3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16F818-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil
PIC16F818-I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/VREF- | bidirectional | Bidirectional I/O pin with analog input channel 2, also serving as the A/D reference voltage (low) input. |
| 2 | RA3/AN3/VREF+ | bidirectional | Bidirectional I/O pin with analog input channel 3, also serving as the A/D reference voltage (high) input. |
| 3 | RA4/AN4/T0CKI | bidirectional | Bidirectional I/O pin with analog input channel 4 and Schmitt Trigger input, also serving as the clock input to the TMR0 timer/counter. |
| 4 | RA5/MCLR/VPP | input | Input-only pin that functions as the active-low Master Clear (Reset) input to the device and as the programming voltage input (VPP), with a programming threshold voltage. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | Bidirectional I/O pin with TTL input buffer that serves as the external interrupt pin, using a Schmitt Trigger input when configured as the external interrupt. |
| 7 | RB1/SDI/SDA | bidirectional | Bidirectional I/O pin that serves as the SPI data input and as the I2C data line (SDA). |
| 8 | RB2/SDO/CCP1 | bidirectional | Bidirectional I/O pin that serves as the SPI data output and as the CCP1 capture input, compare output, or PWM output. |
| 9 | RB3/CCP1/PGM | bidirectional | Bidirectional I/O pin that serves as the CCP1 capture input, compare output, or PWM output, and as the low-voltage ICSP programming enable pin (PGM). |
| 10 | RB4/SCK/SCL | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the SPI synchronous serial clock input/output and as the I2C serial clock input (SCL). |
| 11 | RB5/SS | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the slave select input for SPI in Slave mode. |
| 12 | RB6/T1OSO/T1CKI/PGC | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the Timer1 oscillator output, Timer1 clock input, and in-circuit debugger and ICSP programming clock (PGC). |
| 13 | RB7/T1OSI/PGD | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the Timer1 oscillator input and in-circuit debugger and ICSP programming data (PGD). |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | RA6/OSC2/CLKO | bidirectional | Bidirectional I/O pin that serves as the oscillator crystal output in crystal mode, or outputs CLKO at 1/4 the OSC1 frequency in RC mode. |
| 16 | RA7/OSC1/CLKI | bidirectional | Bidirectional I/O pin that serves as the oscillator crystal input or the external clock source input (CLKI). |
| 17 | RA0/AN0 | bidirectional | Bidirectional I/O pin with analog input channel 0. |
| 18 | RA1/AN1 | bidirectional | Bidirectional I/O pin with analog input channel 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-18-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (PIC16F818/819, non-LF) | VDD | 4 | 5.5 | V | 117 | ||
| RAM data retention voltage | VDR | 1.5 | V | 117 | |||
| VDD start voltage to ensure internal Power-on Reset signal | VPOR | 0.7 | V | See Section 12.4 Power-on Reset (POR) | 117 | ||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See Section 12.4 Power-on Reset (POR) | 117 | ||
| Brown-out Reset voltage (PIC16F818/819) | VBOR | 3.65 | 4.35 | V | FMAX = 14 MHz | 117 | |
| Power-down current (Sleep), all devices | IPD | 0.6 | 1 | µA | -40°C, VDD = 5.0V | 118 | |
| Power-down current (Sleep), all devices | IPD | 1.2 | 5 | µA | +85°C, VDD = 5.0V | 118 | |
| Supply current, LP oscillator 32 kHz | IDD | 32 | 40 | µA | -40°C, VDD = 5.0V, FOSC = 32 kHz (LP Oscillator) | 119 | |
| Supply current, LP oscillator 32 kHz | IDD | 26 | 35 | µA | +25°C, VDD = 5.0V, FOSC = 32 kHz (LP Oscillator) | 119 | |
| Supply current, RC oscillator 1 MHz | IDD | 310 | 380 | µA | -40°C, VDD = 5.0V, FOSC = 1 MHz (RC Oscillator) | 120 | |
| Supply current, RC oscillator 1 MHz | IDD | 290 | 360 | µA | +25°C, VDD = 5.0V, FOSC = 1 MHz (RC Oscillator) | 120 | |
| Supply current, RC oscillator 1 MHz | IDD | 280 | 360 | µA | +85°C, VDD = 5.0V, FOSC = 1 MHz (RC Oscillator) | 120 | |
| Supply current, RC oscillator 4 MHz | IDD | 900 | 1060 | µA | -40°C, VDD = 5.0V, FOSC = 4 MHz (RC Oscillator) | 120 | |
