Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM1086CT-5.0

Texas Instruments · Linear Voltage Regulators (LDO) · TO-220

LM1086CT-5.0 from Texas Instruments, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJ/GND power_in Ground pin for the fixed output voltage versions; for the -5.0 fixed version this pin serves as ground, while the adjust function applies only to the adjustable version.
2 VOUT power_out Output voltage pin for the regulator, and the metal tab is also tied to this output.
3 VIN power_in Input voltage pin for the regulator, with a maximum input-to-output differential of 25 V for the LM1086-5.0 per the absolute maximum ratings.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-220
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Maximum Input to Output Voltage Differential (LM1086-5.0) 25 V 4
Storage temperature Tstg -65 150 °C 4
Junction Temperature TJ 150 °C 4
Junction temperature range, C grade, Control Section TJ 0 125 °C C grade, Control Section 4
Junction temperature range, C grade, Output Section TJ 0 150 °C C grade, Output Section 4
Output Voltage (LM1086-5.0) VOUT 4.95 5 5.05 V TJ = 25°C, IOUT = 0 mA, VIN = 8 V, 0 ≤ IOUT ≤ IFULL LOAD, 6.5 V ≤ VIN ≤ 20 V 5
Output Voltage (LM1086-5.0) over TJ range VOUT 4.9 5 5.1 V TJ over the entire range for operation, IOUT = 0 mA, VIN = 8 V, 0 ≤ IOUT ≤ IFULL LOAD, 6.5 V ≤ VIN ≤ 20 V 5
Line Regulation (LM1086-5.0) ΔVOUT 0.5 10 mV TJ = 25°C, IOUT = 0 mA, 6.5 V ≤ VIN ≤ 20 V 5
Line Regulation (LM1086-5.0) over TJ range ΔVOUT 1 10 mV TJ over the entire range for operation, IOUT = 0 mA, 6.5 V ≤ VIN ≤ 20 V 5
Load Regulation (LM1086-5.0) ΔVOUT 5 20 mV VIN = 8 V, 0 ≤ IOUT ≤ IFULL LOAD 6
Load Regulation (LM1086-5.0) over TJ range ΔVOUT 10 35 mV TJ over the entire range for operation, VIN = 8 V, 0 ≤ IOUT ≤ IFULL LOAD 6
Dropout Voltage (LM1086-5.0) 1.3 1.5 V ΔVREF, ΔVOUT = 1%, IOUT = 1.5A 6
Current Limit (LM1086-5.0) ILIMIT 1.5 2.7 A VIN = 10 V 6
Quiescent Current (LM1086-5.0) 5 10 mA VIN ≤ 20 V 6
Thermal Regulation 0.008 0.04 %/W TA = 25°C, 30ms Pulse 6
Ripple Rejection (LM1086-5.0) 60 68 dB fRIPPLE = 120 Hz, COUT = 25 µF Tantalum, IOUT = 1.5 A, VIN = 8 V 6
Long Term Stability 0.3 1 % TA = 125°C, 1000 Hrs 6
Junction-to-ambient thermal resistance (TO-220, NDE) RθJA 23 °C/W 5
Junction-to-case (top) thermal resistance (TO-220, NDE) RθJC(top) 16.1 °C/W 5
Junction-to-board thermal resistance (TO-220, NDE) RθJB 4.5 °C/W 5
Junction-to-top characterization parameter (TO-220, NDE) ψJT 2.4 °C/W 5
Junction-to-board characterization parameter (TO-220, NDE) ψJB 2.5 °C/W 5
Junction-to-case (bottom) thermal resistance, Control Section (TO-220, NDE) RθJC(bot) 1.5 °C/W Control Section 5
Junction-to-case (bottom) thermal resistance, Output Section (TO-220, NDE) RθJC(bot) 4 °C/W Output Section 5

CAD (KiCad official)

  • Symbol: LM1086CT-5.0
  • Footprint: Package_TO_SOT_THT:TO-220-3_Vertical
  • 3D model: TO-220 (KiCad packages3D, STEP)
  • 3D model files: lm1086ct-5-0-etched.step / lm1086ct-5-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm1086ct-5-0.step / lm1086ct-5-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 cf9e81593df93656, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF