Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74AUP1G97DCKR

Texas Instruments · Logic Gates · SC-70-6

SN74AUP1G97DCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 B input Configurable logic input (one of the 3-bit A/B/C pattern that sets the output function per the Function Table); has Schmitt-trigger characteristics, is 3.6-V I/O tolerant, and must be tied to VCC or GND if unused.
2 GND power_in Ground/common supply return pin for the device.
3 C input Configurable logic input (one of the 3-bit A/B/C pattern that sets the output function per the Function Table); has Schmitt-trigger characteristics, is 3.6-V I/O tolerant, and must be tied to VCC or GND if unused.
4 Y output Gate output whose state is determined by the 3-bit pattern on A, B, C; supports Ioff for partial-power-down operation and sources/sinks the IOH/IOL current listed for the selected VCC.
5 VCC power_in Supply voltage pin; recommended operating range 0.8 V to 3.6 V (absolute maximum -0.5 V to 4.6 V).
6 A input Configurable logic input (one of the 3-bit A/B/C pattern that sets the output function per the Function Table); has Schmitt-trigger characteristics, is 3.6-V I/O tolerant, and must be tied to VCC or GND if unused.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Logic
Pins 6

CAD (KiCad official)

  • Symbol: SN74AUP1G97DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: sn74aup1g97dckr-etched.step / sn74aup1g97dckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74aup1g97dckr.step / sn74aup1g97dckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 e574f923d723d017, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF