Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLE493DP3B6A0HTSA1

Infineon Technologies · IC · TSOP-6

TLE493DP3B6A0HTSA1 from Infineon Technologies, in a TSOP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCL (INTN) input Interface serial clock pin (input) for the I2C bus; it also carries the interrupt output INTN, which is open-drain and signals a finished measurement cycle.
2 GND power_in Must be connected externally to GND pin 3.
3 GND power_in Ground pin.
4 VDD power_in Supply pin; the operating supply voltage range is 2.8 V to 5.5 V.
5 GND power_in Must be connected externally to GND pin 3.
6 SDA bidirectional Interface serial data pin (input/output) of the I2C bus, open-drain.

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package TSOP-6
Category
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Junction temperature Tj -40 150 °C 7
Voltage on any pin to GND Vmax -0.3 6 V 7
Magnetic field Bmax -1 1 T 7
ESD robustness (HBM) VESD-HBM -4 4 kV Ta = 25°C; For all pins 7
ESD robustness (CDM) VESD-CDM -0.5 0.5 kV Ta = 25°C; For all pins 7
Operating temperature Tj -40 125 °C 7
Operating supply voltage VDD 2.8 5.5 V 7
Register reset level Vres 1 2.3 V 7
Register reset level hysteresis Vres-hys 25 50 mV 7
ADC restart level VADCr 2.3 2.6 2.8 V min. ADC operating level 7
ADC restart hysteresis VADCr-hys 25 50 mV 7
Magnetic range (full range) BXYZ -160 160 mT 8
Magnetic range (short range) BXYZ_SR -100 100 mT 8
Magnetic range (extra short range) BXYZ_XSR -50 50 mT 8
Supply current Power Down IDD_pd 500 1000 nA Tj = 25°C; supply current at VDD pin in power down; no communication and no floating pins at the interface 8
Supply current Power Down @85°C IDD_pd 6 μA Tj = 85°C; supply current at VDD pin in power down; no communication and no floating pins at the interface 8
Supply current active IDD_active 4.2 6 mA Supply current at VDD pin while ADC active 8
Supply current at power up IDD_pu 8.5 mA Supply current at VDD pin during power up 8
Input voltage low threshold VIL 30 % VDD all input pads 8
Input voltage high threshold VIH 70 % VDD all input pads 8
Input voltage hysteresis VIHYS 5 % VDD all input pads 8
Output voltage low level VOL 0.4 V all output pads, static load, IOL = 5 mA 8
IO pin leakage current Ileakage_IO -1 1 μA 0 V ≤ VIO ≤ VDD 8
SDA, SCL(INTN) pin capacitance CSDA, CSCL 10 pF 8
Sensitivity X, Y, Z (full range) SX, SY, SZ 23 29.5 38 LSB14/mT 11
Sensitivity X, Y, Z (short range) SX_SR, SY_SR, SZ_SR 46 59 76 LSB14/mT 11
Sensitivity X, Y, Z (extra short range) SX_XSR, SY_XSR, SZ_XSR 92 118 152 LSB14/mT 11
Offset X, Y, Z (all ranges) OX, OY, OZ -0.5 0.2 0.5 mT BPh = 0 mT 11
X to Y magnetic matching (all ranges) MXY -5 1 5 % 11
X/Y to Z magnetic matching (all ranges) MX/YZ -15 5 15 % 11
Sensitivity drift X, Y, Z SX_D_comp, SY_D_comp, SZ_D_comp -9 9 % Tj = -40...85°C 11
Sensitivity drift X, Y, Z SX_D_comp, SY_D_comp, SZ_D_comp -10 5 10 % Tj = -40...105°C 11
Sensitivity drift X, Y, Z SX_D_comp, SY_D_comp, SZ_D_comp -10.5 10.5 % Tj = -40...125°C 11
Offset drift X, Y, Z OX_D_comp, OY_D_comp, OZ_D_comp -0.3 0.3 mT Tj = -40...85°C, BPh = 0 mT 11
X to Y magnetic matching drift MXY_D_comp -1.65 1.65 % Tj = -40...85°C 11
X to Y magnetic matching drift MXY_D_comp -1.7 1.7 % Tj = -40...105°C 11
X to Y magnetic matching drift MXY_D_comp -1.9 1.9 % Tj = -40...125°C 11
X/Y to Z magnetic matching drift MX/YZ_D_comp -6.5 6.5 % Tj = -40...85°C 11
X/Y to Z magnetic matching drift MX/YZ_D_comp -6.75 6.75 % Tj = -40...105°C 11
X/Y to Z magnetic matching drift MX/YZ_D_comp -8 8 % Tj = -40...125°C 11
Sensitivity drift X, Y, Z (raw) SX_D, SY_D, SZ_D -12.7 12.7 % 12
Offset drift X, Y, Z (raw) OX_D, OY_D, OZ_D -0.35 0.35 mT BPh = 0 mT 12
X to Y magnetic matching drift (raw) MXY_D -1.7 1.7 % 12
X/Y to Z magnetic matching drift (raw) MX/YZ_D -7.5 7.5 % 12
Integral non linearity (full range) INL -40 40 LSB14 Bx, By and Bz 12
Integral non linearity (short range) INLSR -80 80 LSB14 Bx, By and Bz 12
Integral non linearity (extra short range) INLXSR -160 160 LSB14 Bx, By and Bz 12
Differential non linearity (full range) DNL -16 16 LSB14 Bx, By and Bz 12
Differential non linearity (short range) DNLSR -32 32 LSB14 Bx, By and Bz 12
Differential non linearity (extra short range) DNLXSR -64 64 LSB14 Bx, By and Bz 12
Z-magnetic noise (full range, rms) BNeffZ 173 μT rms rms = 1 sigma 12
XY-magnetic noise (full range, rms) BNeffXY 250 μT rms rms = 1 sigma 12
Z-magnetic noise (short range, rms) BNeffZ_SR 122 μT rms rms = 1 sigma 12
XY-magnetic noise (short range, rms) BNeffXY_SR 176 μT rms rms = 1 sigma 12
Z-magnetic noise (extra short range, rms) BNeffZ_XSR 86 μT rms rms = 1 sigma 12
XY-magnetic noise (extra short range, rms) BNeffXY_XSR 125 μT rms rms = 1 sigma 12
Temperature sensitivity STemp 13.3 15.2 17.2 LSB14/K referring to Tj 13
Temp reference value Tempref 3880 4200 4500 LSB14 TempPh = TempPh_ref 13

CAD (KiCad official)

  • Symbol: TLE493DP3B6A0HTSA1
  • Footprint: Package_SO:TSOP-6_1.65x3.05mm_P0.95mm
  • 3D model: TSOP-6 (KiCad packages3D, STEP)
  • 3D model files: tle493dp3b6a0htsa1-etched.step / tle493dp3b6a0htsa1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tle493dp3b6a0htsa1.step / tle493dp3b6a0htsa1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (51 pp, sha256 e438e69e8ea79e12, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF