Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REF3425SQDBVRQ1

Texas Instruments · Voltage References · SOT-23-5

REF3425SQDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 NC unconnected Test pin that the datasheet says to connect from 0 V to 18 V, so it is not a true no-connect.
2 GND power_in Ground connection for the device.
3 IN power_in Power input supply voltage connection; recommended IN is VOUT + VDO to 12 V and the absolute maximum is 13 V.
4 OUT output Reference voltage output connection; output current is specified at ±10 mA and output short-circuit current is limited to 20 mA.
5 NIC unconnected No internal connection.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy -0.05 0.05 % TA = 25℃ 5
Output voltage temperature coefficient 2.5 6 ppm/℃ 5
Line regulation ΔVO/ΔVIN 2 15 ppm/V VIN = VOUT + VDO (2) to 12 V 5
Load regulation, sourcing ΔVO/ΔIL 20 30 ppm/mA IL = 0 mA to 10mA, VIN = VOUT+ VDO (3), sourcing 5
Load regulation, sinking (REF3425-Q1) ΔVO/ΔIL 40 70 ppm/mA IL = 0 mA to -10mA, VIN = VOUT+ VDO (3), sinking, REF3425-Q1 5
Long-term stability, DBV package, 0 to 1000 h at 35℃ 25 ppm 0 to 1000h at 35℃ 5
Long-term stability, DBV package, 1000 h to 2000 h at 35℃ 10 ppm 1000h to 2000h at 35℃ 5
Output voltage thermal hysteresis, DBV package, cycle 1 30 ppm 25°C, -40°C, 125°C, 25°C Cycle 1 5
Output voltage thermal hysteresis, DBV package, cycle 2 10 ppm 25°C, -40°C, 125°C, 25°C Cycle 2 5
Low frequency noise (REF3425-Q1) enp-p 5 µV p-p/V 0.1Hz ≤ f ≤ 10Hz 5
Integrated wide band noise en 24 µVrms 10Hz ≤ f ≤ 10kHz 5
Output voltage noise density en 0.25 ppm/√Hz f = 1kHz 5
Turn-on time tON 2.5 ms 0.1% of output voltage settling, CL = 10 µF, REF3425-Q1 5
Stable output capacitor range CL 0.1 10 µF 5
Output voltage VOUT 2.5 V REF3425Q1 6
Input voltage VIN 12 V 6
Output current capacity IL -10 10 mA VIN = VOUT + VDO to 12 V 6
Quiescent current, active mode IQ 72 95 µA Active mode 6
Dropout voltage at IL = 0 mA VDO 50 100 mV IL = 0 mA 6
Dropout voltage at IL = 10 mA VDO 500 mV IL = 10 mA 6
Short circuit current ISC 18 22 mA VOUT = 0 V at TA = 25°C 6
Input voltage (absolute maximum) IN -0.3 13 V 4
Output voltage (absolute maximum) VOUT -0.3 5.5 V 4
Output short circuit current (absolute maximum) 20 mA 4
Operating temperature range, TA (absolute maximum) TA -55 150 °C 4
Storage temperature range (absolute maximum) Tstg -65 170 °C 4
Input voltage (recommended) IN 12 V 4
Output current (recommended) IL -10 10 mA 4
Operating temperature (recommended) TA -40 25 125 °C 4
Junction-to-ambient thermal resistance, DBV 5-pin RθJA 122.6 °C/W 4
Junction-to-case (top) thermal resistance, DBV 5-pin RθJC(top) 80.2 °C/W 4
Junction-to-board thermal resistance, DBV 5-pin RθJB 42 °C/W 4
Junction-to-top characterization parameter, DBV 5-pin ΨJT 23.2 °C/W 4
Junction-to-board characterization parameter, DBV 5-pin ΨJB 41.9 °C/W 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: REF3425SQDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ref3425sqdbvrq1-etched.step / ref3425sqdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref3425sqdbvrq1.step / ref3425sqdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 c10928a43c33c6bc, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF