Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F873-04I/SO

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC16F873-04I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Master Clear (Reset) input or programming voltage input; an active low RESET to the device.
2 RA0/AN0 bidirectional RA0 is a bi-directional I/O (TTL) that can also be analog input0.
3 RA1/AN1 bidirectional RA1 is a bi-directional I/O (TTL) that can also be analog input1.
4 RA2/AN2/VREF- bidirectional RA2 is a bi-directional I/O (TTL) that can also be analog input2 or negative analog reference voltage.
5 RA3/AN3/VREF+ bidirectional RA3 is a bi-directional I/O (TTL) that can also be analog input3 or positive analog reference voltage.
6 RA4/T0CKI bidirectional RA4 is a Schmitt Trigger I/O that can also be the clock input to the Timer0 module; its output is open drain type.
7 RA5/SS/AN4 bidirectional RA5 is a bi-directional I/O (TTL) that can also be analog input4 or the slave select for the synchronous serial port.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKIN input Oscillator crystal input or external clock source input (ST/CMOS buffer).
10 OSC2/CLKOUT output Oscillator crystal output connecting to crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1.
11 RC0/T1OSO/T1CKI bidirectional RC0 is a Schmitt Trigger I/O that can also be the Timer1 oscillator output or Timer1 clock input.
12 RC1/T1OSI/CCP2 bidirectional RC1 is a Schmitt Trigger I/O that can also be the Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output.
13 RC2/CCP1 bidirectional RC2 is a Schmitt Trigger I/O that can also be the Capture1 input/Compare1 output/PWM1 output.
14 RC3/SCK/SCL bidirectional RC3 is a Schmitt Trigger I/O that can also be the synchronous serial clock input/output for both SPI and I2C modes.
15 RC4/SDI/SDA bidirectional RC4 is a Schmitt Trigger I/O that can also be the SPI Data In (SPI mode) or data I/O (I2C mode).
16 RC5/SDO bidirectional RC5 is a Schmitt Trigger I/O that can also be the SPI Data Out (SPI mode).
17 RC6/TX/CK bidirectional RC6 is a Schmitt Trigger I/O that can also be the USART Asynchronous Transmit or Synchronous Clock.
18 RC7/RX/DT bidirectional RC7 is a Schmitt Trigger I/O that can also be the USART Asynchronous Receive or Synchronous Data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT bidirectional RB0 is a TTL/Schmitt Trigger I/O that can also be the external interrupt pin; PORTB can be software programmed for internal weak pull-up on all inputs.
22 RB1 bidirectional RB1 is a bi-directional TTL I/O of PORTB, which can be software programmed for internal weak pull-up on all inputs.
23 RB2 bidirectional RB2 is a bi-directional TTL I/O of PORTB, which can be software programmed for internal weak pull-up on all inputs.
24 RB3/PGM bidirectional RB3 is a bi-directional TTL I/O that can also be the low voltage programming input.
25 RB4 bidirectional RB4 is a bi-directional TTL I/O with interrupt-on-change pin function.
26 RB5 bidirectional RB5 is a bi-directional TTL I/O with interrupt-on-change pin function.
27 RB6/PGC bidirectional RB6 is a TTL/Schmitt Trigger I/O that can be the interrupt-on-change pin or In-Circuit Debugger pin, and serves as serial programming clock.
28 RB7/PGD bidirectional RB7 is a TTL/Schmitt Trigger I/O that can be the interrupt-on-change pin or In-Circuit Debugger pin, and serves as serial programming data.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Supply Voltage VDD 4 5.5 V LP, XT, RC osc configuration 152
VDD Supply Voltage (HS osc) VDD 4.5 5.5 V HS osc configuration 152
Brown-out Reset Voltage VBOR 3.7 4 4.35 V BODEN bit in configuration word enabled 152
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See section on Power-on Reset for details 152
Supply Current (RC osc) IDD 1.6 4 mA RC osc configurations FOSC = 4 MHz, VDD = 5.5V 153
Brown-out Reset Current IBOR 85 200 uA BOR enabled, VDD = 5.0V 153
Power-down Current (WDT enabled) IPD 10.5 42 uA VDD = 4.0V, WDT enabled, -40C to +85C 154
Power-down Current (WDT enabled) IPD 1.5 16 uA VDD = 4.0V, WDT enabled, -40C to +85C 154
Power-down Current (WDT enabled, D021A) IPD 1.5 19 uA VDD = 4.0V, WDT enabled, -40C to +85C 154
Brown-out Reset Current IBOR 85 200 uA BOR enabled, VDD = 5.0V 154
Input Low Voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V <= VDD <= 5.5V 155
Input High Voltage, I/O ports with TTL buffer VIH 2 V 4.5V <= VDD <= 5.5V 155
Input Leakage Current, I/O ports IIL 1 uA Vss VPIN VDD, Pin at hi-impedance 155
Input Leakage Current, MCLR, RA4/T0CKI IIL 5 uA Vss VPIN VDD 155
Input Leakage Current, OSC1 IIL 5 uA Vss VPIN VDD, XT, HS and LP osc configuration 155
PORTB Weak Pull-up Current IPURB 50 250 400 uA VDD = 5V, VPIN = VSS, -40C to +85C 155
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40C to +85C 156
Output Low Voltage, OSC2/CLKOUT (RC osc config) VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40C to +85C 156
Open-Drain High Voltage, RA4 pin VOD 8.5 V RA4 pin 156
Capacitive Loading, OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 156
Capacitive Loading, All I/O pins and OSC2 (RC mode) CIO 50 pF All I/O pins and OSC2 (RC mode) 156
Capacitive Loading, SCL, SDA (I2C mode) CB 400 pF SCL, SDA (I2C mode) 156
Data EEPROM Erase/write cycle time TDEW 4 8 ms 156
Program FLASH Endurance EP 1000 E/W 25C at 5V 156
VDD for read (program FLASH) VPR 5.5 V VMIN = min operating voltage 156
VDD for read/write (data EEPROM) VDRW 5.5 V Using EECON to read/write VMIN = min. operating voltage 156
VDD for erase/write (program FLASH) VDD 5.5 V Using EECON to read/write, VMIN = min. operating voltage 156
Erase/Write cycle time (program FLASH) TPEW 4 8 ms 156
Ambient temperature under bias -55 125 C 149
Storage temperature -65 150 C 149
Voltage on VDD with respect to VSS VDD -0.3 7.5 V 149
Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) -0.3 V 149
Voltage on MCLR with respect to VSS 0 14 V 149
Voltage on RA4 with respect to VSS 0 8.5 V 149
Total power dissipation 1 W 149
Input clamp current IIK 20 mA VI < 0 or VI > VDD 149
Output clamp current IOK 20 mA VO < 0 or VO > VDD 149
External CLKIN Frequency (XT and RC) FOSC 4 MHz XT and RC osc mode 162
External CLKIN Frequency (HS, -04) FOSC 4 MHz HS osc mode (-04) 162
External CLKIN Frequency (LP) FOSC 200 kHz LP osc mode 162
Oscillator Frequency (XT) FOSC 0.1 4 MHz XT osc mode 162
Oscillator Frequency (RC) FOSC 4 MHz RC osc mode 162
Oscillator Frequency (LP) FOSC 5 200 kHz LP osc mode 162
Instruction Cycle Time TCY 200 ns TCY = 4/FOSC 162
External CLKIN Period (XT and RC) TOSC 250 ns XT and RC osc mode 162
External CLKIN Period (HS, -04) TOSC 250 ns HS osc mode (-04) 162

CAD (KiCad official)

  • Symbol: PIC16F873-04I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f873-04i-etched.step / pic16f873-04i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f873-04i.step / pic16f873-04i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (218 pp, sha256 2b2f4f67afe6ac63, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F873-04I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F873-04I/SP