Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

M24C08-DRMN8TP

STMicroelectronics · EEPROM · SOP-8

M24C08-DRMN8TP from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected internally; the datasheet's 8-pin connection figure shows it as NC.
2 NC unconnected Not connected internally; the datasheet's 8-pin connection figure shows it as NC.
3 E2 input Chip Enable input that sets the value looked for on bit b3 of the device select code; tie it to VCC or VSS, and if left floating it is read as low (0).
4 VSS power_in Ground, the reference for the VCC supply voltage.
5 SDA bidirectional Serial data input/output with an open-drain output that can be wire-OR'ed on the bus; it needs a pull-up resistor to VCC.
6 SCL input Serial clock input that strobes data in and out on SDA.
7 WC input Write Control input; write operations are disabled for the entire memory array when it is driven high, and enabled when it is driven low or left floating.
8 VCC power_in Supply voltage pin, rated 1.7 V to 5.5 V (operating); decouple it with 10 nF to 100 nF close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOP-8
Category Memory
Pins 8

CAD (KiCad official)

  • Symbol: M24C08-DRMN8TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: m24c08-drmn8tp-etched.step / m24c08-drmn8tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24c08-drmn8tp.step / m24c08-drmn8tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (42 pp, sha256 7fbcd48ebcc652d7, retrieved 2026-10-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF