3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIL9961DT
IKSEMICON · LED Drivers · SOP-8
IL9961DT from IKSEMICON, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin, operating range 8 to 450 V DC (absolute maximum 470 V), from which the internal 7.5 V VDD supply is generated. |
| 2 | CS | input | Current-sense input of the LED current from the external MOSFET source resistor, compared against the internal 272 mV (or VLD·0.18) average-current threshold. |
| 3 | GND | power_in | Common ground pin. |
| 4 | GATE | output | Output driving the external MOSFET gate, with typical 100 mA minimum source/sink current at VDD = 7.5 V. |
| 5 | PWMD | input | Low-frequency PWM dimming input with high threshold of about 2 V, low threshold of about 0.8 V and 50 to 160 kOhm internal pull-down resistance. |
| 6 | VDD | power_out | Internally regulated supply voltage pin (about 7.5 V, max 12 V when externally supplied) requiring a low-ESR bypass capacitor. |
| 7 | LD | input | Linear dimming input accepting 0 to 1.5 V, which sets the CS threshold to VLD·0.18. |
| 8 | RT | passive | Connection pin for the external oscillator resistor that sets the fixed GATE off-time (about 32 to 48 us at 1 MOhm, 8 to 12 us at 226 kOhm). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | IKSEMICON |
| Package | SOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Internally controlled supply voltage | VDDR | 7.05 | 7.75 | V | VIN = 8 V, IDD(ext) = 0 mA, Tj = 25±10 °C | 6 | |
| Internally controlled supply voltage | VDDR | 7 | 8 | V | VIN = 8 V, IDD(ext) = 0 mA, Tj = -40~125 °C | 6 | |
| Internally controlled supply voltage | VDDR | 7.05 | 8.75 | V | VIN = 450 V, IDD(ext) = 0 mA, Tj = 25±10 °C | 6 | |
| Internally controlled supply voltage | VDDR | 7 | 9 | V | VIN = 450 V, IDD(ext) = 0 mA, Tj = -40~125 °C | 6 | |
| Non-stability of internally controlled voltage by load | ∆VDD(load) | 0.1 | V | VIN = 12.0 V, IDD(ext) = 1.0 mA, IDD(ext) = 0 mA, Tj = 25±10 °C | 6 | ||
| Non-stability of internally controlled voltage by load | ∆VDD(load) | 0.2 | V | VIN = 12.0 V, IDD(ext) = 1.0 mA, IDD(ext) = 0 mA, Tj = -40~125 °C | 6 | ||
| UVLO threshold, VDD rise | UVLORISE | 6.06 | 6.88 | V | VDD rises, Tj = 25±10 °C | 6 | |
| UVLO threshold, VDD rise | UVLORISE | 6 | 6.95 | V | VDD rises, Tj = -40~125 °C | 6 | |
| UVLO threshold, VDD fall | UVLOFAL | 5 | V | VDD falls, Tj = 25±10 °C | 6 | ||
| UVLO threshold, VDD fall | UVLOFAL | 4.8 | V | VDD falls, Tj = -40~125 °C | 6 | ||
| PWMD pin high level input voltage | VEN(hi) | 1.95 | V | VDD = VDDR, VIN = 450 V, Tj = 25±10 °C | 6 | ||
| PWMD pin high level input voltage | VEN(hi) | 2 | V | VDD = VDDR, VIN = 450 V, Tj = -40~125 °C | 6 | ||
| PWMD pin low level input voltage | VEN(lo) | 0.82 | V | VDD = VDDR, VIN = 8 V, Tj = 25±10 °C | 6 | ||
| PWMD pin low level input voltage | VEN(lo) | 0.8 | V | VDD = VDDR, VIN = 8 V, Tj = -40~125 °C | 6 | ||
| Attenuating resistance at PWMD pin | REN | 50 | 150 | kOhm | VPWM_D = 5 V, Tj = 25±10 °C | 6 | |
| Attenuating resistance at PWMD pin | REN | 45 | 160 | kOhm | VPWM_D = 5 V, Tj = -40~125 °C | 6 | |
| Average current control threshold voltage | VCS(AVG) | 264 | 280 | mV | VIN = 12.0 V, VLD = 3 V, VDD = VDDR, Tj = 25±10 °C | 6 | |
| Average current control threshold voltage | VCS(AVG) | 259 | 285 | mV | VIN = 12.0 V, VLD = 3 V, VDD = VDDR, Tj = -40~125 °C | 6 | |
| Average current control threshold voltage | VCS(LD) | 171 | 189.2 | mV | VIN = 12.0 V, VLD = 1 V, VDD = VDDR, Tj = 25±10 °C | 6 | |
| Average current control threshold voltage | VCS(LD) | 170 | 190 | mV | VIN = 12.0 V, VLD = 1 V, VDD = VDDR, Tj = -40~125 °C | 6 | |
| Driver switch-off voltage by LD input | VLD(OFF) | 100 | mV | VIN = 12.0 V, VDD = VDDR, VLD falls, Tj = 25±10 °C | 6 | ||
| Driver switch-off voltage by LD input | VLD(OFF) | 80 | mV | VIN = 12.0 V, VDD = VDDR, VLD falls, Tj = -40~125 °C | 6 | ||
| Driver switch-on voltage by LD input | VLD(ON) | 300 | mV | VIN = 12.0 V, VDD = VDDR, VLD rises, Tj = 25±10 °C | 6 | ||
| Driver switch-on voltage by LD input | VLD(ON) | 330 | mV | VIN = 12.0 V, VDD = VDDR, VLD rises, Tj = -40~125 °C | 6 | ||
| Absolute maximum current control threshold voltage | VCS(LIM) | 410 | 470 | mV | VDD = VDDR, VIN = 12.0 V, Tj = 25±10 °C | 7 | |
| Absolute maximum current control threshold voltage | VCS(LIM) | 390 | 490 | mV | VDD = VDDR, VIN = 12.0 V, Tj = -40~125 °C | 7 | |
| GATE pin high level output current | ISOURCE | -165 | mA | VDD = 7.5 V, VGATE = 0 V, Tj = 25±10 °C; printed /-165/ | 7 | ||
| GATE pin high level output current | ISOURCE | -100 | mA | VDD = 7.5 V, VGATE = 0 V, Tj = -40~125 °C; printed /-100/ | 7 | ||
| GATE pin low level output current | ISINK | 165 | mA | VDD = 7.5 V, VGATE = VDD, Tj = 25±10 °C | 7 | ||
| GATE pin low level output current | ISINK | 100 | mA | VDD = 7.5 V, VGATE = VDD, Tj = -40~125 °C | 7 | ||
| Consumption current in off-mode | IINsd | 0.9 | mA | VIN = 12.0 V, VLD = VDD, VPWMD = 0 V, Tj = 25±10 °C | 7 | ||
| Consumption current in off-mode | IINsd | 1 | mA | VIN = 12.0 V, VLD = VDD, VPWMD = 0 V, Tj = -40~125 °C | 7 | ||
| Front edge blanking time of current control | tBLANK | 155 | 310 | ns | VIN = 12.0 V, VDD = VDDR, Tj = 25±10 °C | 7 | |
| Front edge blanking time of current control | tBLANK | 150 | 320 | ns | VIN = 12.0 V, VDD = VDDR, Tj = -40~125 °C | 7 | |
| Driver enable minimum time | tON(MIN) | 1000 | ns | VIN = 12.0 V, VDD = VDDR, VCS = 520 mV, Tj = 25±10 °C | 7 | ||
| Driver enable minimum time | tON(MIN) | 1500 | ns | VIN = 12.0 V, VDD = VDDR, VCS = 520 mV, Tj = -40~125 °C | 7 | ||
| Switch-over delay time of GATE output | tDELAY | 150 | ns | VIN = 12.0 V, VDD = VDDR, VCS = 520 mV, Tj = 25±10 °C | 7 | ||
| Switch-over delay time of GATE output | tDELAY | 200 | ns | VIN = 12.0 V, VDD = VDDR, VCS = 520 mV, Tj = -40~125 °C | 7 | ||
| Driver disable time in limit current mode | tHICCUP | 330 | 550 | us | VIN = 12.0 V, VDD = VDDR, VCS = VDD, Tj = 25±10 °C | 7 | |
| Driver disable time in limit current mode | tHICCUP | 250 | 650 | us | VIN = 12.0 V, VDD = VDDR, VCS = VDD, Tj = -40~125 °C | 7 | |
| Driver enable minimum time in absolute maximum current mode | tON(LIM) | 430 | us | VIN = 12.0 V, VDD = VDDR, VCS = VDD, Tj = 25±10 °C | 7 | ||
| Driver enable minimum time in absolute maximum current mode | tON(LIM) | 515 | us | VIN = 12.0 V, VDD = VDDR, VCS = VDD, Tj = -40~125 °C | 7 | ||
| Driver disable time duration | tOFF | 32 | 48 | us | VIN = 12.0 V, VDD = VDDR, ROSC = 1 mOhm, Tj = 25±10 °C | 7 | |
| Driver disable time duration | tOFF | 25 | 55 | us | VIN = 12.0 V, VDD = VDDR, ROSC = 1 mOhm, Tj = -40~125 °C | 7 | |
| Driver disable time duration | tOFF | 8 | 12 | us | VIN = 12.0 V, VDD = VDDR, ROSC = 226 kOhm, Tj = 25±10 °C | 7 | |
| Driver disable time duration | tOFF | 6 | 14 | us | VIN = 12.0 V, VDD = VDDR, ROSC = 226 kOhm, Tj = -40~125 °C | 7 | |
| Input voltage | VIN | -0.5 | 470 | V | 5 | ||
| Voltage applied to pin VDD | VDD | -0.3 | 12.3 | V | 5 | ||
| Voltage at pins PWMD, CS, LD, GATE, RT | -0.3 | V | max printed as VDD + 0.3 | 5 | |||
| Junction temperature | Tj | -40 | 125 | °C | 5 | ||
| Input voltage | VIN | 8 | 450 | V | limited by dissipated power in the package | 5 | |
| Maximum voltage applied to pin VDD | VDDMAX | 12 | V | 5 | |||
| Junction temperature | Tj | -40 | 125 | °C | 5 | ||
| Thermal resistance chip-ambient, SO-8 | Rθja | 148 | °C/W | eight pin SO package | 10 |
CAD (KiCad official)
- Symbol:
IL9961DT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
il9961dt-etched.step/il9961dt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);il9961dt.step/il9961dt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: IKSEMICON datasheet (12 pp, sha256
aa3d721aad780852, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).