Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LD1117AG-50-AB3-A-R

UTC Unisonic Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89

LD1117AG-50-AB3-A-R from UTC Unisonic Tech, in a SOT-89. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for the regulator. On this fixed 5.0V (voltage code 50) variant the GND/ADJ pin is tied to system ground; the internal reference sets VOUT = 5.0V above this node.
2 VOUT power_out Regulated 5.0V output, capable of sourcing up to 1 A (LD1117A variant). Requires an output capacitor (MLCC supported) for stability; typical output tolerance is ±2%.
3 VIN power_in Unregulated positive input supply. Recommended operating VIN up to 15V (absolute max 18V). For a 5.0V output the dropout voltage is typically 1.2V at 1A, so VIN must exceed ~6.2V under full load.

Key specifications

Parameter Value
Manufacturer UTC Unisonic Tech
Package SOT-89
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • LD1117AG-50-AB3-A-R
  • LD1117AG-50-AB3-A-RAA3
  • LD1117AG-50-AB3-A-RTA3
  • LD1117AG-50-AB3-A-RTF3
  • LD1117AG-50-AB3-A-RTN3
  • LD1117AG-50-AB3-A-RTND
  • LD1117AG-50-AB3-A-RT2Q
  • LD1117AG-50-AB3-A-RTQ2
  • LD1117AG-50-AB3-A-RTQ3
  • LD1117AG-50-AB3-A-RS08

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 4.9 5 5.1 V VIN=7V, IOUT=10mA, TJ=25°C 9
Line Regulation VOUT 1 10 mV VIN=6.5 to 15V, IOUT=0mA 9
Load Regulation VOUT 1 15 mV VIN=6.5V; LD1117A: IOUT=0~1000mA 9
Supply Voltage Rejection SVR 60 75 dB IOUT=40mA, f=120Hz, TJ=25°C, VIN=8V, VRIPPLE=1VPP 9
Dropout Voltage VD 1 1.1 V IOUT=100mA 9
Dropout Voltage VD 1.15 1.25 V IOUT=500mA 9
Dropout Voltage VD 1.2 1.3 V IOUT=800mA 9
Thermal Regulation 0.01 0.1 %/W TA=25°C, 30ms Pulse 9
Quiescent Current IQ 5 10 mA VIN15V 9
DC Input Voltage VIN 18 V 4
Junction Temperature TJ 150 °C 4
Operating Temperature TOPR -20 125 °C Note 2: determined from design only, not 100% tested 4
Storage Temperature TSTG -65 150 °C 4
Input Voltage VIN 15 V 4
Operating Junction Temperature TJ -20 125 °C 4
Junction to Ambient (SOT-89) θJA 180 °C/W SOT-89 4
Junction to Case (SOT-89) θJC 50 °C/W SOT-89 4
Temperature stability VOUT 0.5 % 9
Long Term Stability VOUT 0.3 % 1000 hrs, TJ=125°C 9
Operating Input Voltage VIN 15 V IOUT=100mA 9
Current Limit ILIMIT 1000 mA LD1117A: VIN=10V, TJ=25°C 9
Output Noise Voltage eN 100 V B=10Hz to 10KHz, TJ=25°C 9

CAD (KiCad official)

  • Symbol: LD1117AG-50-AB3-A-R
  • Footprint: Package_TO_SOT_SMD:SOT-89-3
  • 3D model: SOT-89 (KiCad packages3D, STEP)
  • 3D model files: ld1117ag-50-ab3-a-r-etched.step / ld1117ag-50-ab3-a-r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ld1117ag-50-ab3-a-r.step / ld1117ag-50-ab3-a-r.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ld1117ag-50-ab3-a-r.step 57 KB You want the bare part, or you mark your own boards.
ld1117ag-50-ab3-a-r-etched.step 1.9 MB You want the part with LD1117AG-50-AB3-A-R already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 514 faces against 42 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UTC Unisonic Tech datasheet (15 pp, sha256 f7f26a117cb07dc2, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF