3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownS-1206B30-M3T1U
ABLIC · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3
S-1206B30-M3T1U from ABLIC, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin. Operating input range 1.7 V to 6.5 V. For 3.0 V output the recommended Vin ≥ 4.0 V to source the full 250 mA. A ceramic input capacitor of 0.1 µF or greater is recommended. |
| 2 | VSS | power_in | Ground (GND) reference pin for the regulator. |
| 3 | VOUT | power_out | Regulated output voltage pin. Fixed 3.0 V ±1.0% for the -B30 variant, capable of sourcing up to 250 mA (with adequate Vin headroom). A ceramic output capacitor of 0.1 µF or greater is recommended; built-in overcurrent protection limits the pass transistor current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABLIC |
| Package | SOT-23-3 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
S-1206B30-M3T1US-1206B30-M3T1GS-1206B30-M3T1UU3T1US-1206B30-M3T1UU3T1GS-1206B30-M3T1UI6T2U
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output current (VIN ≥ VOUT(S) + 1.0 V, 1.5 V ≤ VOUT(S)) | IOUT | 250 | mA | VIN ≥ VOUT(S) + 1.0 V, 1.5 V ≤ VOUT(S) | 7 | ||
| Output voltage temperature coefficient | -120 | 120 | ppm/°C | VIN = VOUT(S) + 1.0 V, IOUT = 30 mA, −40°C ≤ Ta ≤ 85°C | 7 | ||
| Input voltage | VIN | 1.7 | 6.5 | V | 7 | ||
| Line regulation | 0.05 | 0.2 | %/V | VOUT(S) + 0.5 V ≤ VIN ≤ 6.5 V, IOUT = 1 μA | 7 | ||
| Load regulation | ΔVOUT2 | 20 | 40 | mV | VIN = VOUT(S) + 1.0 V, 1 μA ≤ IOUT ≤ 100 mA | 7 | |
| Dropout voltage (3.0 V ≤ VOUT(S) ≤ 5.2 V) | Vdrop | 0.15 | 0.23 | V | IOUT = 100 mA | 7 | |
| Current consumption during operation | ISS1 | 1 | 1.5 | μA | VIN = VOUT(S) + 1.0 V, no load | 7 | |
| Short-circuit current (2.3 V ≤ VOUT ≤ 5.2 V) | ISHORT | 100 | mA | VIN = VOUT(S) + 1.0 V, VOUT = 0 V | 7 | ||
| Operation ambient temperature | Topr | -40 | 85 | °C | 6 | ||
| Storage temperature | Tstg | -40 | 125 | °C | 6 | ||
| Power dissipation (SOT-23-3) | PD | 430 | mW | When mounted on board | 6 |
CAD (KiCad official)
- Symbol:
S-1206B30-M3T1U - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
s-1206b30-m3t1u-etched.step/s-1206b30-m3t1u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s-1206b30-m3t1u.step/s-1206b30-m3t1u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ABLIC datasheet (35 pp, sha256
9366b0a6573d9b1f, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).