component
FPB252010D-2R2MT0
Public Made by Adomby adom
cjiang Changjiang Microelectronics Tech Power Inductors, 1008. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFPB252010D-2R2MT0
cjiang Changjiang Microelectronics Tech · Power Inductors · 1008
FPB252010D-2R2MT0 from cjiang Changjiang Microelectronics Tech, in a 1008. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | cjiang Changjiang Microelectronics Tech |
| Package | 1008 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated DC current Isat (Max.[Typ.]) | Isat | 3.1 | 2.8 | A | DC current at which inductance decreases approximately 30% from initial value | 3 | |
| DC resistance Rdc (Max.[Typ.]) | Rdc | 84 | 97 | mΩ | 3 | ||
| Temperature rise current Itemp (Max.[Typ.]) | Itemp | 2.55 | 2.2 | A | DC current at which temperature rises approximately ΔT=40°C (reference value) | 3 | |
| Inductance tolerance (M) | -20 | 20 | % | Tolerance code M: ±20% | 3 | ||
| Inductance temperature coefficient | 1000 | ppm/°C | Measured from -40°C to 125°C; 1000 ppm/°C or less | 6 | |||
| Withstand DC voltage | 20 | V | 3 | ||||
| Operating temperature range | -40 | 125 | °C | Includes self-temperature rise | 7 | ||
| Part temperature (ambient + temp rise) | 125 | °C | Worst case operating conditions; should not exceed 125°C | 7 | |||
| Taping package storage temperature | 5 | 40 | °C | Taping package storage | 7 | ||
| Inductance (nominal) | L | 2.2 | uH | Test frequency 1MHz, OSC level 0.5V | 3 | ||
| Inductance change after adhesive test | ΔL/L | -10 | 10 | % | Adhesive test; change from initial value | 6 | |
| Inductance change after vibration test | ΔL/L | -10 | 10 | % | Vibration, 10-55 Hz, 1.5 mm amplitude, 2 h per axis; change from initial value | 6 | |
| Inductance change after mechanical shock test | ΔL/L | -10 | 10 | % | Peak acceleration 1962 m/s², 6 ms, 3 times per axis; change from initial value | 6 | |
| Inductance change after drop test | ΔL/L | -10 | 10 | % | Dropped from 100 cm, 3 times per axis; change from initial value | 6 | |
| Inductance change after resistance to solder heat | ΔL/L | -10 | 10 | % | Reflow, peak 255(+5/-0)°C, 2 times; change from initial value | 6 | |
| Inductance change after low temperature test | ΔL/L | -10 | 10 | % | -40±3°C, 500±12 h load; change from initial value | 7 | |
| Inductance change after dry heat test | ΔL/L | -10 | 10 | % | +85±2°C, 500±12 h load; change from initial value | 7 | |
| Inductance change after humidity test | ΔL/L | -10 | 10 | % | +40±2°C, 90-95% RH, 500±12 h load; change from initial value | 7 | |
| Inductance change after thermal shock test | ΔL/L | -10 | 10 | % | -40±3°C to +125±2°C, 100 cycles; change from initial value | 7 |
CAD (KiCad official)
- Symbol:
FPB252010D-2R2MT0 - Footprint:
Inductor_SMD:L_1008_2520Metric - 3D model: 1008 (KiCad packages3D, STEP)
- 3D model files:
fpb252010d-2r2mt0-etched.step/fpb252010d-2r2mt0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fpb252010d-2r2mt0.step/fpb252010d-2r2mt0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: cjiang Changjiang Microelectronics Tech datasheet (8 pp, sha256
8f83a2572d196fbd, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).