3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLMK00304SQ
Texas Instruments · Clock Buffers, Drivers, Distributors · WQFN-32-EP(5x5)
LMK00304SQ from Texas Instruments, in a WQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. |
| 2 | VCCOA | power_in | Power supply for Bank A output buffers, operating from 3.3 V or 2.5 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each VCCO pin. |
| 3 | CLKoutA0 | output | Differential clock output A0; output type is set by the CLKout_TYPE pins. |
| 4 | CLKoutA0* | output | Complementary differential clock output A0; output type is set by the CLKout_TYPE pins. |
| 5 | VCCOA | power_in | Power supply for Bank A output buffers, operating from 3.3 V or 2.5 V; internally tied to the other VCCOA pin and bypassed with a 0.1 uF low-ESR capacitor. |
| 6 | CLKoutA1 | output | Differential clock output A1; output type is set by the CLKout_TYPE pins. |
| 7 | CLKoutA1* | output | Complementary differential clock output A1; output type is set by the CLKout_TYPE pins. |
| 8 | GND | power_in | Ground pin. |
| 9 | CLKout_TYPE0 | input | Bank A and Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 10 | VCC | power_in | Power supply for core and input buffer blocks, operating from 3.3 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each VCC pin. |
| 11 | OSCin | input | Input for crystal; can also be driven by an XO, TCXO, or other external single-ended clock. |
| 12 | OSCout | output | Output for crystal; leave floating if OSCin is driven by a single-ended clock. |
| 13 | CLKin_SEL0 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 14 | CLKin0 | input | Universal clock input 0, accepting differential or single-ended signals. |
| 15 | CLKin0* | input | Complementary universal clock input 0, accepting differential or single-ended signals. |
| 16 | CLKin_SEL1 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 17 | GND | power_in | Ground pin. |
| 18 | CLKoutB1* | output | Complementary differential clock output B1; output type is set by the CLKout_TYPE pins. |
| 19 | CLKoutB1 | output | Differential clock output B1; output type is set by the CLKout_TYPE pins. |
| 20 | VCCOB | power_in | Power supply for Bank B output buffers, operating from 3.3 V or 2.5 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each VCCO pin. |
| 21 | CLKoutB0* | output | Complementary differential clock output B0; output type is set by the CLKout_TYPE pins. |
| 22 | CLKoutB0 | output | Differential clock output B0; output type is set by the CLKout_TYPE pins. |
| 23 | VCCOB | power_in | Power supply for Bank B output buffers, operating from 3.3 V or 2.5 V; internally tied to the other VCCOB pin and bypassed with a 0.1 uF low-ESR capacitor. |
| 24 | GND | power_in | Ground pin. |
| 25 | NC | unconnected | Not connected internally; may be floated, grounded, or tied to any potential within the Supply Voltage range in the Absolute Maximum Ratings. |
| 26 | CLKin1* | input | Complementary universal clock input 1, accepting differential or single-ended signals. |
| 27 | CLKin1 | input | Universal clock input 1, accepting differential or single-ended signals. |
| 28 | VCC | power_in | Power supply for core and input buffer blocks, operating from 3.3 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each VCC pin. |
| 29 | REFout | output | LVCMOS reference output; enabled by pulling REFout_EN high. |
| 30 | VCCOC | power_in | Power supply for REFout buffer, operating from 3.3 V or 2.5 V; bypass with a 0.1 uF low-ESR capacitor placed very close to the VCCO pin. |
| 31 | REFout_EN | input | REFout enable input, internally synchronized to the selected clock input; CMOS control input with internal pull-down resistor. |
| 32 | CLKout_TYPE1 | input | Bank A and Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 33 | DAP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-32-EP(5x5) |
| Category | Clock/Timing |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC, VCCO Supply Voltages | VCC, VCCO | -0.3 | 3.6 | V | over operating free-air temperature range | 6 | |
| Input Voltage | VIN | -0.3 | V | max VCC + 0.3 | 6 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 6 | ||
| Lead Temperature (solder 4 s) | TL | 260 | °C | solder 4 s | 6 | ||
| Junction Temperature | TJ | 150 | °C | 6 | |||
| Ambient Temperature Range | TA | -40 | 25 | 85 | °C | 6 | |
| Junction Temperature | TJ | 125 | °C | 6 | |||
| Core Supply Voltage Range | VCC | 3.15 | 3.3 | 3.45 | V | 6 | |
| Junction-to-ambient thermal resistance | RθJA | 38.1 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 7.2 | °C/W | 6 | |||
| Core Supply Current, All Outputs Disabled | ICC_CORE | 8.5 | 10.5 | mA | CLKinX selected | 7 | |
| Additive Core Supply Current, LVPECL Banks Enabled | ICC_PECL | 38 | 48 | mA | 7 | ||
| Additive Core Supply Current, LVDS Banks Enabled | ICC_LVDS | 43 | 52 | mA | 7 | ||
| Additive Core Supply Current, HCSL Banks Enabled | ICC_HCSL | 50 | 58.5 | mA | 7 | ||
| Additive Core Supply Current, LVCMOS Output Enabled | ICC_CMOS | 3.5 | 5.5 | mA | 7 | ||
| Additive Output Supply Current, LVPECL Banks Enabled | ICCO_PECL | 135 | 163 | mA | Includes Output Bank Bias and Load Currents for both banks, RT = 50 Ω to Vcco, 2 V on all outputs | 7 | |
| Additive Output Supply Current, LVDS Banks Enabled | ICCO_LVDS | 25 | 34.5 | mA | 7 | ||
| Additive Output Supply Current, HCSL Banks Enabled | ICCO_HCSL | 65 | 81.5 | mA | Includes Output Bank Bias and Load Currents for both banks, RT = 50 Ω on all outputs | 7 | |
| Additive Output Supply Current, LVCMOS Output Enabled | ICCO_CMOS | 9 | 10 | mA | 200 MHz, CL = 5 pF, Vcco = 3.3 V ± 5% | 7 | |
| High-Level Input Voltage | VIH | 1.6 | V | max Vcc | 7 | ||
| Low-Level Input Voltage | VIL | 0.4 | V | min GND | 7 | ||
| Low-Level Input Current | IIL | -5 | 0.1 | µA | VIL = 0 V, Internal pulldown resistor | 7 | |
| Input Frequency Range | fCLKin | 3.1 | GHz | Functional up to 3.1 GHz | 8 | ||
| Differential Input Voltage Swing | VID | 0.15 | 1.3 | V | 8 | ||
| Single-Ended Input Voltage Swing | VI_SE | 0.3 | 2 | Vpp | single-ended input; limited to 2 Vpp max for clock input frequency < 100 MHz (note 8) | 8 | |
| Mux Isolation, CLKin0 to CLKin1 | ISOMUX | -84 | dBc | fOFFSET > 50 kHz, PCLKinX = 0 dBm, fCLKin0 = 100 MHz | 8 | ||
| External Clock Frequency Range | FCLK | 250 | MHz | OSCin driven single-ended, OSCout floating | 8 | ||
| Crystal Frequency Range | FXTAL | 10 | 40 | MHz | Fundamental mode crystal, ESR ≤ 200 Ω (10 to 30 MHz), ESR ≤ 125 Ω (30 to 40 MHz) | 8 | |
| Maximum Output Frequency Full VOD Swing | fCLKout_FS | 1 | 1.2 | GHz | LVPECL, Vcco = 3.3 V ± 5%, RT = 160 Ω to GND, VOD ≥ 600 mV, RL = 100 Ω differential | 9 | |
| Maximum Output Frequency Reduced VOD Swing | fCLKout_RS | 1.5 | 3.1 | GHz | LVPECL, Vcco = 3.3 V ± 5%, RT = 160 Ω to GND, VOD ≥ 400 mV, RL = 100 Ω differential | 9 | |
| Additive RMS Jitter, Integration Bandwidth 10 kHz to 20 MHz | JitterADD | 77 | 98 | fs | LVPECL, Vcco = 3.3 V, CLKin: 100 MHz, Slew rate ≥ 3 V/ns | 9 | |
| Additive RMS Jitter, Integration Bandwidth 10 kHz to 20 MHz | JitterADD | 54 | 78 | fs | LVPECL, Vcco = 3.3 V, CLKin: 156.25 MHz, Slew rate ≥ 3 V/ns | 9 | |
| Duty Cycle | DUTY | 45 | 55 | % | LVPECL, 50% input clock duty cycle | 9 | |
| Output Voltage Swing | VOD | 600 | 830 | 1000 | mV | LVPECL | 9 |
| Output Rise Time | tR | 175 | 300 | ps | LVPECL, 20% to 80%, RT = 160 Ω to GND, RL = 100 Ω differential, CL ≤ 5 pF | 10 | |
| Output Fall Time | tF | 175 | 300 | ps | LVPECL, 80% to 20%, RT = 160 Ω to GND, RL = 100 Ω differential, CL ≤ 5 pF | 10 | |
| Propagation Delay CLKin-to-LVPECL | tPD_PECL | 180 | 360 | 540 | ps | RT = 160 Ω to GND, RL = 100 Ω differential, CL ≤ 5 pF | 13 |
| Maximum Output Frequency Full VOD Swing | fCLKout_FS | 1 | 1.6 | GHz | LVDS, VOD ≥ 250 mV, RL = 100 Ω differential | 10 | |
| Maximum Output Frequency Reduced VOD Swing | fCLKout_RS | 1.5 | 2.1 | GHz | LVDS, VOD ≥ 200 mV, RL = 100 Ω differential | 10 | |
| Additive RMS Jitter, Integration Bandwidth 10 kHz to 20 MHz | JitterADD | 94 | 115 | fs | LVDS, RL = 100 Ω differential, CLKin: 100 MHz, Slew rate ≥ 3 V/ns | 10 | |
| Duty Cycle | DUTY | 45 | 55 | % | LVDS, 50% input clock duty cycle | 10 | |
| Output Voltage Swing | VOD | 250 | 400 | 450 | mV | LVDS, TA = 25°C, DC Measurement, RL = 100 Ω differential | 10 |
| Change in Magnitude of VOD for Complementary Output States | ΔVOD | -50 | 50 | mV | LVDS | 10 | |
| Output Offset Voltage | VOS | 1.125 | 1.25 | 1.375 | V | LVDS | 10 |
| Propagation Delay CLKin-to-LVDS | tPD_LVDS | 200 | 400 | 600 | ps | RL = 100 Ω differential, CL ≤ 5 pF | 13 |
| Output Frequency Range | fCLKout | 400 | MHz | HCSL, RL = 50 Ω to GND, CL ≤ 5 pF | 11 | ||
| Duty Cycle | DUTY | 45 | 55 | % | HCSL, 50% input clock duty cycle | 11 | |
| Output High Voltage | VOH | 520 | 810 | 920 | mV | HCSL, TA = 25°C, DC Measurement, RT = 50 Ω to GND | 11 |
| Output Low Voltage | VOL | -150 | 0.5 | 150 | mV | HCSL | 11 |
| Absolute Crossing Voltage | VCROSS | 250 | 350 | 460 | mV | HCSL, RL = 50 Ω to GND, CL ≤ 5 pF | 11 |
| Output Rise Time | tR | 300 | 500 | ps | HCSL, 20% to 80%, 250 MHz, RL = 50 Ω to GND, CL ≤ 5 pF | 11 | |
| Output Fall Time | tF | 300 | 500 | ps | HCSL, 80% to 20%, RL = 50 Ω to GND, CL ≤ 5 pF | 11 | |
| Propagation Delay CLKin-to-HCSL | tPD_HCSL | 295 | 590 | 885 | ps | RT = 50 Ω to GND, CL ≤ 5 pF | 13 |
| Output Skew LVPECL/LVDS/HCSL | tSK(O) | 30 | 50 | ps | Skew between any two CLKouts with the same buffer type | 13 | |
| Maximum Output Frequency (LVCMOS) | fCLKout | 250 | MHz | REFout LVCMOS, CL ≤ 5 pF | 12 | ||
| Duty Cycle | DUTY | 45 | 55 | % | LVCMOS, 50% input clock duty cycle | 12 | |
| Output Low Voltage | VOL | 0.1 | V | LVCMOS, 1-mA load | 12 | ||
| Output Enable Time | tEN | 3 | cycles | LVCMOS, CL ≤ 5 pF | 12 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | (1) Any unused output pins should be left floating with minimum copper length (see note in Clock Outputs), or properly terminated if | 5 |
CAD (KiCad official)
- Symbol:
LMK00304SQ - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: WQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
lmk00304sq-etched.step/lmk00304sq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmk00304sq.step/lmk00304sq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
0e8ba3d15a7f8248, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).