component
ICPL-M601-510EAXW
Public Made by Adomby adom
ISOMICRON Logic Output Optoisolators, SOP-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownICPL-M601-510EAXW
ISOMICRON · Logic Output Optoisolators · SOP-5
ICPL-M601-510EAXW from ISOMICRON, in a SOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | passive | Anode of the AlGaAs infrared input LED, rated for 25 mA forward current (50 mA peak, 50% duty, 1 ms) and 5 V reverse voltage. |
| 3 | Cathode | passive | Cathode of the AlGaAs infrared input LED, with the 5 V reverse voltage limit applying across the input diode. |
| 4 | GND | power_in | Ground reference for the photo-detector logic gate output stage and supply. |
| 5 | VO | output | Logic gate output, rated at 7 V maximum output voltage and 50 mA maximum output current, used with an external pull-up resistor of 330 Ω to 4 kΩ. |
| 6 | VCC | power_in | Supply pin; recommended supply is 2.7 V to 3.6 V or 4.5 V to 5.5 V, with an absolute maximum of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISOMICRON |
| Package | SOP-5 |
| Category | Optoisolators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward Current | IF | 25 | mA | 3 | |||
| Peak Forward Current | IFP | 50 | mA | 50% duty, 1ms P.W | 3 | ||
| Peak Transient Current | IF(trans) | 1 | A | ≤1μs P.W, 300pps | 3 | ||
| Reverse Voltage | VR | 5 | V | 3 | |||
| Input Power Dissipation | PI | 100 | mW | 3 | |||
| Supply Voltage | VCC | 7 | V | 3 | |||
| Output Voltage | VO | 7 | V | 3 | |||
| Output Current | IO | 50 | mA | 3 | |||
| Output Power Dissipation | PO | 85 | mW | 3 | |||
| Total Power Dissipation | Ptot | 200 | mW | 3 | |||
| Isolation Voltage | Viso | 3750 | Vrms | AC for 1 minute, R.H. = 40~60% | 3 | ||
| Operating Temperature | Topr | -40 | 100 | °C | 3 | ||
| Storage Temperature | Tstg | -55 | 125 | °C | 3 | ||
| Soldering Temperature | Tsol | 260 | °C | For 10 seconds | 3 | ||
| Operating Temperature | Ta | -40 | 100 | °C | 4 | ||
| Supply Voltage | VCC | 2.7 | 3.6 | V | 4 | ||
| Supply Voltage | VCC | 4.5 | 5.5 | V | 4 | ||
| Low Level Input Current | IFL | 0 | 250 | μA | 4 | ||
| High Level Input Current | IFH | 5 | 15 | mA | 4 | ||
| Low Level Enable Voltage | VEL | 0 | 0.8 | V | 4 | ||
| High Level Enable Voltage | VEH | 2 | V | 4 | |||
| Output Pull-up Resistor | RL | 330 | Ω | 4 | |||
| Fan Out | N | 5 | TTL Loads | at RL=1kΩ per channel | 4 | ||
| Propagation Delay Time to Output Low Level | tPHL | 35 | 75 | ns | CL=15pF, RL=350Ω, Ta=25°C | 4 | |
| Propagation Delay Time to Output High Level | tPLH | 40 | 75 | ns | CL=15pF, RL=350Ω, Ta=25°C | 4 | |
| Pulse Width Distortion | /tPHL-tPLH/ | 5 | 35 | ns | CL=15pF, RL=350Ω | 4 | |
| Common Mode Transient Immunity at Logic High | CMH | 10000 | V/μs | IF = 7.5mA, VOH=2.0V, RL=350Ω, Ta=25°C, VCM=400Vp-p | 4 | ||
| Common Mode Transient Immunity at Logic Low | CML | 10000 | V/μs | IF = 0mA, VOH=0.8V, RL=350Ω, Ta=25°C, VCM=400Vp-p | 4 | ||
| Forward Voltage | VF | 1.38 | 1.8 | V | IF=10mA | 5 | |
| Reverse Current | IR | 10 | μA | VR=5V | 5 | ||
| High Level Supply Current | ICCH | 6.3 | 10 | mA | IF=0mA, VE=0.5V, VCC=5.5V | 5 | |
| Low Level Supply Current | ICCL | 8.3 | 13 | mA | IF=10mA, VCC=5.5V | 5 | |
| High Level Output Current | IOH | 0.73 | 100 | μA | VCC=5.5V, VO=5.5V, IF=250μA, VE=2.0V | 5 | |
| Low Level Output Voltage | VOL | 0.28 | 0.6 | V | VCC=5.5V, IF=5mA, VE=2.0V, ICL=13mA | 5 | |
| Input Threshold Current | IFT | 2.5 | 5 | mA | VCC=5.5V, VO=0.6V, VE=2.0V, IOL=13mA | 5 |
CAD (KiCad official)
- Symbol:
ICPL-M601-510EAXW - Footprint:
Package_SO:SOIC-5-6_4.4x3.6mm_P1.27mm - 3D model: SOP-5 (KiCad packages3D, STEP)
- 3D model files:
icpl-m601-510eaxw-etched.step/icpl-m601-510eaxw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);icpl-m601-510eaxw.step/icpl-m601-510eaxw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISOMICRON datasheet (17 pp, sha256
171596df53ae9154, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).