component
TS3V330DBQR
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, SSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTS3V330DBQR
Texas Instruments · Analog Switches, Multiplexers · SSOP-16
TS3V330DBQR from Texas Instruments, in a SSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Select input that routes the D port to S1 when low or S2 when high (VIL 0 to 0.8 V, VIH 2 V to VCC). |
| 2 | S1A | bidirectional | Analog video I/O S1 of channel A, connected to DA when EN and IN are low (0 to VCC). |
| 3 | S2A | bidirectional | Analog video I/O S2 of channel A, connected to DA when EN is low and IN is high (0 to VCC). |
| 4 | DA | bidirectional | Analog video I/O D port of channel A, connected to S1A or S2A as selected by IN (0 to VCC). |
| 5 | S1B | bidirectional | Analog video I/O S1 of channel B, connected to DB when EN and IN are low (0 to VCC). |
| 6 | S2B | bidirectional | Analog video I/O S2 of channel B, connected to DB when EN is low and IN is high (0 to VCC). |
| 7 | DB | bidirectional | Analog video I/O D port of channel B, connected to S1B or S2B as selected by IN (0 to VCC). |
| 8 | GND | power_in | Ground. |
| 9 | DC | bidirectional | Analog video I/O D port of channel C, connected to S1C or S2C as selected by IN (0 to VCC). |
| 10 | S2C | bidirectional | Analog video I/O S2 of channel C, connected to DC when EN is low and IN is high (0 to VCC). |
| 11 | S1C | bidirectional | Analog video I/O S1 of channel C, connected to DC when EN and IN are low (0 to VCC). |
| 12 | DD | bidirectional | Analog video I/O D port of channel D, connected to S1D or S2D as selected by IN (0 to VCC). |
| 13 | S2D | bidirectional | Analog video I/O S2 of channel D, connected to DD when EN is low and IN is high (0 to VCC). |
| 14 | S1D | bidirectional | Analog video I/O S1 of channel D, connected to DD when EN and IN are low (0 to VCC). |
| 15 | EN | input | Switch-enable input; low enables the switches, high gives high impedance between D and S ports, and should be tied to VCC through a pullup resistor to ensure high impedance during power up or down. |
| 16 | VCC | power_in | Supply voltage, 3 V to 3.6 V recommended operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TS3V330DBQR - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16 (KiCad packages3D, STEP)
- 3D model files:
ts3v330dbqr-etched.step/ts3v330dbqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts3v330dbqr.step/ts3v330dbqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
02a359e4405a8a39, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).