Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISL8844AABZ-T

RENESAS · AC-DC Controllers & Regulators · SOIC-8

ISL8844AABZ-T from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Error amplifier output and PWM comparator input, with the loop compensation network connected between COMP and FB.
2 FB input Output voltage feedback to the inverting input of the error amplifier, whose non-inverting input is tied internally to a 2.5V reference.
3 CS input Current sense input to the PWM comparator, nominally 0V to 1.0V with an internal offset of 100mV.
4 RTCT passive Oscillator timing pin where RT from VREF and CT to GND set the switching frequency (up to 2.0MHz) and maximum duty cycle.
5 GND power_in Power and small signal reference ground for all functions.
6 OUT output High current gate drive output with 1.0A peak current, actively held low when VDD is below the UVLO threshold.
7 VDD power_in Device supply, 9V to 30V operating range (absolute max 30V), to be bypassed to GND with a ceramic capacitor close to the pins.
8 VREF power_out 5.00V reference voltage output, +1.0/-1.5% over line, load and temperature, bypassed to GND with 0.1uF to 3.3uF.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-8
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD -0.3 30 V relative to GND 6
OUT Voltage OUT -0.3 0.3 V GND -0.3V to VDD + 0.3V (max given as VDD + 0.3V) 6
Signal Pins Voltage -0.3 6 V GND -0.3V to 6.0V 6
Peak GATE Current 1 A 6
ESD MM 200 V Machine Model 6
ESD CDM 1000 V Charged Device Model 6
Maximum Junction Temperature -55 150 °C 6
Storage Temperature Range -65 150 °C 6
Lead Temperature (Soldering 10s) 300 °C SOIC lead tips only 6
Operating Temperature Range -40 105 °C ISL884xAAxZ 6
Supply Voltage Range VDD 9 30 V ISL884xA (Typical, Note 2) 6
Thermal Resistance θJA 100 °C/W SOIC package, Typical 6
START Threshold 13.3 14.3 15.3 V ISL8842A, ISL8844A (Note 6) 6
STOP Threshold 8 8.8 9.6 V ISL8842A, ISL8844A 6
Hysteresis 5.4 V ISL8842A, ISL8844A 6
Startup Current IDD 90 125 µA VDD < START Threshold 6
Operating Current IDD 2.9 4 mA Note 4 6
Operating Supply Current ID 4.75 5.5 mA Includes 1nF GATE loading 6
Reference Voltage Overall Accuracy VREF 4.925 5 5.05 V Over line (VDD = 12V to 30V), load, temperature 6
Reference Long Term Stability 5 mV TA = +125°C, 1000 hours (Note 5) 6
Reference Current Limit, Sourcing -20 mA 6
Reference Current Limit, Sinking 5 mA 6
CS Input Bias Current -1 1 µA VCS = 1V 6
CS Offset Voltage 95 100 105 mV VCS = 0V (Note 5) 6
COMP to PWM Comparator Offset Voltage 0.8 1.15 1.3 V VCS = 0V (Note 5) 6
Input Signal, Maximum 0.97 1 1.03 V 7
Gain ACS 2.5 3 3.5 V/V 0 < VCS < 910mV, VFB = 0V 7
CS to OUT Delay 35 55 ns 7
Open Loop Voltage Gain 60 90 dB Note 5 7
Unity Gain Bandwidth 1 1.5 MHz Note 5 7
Error Amplifier Reference Voltage 2.475 2.5 2.53 V VFB = VCOMP 7
FB Input Bias Current -1 -0.2 1 µA VFB = 0V 7
COMP Sink Current 1 mA VCOMP = 1.5V, VFB = 2.7V 7
COMP Source Current -0.4 mA VCOMP = 1.5V, VFB = 2.3V 7
COMP VOH VOH 4.8 V VFB = 2.3V (max printed as VREF) 7
COMP VOL VOL 0.4 1 V VFB = 2.7V 7
PSRR PSRR 60 80 dB Frequency = 120Hz, VDD = 12V to 30V (Note 5) 7
Oscillator Frequency Accuracy 48 51 53 kHz Initial, TA = +25°C 7
Frequency Variation with VDD 0.2 1 % TA= +25°C, (f30V - f10V)/f30V 7
Temperature Stability 5 % Note 5 7
Oscillator Amplitude, Peak to Peak 1.75 V Static Test 7
RTCT Discharge Voltage (Valley Voltage) 1 V Static Test 7
Discharge Current 6.5 7.8 8.5 mA RTCT = 2.0V 7
Gate VOH 1 2 V VDD to OUT, IOUT = -200mA 7
Gate VOL 1 2 V OUT to GND, IOUT = 200mA 7
Peak Output Current 1 A COUT = 1nF (Note 5) 7
Rise Time 20 40 ns COUT = 1nF (Note 5) 7
Fall Time 20 40 ns COUT = 1nF (Note 5) 7
GATE VOL UVLO Clamp Voltage 1.2 V VDD = 5V, ILOAD = 1mA 7
Maximum Duty Cycle 47 48 % COMP = VREF 7
Minimum Duty Cycle 0 % COMP = GND 7

CAD (KiCad official)

  • Symbol: ISL8844AABZ-T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: isl8844aabz-t-etched.step / isl8844aabz-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl8844aabz-t.step / isl8844aabz-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (15 pp, sha256 58b9589491eb4225, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF