component
AD8572M
Public Made by Adomby adom
HGSEMI Operational Amplifier, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD8572M
HGSEMI · Operational Amplifier · SOP-8
AD8572M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel A amplifier output with rail-to-rail swing. |
| 2 | INA- | input | Channel A inverting input; input range VSS-0.5V to VDD+0.5V absolute maximum. |
| 3 | INA+ | input | Channel A non-inverting input; input range VSS-0.5V to VDD+0.5V absolute maximum. |
| 4 | VSS | power_in | Negative supply (ground in single-supply operation); bypass with 0.1µF ceramic capacitor in dual-supply operation. |
| 5 | INB+ | input | Channel B non-inverting input; input range VSS-0.5V to VDD+0.5V absolute maximum. |
| 6 | INB- | input | Channel B inverting input; input range VSS-0.5V to VDD+0.5V absolute maximum. |
| 7 | OUTB | output | Channel B amplifier output with rail-to-rail swing. |
| 8 | VDD | power_in | Positive supply, 1.8V to 5.5V operating (7.5V absolute maximum VDD to VSS); place a 0.1µF ceramic capacitor close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 1 | 5 | µV | 4 | ||
| Input Offset Voltage Drift | ∆VOS/∆T | 5 | 50 | nV/℃ | 4 | ||
| Input Bias Current | IB | 20 | pA | 4 | |||
| Input Offset Current | IOS | 10 | pA | 4 | |||
| Common-Mode Rejection Ratio | CMRR | 110 | dB | VCM = 0V to 5V | 4 | ||
| Large Signal Voltage Gain | AVO | 145 | dB | RL = 10kΩ, VO = 0.3V to 4.7V | 4 | ||
| Output Voltage High | VOH | 4.998 | V | RL = 100kΩ to - VS | 4 | ||
| Output Voltage High | VOH | 4.994 | V | RL = 10kΩ to - VS | 4 | ||
| Output Voltage Low | VOL | 2 | mV | RL = 100kΩ to + VS | 4 | ||
| Output Voltage Low | VOL | 5 | mV | RL = 10kΩ to + VS | 4 | ||
| Short Circuit Limit | ISC | 60 | mA | RL =10Ω to - VS | 4 | ||
| Output Current | IO | 65 | mA | 4 | |||
| Power Supply Rejection Ratio | PSRR | 115 | dB | VS = 2.5V to 5.5V | 4 | ||
| Quiescent Current | IQ | 220 | µA | VO = 0V, RL = 0Ω | 4 | ||
| Gain-Bandwidth Product | GBP | 1.8 | MHz | G = +100 | 4 | ||
| Slew Rate | SR | 0.95 | V/µs | RL = 10kΩ | 4 | ||
| Overload Recovery Time | 0.1 | ms | 4 | ||||
| Voltage Noise (en p-p) | en p-p | 0.3 | µVP-P | 0Hz to 10Hz | 4 | ||
| Voltage Noise Density | en | 38 | nV Hz | f = 1kHz | 4 | ||
| Power Supply Voltage (VDD to Vss) | -0.5 | 7.5 | V | 3 | |||
| PDB Input Voltage | 7 | V | 3 | ||||
| Operating Temperature Range | -45 | 125 | °C | 3 | |||
| Junction Temperature | 160 | °C | 3 | ||||
| Storage Temperature Range | -55 | 150 | °C | 3 | |||
| Lead Temperature | 245 | °C | soldering, 10sec | 3 | |||
| ESD Susceptibility HBM | 6 | KV | HBM | 3 | |||
| ESD Susceptibility MM | 400 | V | MM | 3 | |||
| Package Thermal Resistance SOP-8 | θJA | 125 | °C/W | TA=+25℃ | 3 | ||
| Supply Voltage, single supply | 1.8 | 5.5 | V | Single-Supply Operation | 1 | ||
| Supply Voltage, dual supply | 0.9 | 2.75 | V | Dual supply ±VS | 7 | ||
| Operating Temperature | -45 | 125 | °C | 1 |
CAD (KiCad official)
- Symbol:
AD8572M - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ad8572m-etched.step/ad8572m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8572m.step/ad8572m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (15 pp, sha256
846f6733a0c9bed3, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).