PWM fault detection input (FLT), or touch key channel 4. |
| 17 | P0.3/USTX1/PWM03/TK3 | bidirectional | GPIO P0.3, USCI1 MOSI/SDA/TX, PWM03 output, or touch key channel 3. |
| 18 | P0.2/USRX1/PWM02/TK2 | bidirectional | GPIO P0.2, USCI1 MISO/RX, PWM02 output, or touch key channel 2. |
| 19 | P0.1/T3/PWM30/PWM01/TK1 | bidirectional | GPIO P0.1, T3 counter external input, PWM30 and PWM01 outputs, or touch key channel 1. |
| 20 | P0.0/T3EX/PWM31/PWM00/TK0 | bidirectional | GPIO P0.0, Timer3 external capture input (T3EX), PWM31 and PWM00 outputs, or touch key channel 0. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SOC(Shenzhen SinOne Microelectronics) |
| Package | SOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC supply voltage | VDD/VSS | -0.3 | 5.5 | V | 110 | ||
| Voltage on any pin | Voltage ON any Pin | -0.3 | V | max VDD+0.3 | 110 | ||
| Operating ambient temperature | TA | -40 | 105 | ℃ | 110 | ||
| Storage temperature | TSTG | -55 | 125 | ℃ | 110 | ||
| Current through VDD | IVDD | 200 | mA | 110 | |||
| Current through VSS | IVSS | 200 | mA | 110 | |||
| Operating voltage | VDD | 2 | 5.5 | V | system clock 32MHz | 110 | |
| Operating ambient temperature | TA | -40 | 105 | ℃ | 110 | ||
| Flash endurance | NEND | 100000 | Cycles | 110 | |||
| Data retention | TDR | 100 | Years | TA = +25℃ | 110 | ||
| Full erase time | TErase | 30 | 40 | ms | TA = +25℃ | 110 | |
| Sector erase time | TS-Erase | 5 | ms | TA = +25℃ | 110 | ||
| Byte write time | TWrite | 30 | μs | TA = +25℃ | 110 | ||
| Base Timer current | IBTM | 1.3 | 3 | μA | VDD=5V, BTMFS[3:0]=1000, interrupt every 4.0 s | 110 | |
| WDT current | IWDT | 1.3 | 3 | μA | VDD=5V, WDTCKS[2:0]=000, WDT overflow 500ms | 110 | |
| Touch key operating current | ITK1 | 0.8 | 1.2 | mA | VDD=5V | 110 | |
| Input high voltage | VIH1 | 0.7 | V | VDD=5V, GPIO; min 0.7VDD, max VDD+0.3 | 111 | ||
| Input low voltage | VIL1 | -0.3 | V | VDD=5V, GPIO; max 0.3VDD | 111 | ||
| Schmitt input high voltage | VIH2 | 0.8 | V | VDD=5V, Schmitt inputs; min 0.8VDD, max VDD | 111 | ||
| Schmitt input low voltage | VIL2 | -0.2 | V | VDD=5V, Schmitt inputs; max 0.2VDD | 111 | ||
| Touch key operating current | ITK2 | 0.7 | 1 | mA | VDD=3.3V | 111 | |
| Power down wake-up time | TPDW | 60 | 130 | μs | VDD = 2.4V ~ 5.5V, TA = 25℃ | 112 | |
| Reset pulse width | TReset | 18 | μs | active low | 112 | ||
| RC oscillator stability | fHRC | 31.68 | 32 | 32.32 | MHz | VDD=2.0 |
112 |
| ADC supply voltage 1 | VAD1 | 2.7 | 5 | 5.5 | V | Vref = 2.048V | 112 |
| ADC supply voltage 2 | VAD2 | 2 | 5 | 5.5 | V | Vref = 1.024V or Vref = VDD | 112 |
| ADC supply voltage 3 | VAD3 | 2.7 | 5 | 5.5 | V | Vref = 2.4V | 112 |
| Internal reference 2.048V | VREF1 | 2.028 | 2.048 | 2.07 | V | VDD = 2.7~5.5V | 112 |
| Internal reference 1.024V | VREF2 | 1.004 | 1.024 | 1.044 | V | VDD = 2.0~5.5V | 112 |
| Internal reference 2.4V | VREF3 | 2.37 | 2.4 | 2.45 | V | VDD = 2.7~5.5V | 112 |
| ADC conversion current 1 | IADC1 | 2 | mA | ADC module on, VDD=5V | 112 | ||
| ADC conversion current 2 | IADC2 | 1.8 | mA | ADC module on, VDD=3.3V | 112 | ||
| ADC input resistance | RAIN | 1 | MΩ | VIN=5V | 112 | ||
| Differential nonlinearity | DNL | -3 | 3 | LSB | VDD=5V VREF=5V | 113 | |
| Integral nonlinearity | INL | -3 | 3 | LSB | VDD=5V VREF=5V | 113 | |
| ADC conversion time 1 | TADC1 | 1.1 | 1.4 | μs | fSYS=32MHz LOWSP[2:0]=100 | 113 | |
| ADC conversion time 2 | TADC2 | 1.2 | 1.5 | μs | fSYS=32MHz LOWSP[2:0]=101 | 113 | |
| ADC conversion time 3 | TADC3 | 1.5 | 1.9 | μs | fSYS=32MHz LOWSP[2:0]=110 | 113 | |
| ADC conversion time 4 | TADC4 | 2 | 2.6 | μs | fSYS=32MHz LOWSP[2:0]=111 | 113 | |
| Operating current | Iop1 | 4.5 | mA | VDD=5V, fSYS=32MHz | 110 | ||
| Power Down standby current | Ipd1 | 2 | μA | VDD=5V | 110 | ||
| Output low current | IOL1 | 27 | mA | VDD=5V, VPin=0.4V | 111 | ||
| Pull-up resistor | RPH1 | 30 | kΩ | VDD=5V | 111 | ||
| Pull-up resistor | RPH2 | 55 | kΩ | VDD=3.3V | 112 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PBT | BTM Base timer BTMIF EBTM IPBTM 004BH 10 9 H/W Auto 能 | 46 |
CAD (KiCad official)
- Symbol:
SC95F8572M20U - Footprint:
Package_SO:SOP-20_7.5x12.8mm_P1.27mm - 3D model: SOP-20, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 2.65 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
sc95f8572m20u-etched.step/sc95f8572m20u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc95f8572m20u.step/sc95f8572m20u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (126 pp, sha256
f88562a985ddaf64, retrieved 2026-10-31, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).