Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LP2985A-50DBVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

LP2985A-50DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply voltage pin; accepts 2.5 V to 16 V range for new chip with minimum 1 µF input capacitor to ground.
2 GND power_in Ground reference pin for negative supply.
3 ON/OFF input Enable pin for LDO; output regulated when voltage exceeds 0.85 V and disabled when voltage is below 0.72 V for new chip; tie to VIN if unused.
4 BYPASS output Bandgap reference voltage output; connect 10 nF capacitor to ground for low-noise performance achieving 30 µVRMS.
5 VOUT output Regulated 5.0 V output; requires minimum 2.2 µF output capacitor with ESR less than 1 Ω and supplies up to 150 mA output current for new chip.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage tolerance, IL = 1 mA (A grade, legacy) ΔVOUT -1 1 % IL = 1 mA 5
Output voltage tolerance, 1 mA to 50 mA (A grade, legacy) ΔVOUT -1.5 1.5 % 1 mA ≤ IL ≤ 50 mA 5
Output voltage tolerance, 1 mA to 150 mA (A grade, legacy) ΔVOUT -2.5 2.5 % 1 mA ≤ IL ≤ 150 mA 5
Output voltage tolerance, 1 mA to 50 mA over temperature (A grade, legacy) ΔVOUT -2.5 2.5 % 1 mA ≤ IL ≤ 50 mA, –40°C ≤ TJ ≤ 125°C 5
Output voltage tolerance, 1 mA to 150 mA over temperature (A grade, legacy) ΔVOUT -3.5 3.5 % 1 mA ≤ IL ≤ 150 mA, –40°C ≤ TJ ≤ 125°C 5
Line regulation (legacy) ΔVOUT(ΔVIN) 0.007 0.014 %/V VO(NOM) + 1 V ≤ VIN ≤ 16 V 6
Line regulation over temperature (legacy) ΔVOUT(ΔVIN) 0.007 0.032 %/V VO(NOM) + 1 V ≤ VIN ≤ 16 V, –40°C ≤ TJ ≤ 125°C 6
Dropout voltage (legacy) VIN - VOUT 1 3 mV IOUT = 0 mA 6
Dropout voltage over temperature (legacy) VIN - VOUT 5 mV IOUT = 0 mA, –40°C ≤ TJ ≤ 125°C 6
Dropout voltage (legacy) VIN - VOUT 7 10 mV IOUT = 1 mA 6
Dropout voltage over temperature (legacy) VIN - VOUT 15 mV IOUT = 1 mA, –40°C ≤ TJ ≤ 125°C 6
Dropout voltage (legacy) VIN - VOUT 40 60 mV IOUT = 10 mA 6
Dropout voltage over temperature (legacy) VIN - VOUT 90 mV IOUT = 10 mA, –40°C ≤ TJ ≤ 125°C 6
Dropout voltage (legacy) VIN - VOUT 120 150 mV IOUT = 50 mA 6
Dropout voltage over temperature (legacy) VIN - VOUT 225 mV IOUT = 50 mA, –40°C ≤ TJ ≤ 125°C 6
Dropout voltage (legacy) VIN - VOUT 280 350 mV IOUT = 150 mA 6
Dropout voltage over temperature (legacy) VIN - VOUT 575 mV IOUT = 150 mA, –40°C ≤ TJ ≤ 125°C 6
GND pin current (legacy) IGND 65 95 µA IOUT = 0 mA 6
GND pin current over temperature (legacy) IGND 125 µA IOUT = 0 mA, –40°C ≤ TJ ≤ 125°C 6
GND pin current (legacy) IGND 75 110 µA IOUT = 1 mA 6
GND pin current over temperature (legacy) IGND 170 µA IOUT = 1 mA, –40°C ≤ TJ ≤ 125°C 6
GND pin current (legacy) IGND 120 220 µA IOUT = 10 mA 6
GND pin current over temperature (legacy) IGND 400 µA IOUT = 10 mA, –40°C ≤ TJ ≤ 125°C 6
GND pin current (legacy) IGND 350 600 µA IOUT = 50 mA 6
