3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPCF2123TS
NXP Semicon · Real-time Clocks (RTC) · TSSOP-14
PCF2123TS from NXP Semicon, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OSCI | input | Oscillator input, a high-impedance node; minimize wire length between the quartz and the package. |
| 2 | OSCO | output | Oscillator output, a high-impedance node; minimize wire length between the quartz and the package. |
| 3 | n.c. | unconnected | Do not connect and do not use as feed-through; connect to VDD if floating pins are not allowed. |
| 4 | TEST | input | Test pin, not user accessible; connect to VSS or leave floating (internally pulled down). |
| 5 | INT | output | Interrupt output, open-drain and active LOW. |
| 6 | CE | input | Chip enable input, active HIGH, with internal pull-down. |
| 7 | VSS | power_in | Ground. |
| 8 | SDO | tri_state | Serial data output, push-pull; high-impedance when not driving; can be connected to SDI for a single-wire data line. |
| 9 | SDI | input | Serial data input; may float when CE is inactive. |
| 10 | SCL | input | Serial clock input; may float when CE is inactive. |
| 11 | n.c. | unconnected | Do not connect and do not use as feed-through; connect to VDD if floating pins are not allowed. |
| 12 | CLKOE | input | CLKOUT enable or disable pin; enable is active HIGH. |
| 13 | CLKOUT | output | Clock output, open-drain. |
| 14 | VDD | power_in | Supply voltage; positive or negative steps in VDD may affect oscillator performance, so 100 nF decoupling close to the device is recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | TSSOP-14 |
| Category | Clock and Timing |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
PCF2123TS - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
pcf2123ts-etched.step/pcf2123ts-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pcf2123ts.step/pcf2123ts.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (64 pp, sha256
3a32d6bdc538cb5e, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).