| Supply current, RC oscillator 4 MHz | IDD | 890 | 1050 | µA | +25°C, VDD = 5.0V, FOSC = 4 MHz (RC Oscillator) | 120 | |
| Supply current, HS oscillator 20 MHz | IDD | 3 | 4.2 | mA | -40°C, VDD = 5.0V, FOSC = 20 MHz (HS Oscillator) | 121 | |
| Supply current, HS oscillator 20 MHz | IDD | 2.5 | 4 | mA | +25°C, VDD = 5.0V, FOSC = 20 MHz (HS Oscillator) | 121 | |
| Supply current, internal RC_RUN 31.25 kHz | IDD | 32 | 40 | µA | -40°C, VDD = 5.0V, FOSC = 31.25 kHz (RC_RUN, Internal RC Oscillator) | 122 | |
| Supply current, internal RC_RUN 31.25 kHz | IDD | 29 | 35 | µA | +25°C, VDD = 5.0V, FOSC = 31.25 kHz (RC_RUN, Internal RC Oscillator) | 122 | |
| Watchdog Timer differential current | IWDT | 3 | 10 | µA | -40°C, VDD = 5.0V | 124 | |
| Watchdog Timer differential current | IWDT | 3.3 | 10 | µA | +25°C, VDD = 5.0V | 124 | |
| Watchdog Timer differential current | IWDT | 3.9 | 13 | µA | +85°C, VDD = 5.0V | 124 | |
| Brown-out Reset differential current | IBOR | 40 | 60 | µA | -40°C to +85°C, VDD = 5.0V | 124 | |
| Timer1 oscillator differential current, 32 kHz | IOSCB | 3 | 6 | µA | -40°C, VDD = 5.0V, 32 kHz on Timer1 | 124 | |
| Timer1 oscillator differential current, 32 kHz | IOSCB | 3.2 | 6 | µA | +25°C, VDD = 5.0V, 32 kHz on Timer1 | 124 | |
| Timer1 oscillator differential current, 32 kHz | IOSCB | 3.4 | 7 | µA | +85°C, VDD = 5.0V, 32 kHz on Timer1 | 124 | |
| A/D converter differential current, A/D on, Sleep, not converting | IAD | 0.003 | 2 | µA | -40°C to +85°C, VDD = 5.0V | 124 | |
| Internal RC accuracy INTOSC (8 MHz to 125 kHz) | INTOSC | -5 | 1 | 5 | % | +25°C, VDD = 4.5-5.5V | 125 |
| Internal RC accuracy INTOSC (8 MHz to 125 kHz) | INTOSC | -25 | 25 | % | -10°C to +85°C, VDD = 4.5-5.5V | 125 | |
| Internal RC accuracy INTOSC (8 MHz to 125 kHz) | INTOSC | -30 | 30 | % | -40°C to +85°C, VDD = 4.5-5.5V | 125 | |
| INTRC accuracy @ 31 kHz (after calibration) | INTRC | 26.562 | 35.938 | kHz | -40°C to +85°C, VDD = 4.5-5.5V | 125 | |
| Input low voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 126 | ||
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 126 | ||
| Input low voltage, OSC1 in XT and LP mode | VIL | 0.3 | V | OSC1 in XT and LP mode | 126 | ||
| Input high voltage, OSC1 in XT and LP mode | VIH | 1.6 | V | OSC1 in XT and LP mode | 126 | ||
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 126 |
| Input leakage current, I/O ports | IIL | -1 | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 126 | |
| Input leakage current, MCLR | IIL | -5 | 5 | µA | VSS ≤ VPIN ≤ VDD | 126 | |
| Input leakage current, OSC1 | IIL | -5 | 5 | µA | VSS ≤ VPIN ≤ VDD, XT, HS and LP oscillator configuration | 126 | |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +125°C | 127 | ||
| Output low voltage, OSC2/CLKO (RC oscillator config) | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +125°C | 127 | ||
| OSC2 pin capacitive loading | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 127 | ||
| All I/O pins and OSC2 capacitive loading (RC mode) | CIO | 50 | pF | In RC mode | 127 | ||
| SCL, SDA capacitive loading in I2C mode | CB | 400 | pF | I2C mode | 127 | ||
| VDD for read/write, data EEPROM | VDRW | 5.5 | V | Using EECON to read/write, VMIN = min. operating voltage | 127 | ||
| Data EEPROM erase/write cycle time | TDEW | 4 | 8 | ms | 127 | ||
| Program Flash erase cycle time | TPE | 2 | 4 | ms | 127 | ||
| Program Flash write cycle time | TPW | 2 | 4 | ms | 127 | ||
| Ambient temperature under bias | -40 | 125 | °C | 115 | |||
| Storage temperature | -65 | 150 | °C | 115 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 115 | ||
| Voltage on MCLR with respect to VSS | VMCLR | -0.3 | 14 | V | 115 | ||
| Total power dissipation | 1 | W | 115 |
CAD (KiCad official)
- Symbol:
PIC16F818-I - Footprint:
Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm - 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16f818-i-etched.step/pic16f818-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f818-i.step/pic16f818-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (178 pp, sha256
0b7ca55825dbf90b, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).