GND pin current over temperature (legacy) IGND 900 µA IOUT = 50 mA, –40°C ≤ TJ ≤ 125°C 6
GND pin current (legacy) IGND 850 1200 µA IOUT = 150 mA 6
GND pin current over temperature (legacy) IGND 2000 µA IOUT = 150 mA, –40°C ≤ TJ ≤ 125°C 7
GND pin current in shutdown (legacy) IGND 0.01 0.08 µA VON/OFF < 0.3 V, VIN = 16 V 7
GND pin current in shutdown, –40°C to 85°C (legacy) IGND 0 1 µA VON/OFF < 0.15 V, VIN = 16 V, –40°C ≤ TJ ≤ 85°C 7
GND pin current in shutdown, –40°C to 125°C (legacy) IGND 0.01 2 µA VON/OFF < 0.15 V, VIN = 16 V, –40°C ≤ TJ ≤ 125°C 7
ON/OFF input voltage, output OFF (legacy) VON/OFF 0.55 V Low = Output OFF 7
ON/OFF input voltage, output OFF over temperature (legacy) VON/OFF 0.15 V Low = Output OFF, VOUT + 1 ≤ VIN ≤ 16 V, –40°C ≤ TJ ≤ 125°C 7
ON/OFF input voltage, output ON (legacy) VON/OFF 1.4 V High = Output ON 7
ON/OFF input voltage, output ON over temperature (legacy) VON/OFF 1.6 V High = Output ON, VOUT + 1 ≤ VIN ≤ 16 V, –40°C ≤ TJ ≤ 125°C 7
ON/OFF input current over temperature (legacy) ION/OFF -1 µA VON/OFF = 0 V, VOUT + 1 ≤ VIN ≤ 16 V, –40°C ≤ TJ ≤ 125°C 7
Continuous input voltage range (legacy chip) VIN -0.3 16 V 4
Output voltage range (legacy chip) VOUT -0.3 9 V 4
ON/OFF pin voltage range (legacy chip) VON/OFF -0.3 16 V 4
Operating junction temperature TJ -55 150 °C 4
Storage temperature Tstg -65 150 °C 4
Electrostatic discharge, human body model (legacy chip) V(ESD) -2000 2000 V HBM, per ANSI/ESDA/JEDEC JS-001 4
Electrostatic discharge, charged device model (legacy chip) V(ESD) -500 500 V CDM, per JEDEC JESD22-C101 4
Supply input voltage (legacy chip) VIN 2.2 16 V legacy chip 4
Output voltage (legacy chip) VOUT 1.2 10 V legacy chip 4
Enable voltage (legacy chip) VON/OFF 0 V legacy chip; maximum printed as VIN 4
Output current IOUT 0 150 mA 4
Output capacitance (legacy chip) COUT 2.2 4.7 µF legacy chip 4
Operating junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance (legacy chip, DBV) RθJA 205.4 °C/W legacy chip, DBV (SOT23-5), JEDEC 2s2p PCB 5
Junction-to-case (top) thermal resistance (legacy chip, DBV) RθJC(top) 78.8 °C/W legacy chip, DBV (SOT23-5) 5
Junction-to-board thermal resistance (legacy chip, DBV) RθJB 46.7 °C/W legacy chip, DBV (SOT23-5) 5
Junction-to-top characterization parameter (legacy chip, DBV) ψJT 8.3 °C/W legacy chip, DBV (SOT23-5) 5
Junction-to-board characterization parameter (legacy chip, DBV) ψJB 46.3 °C/W legacy chip, DBV (SOT23-5) 5

CAD (KiCad official)

  • Symbol: LP2985A-50DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lp2985a-50dbvr-etched.step / lp2985a-50dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2985a-50dbvr.step / lp2985a-50dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 662ea8a50cc4c2be, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF