component
NSI1306M25-DSWR
Public Made by Adomby adom
NOVOSENSE RF Modulators / Demodulator, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNSI1306M25-DSWR
NOVOSENSE · RF Modulators / Demodulator · SOP-16-300mil
NSI1306M25-DSWR from NOVOSENSE, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Internally connected to AVDD; this pin can be left floating or tied to AVDD. |
| 2 | INP | input | Positive analog input; ±250mV is recommended for NSI1306M25 (±50mV for NSI1306M05). |
| 3 | INN | input | Negative analog input. |
| 4 | AGND | power_in | Analog ground reference. |
| 5 | NC | unconnected | Not internally connected; this pin can be left floating or tied to AVDD or AGND. |
| 6 | NC | unconnected | Not internally connected; this pin can be left floating or tied to AVDD or AGND. |
| 7 | AVDD | power_in | Power supply for the analog side, 3.0 V to 5.5 V. |
| 8 | AGND | power_in | Analog ground reference. |
| 9 | DGND | power_in | Digital ground reference. |
| 10 | NC | unconnected | Not internally connected; this pin can be left floating or tied to DVDD or DGND. |
| 11 | DOUT | output | Modulator data output. |
| 12 | NC | unconnected | Not internally connected; this pin can be left floating or tied to DVDD or DGND. |
| 13 | CLKIN | input | Modulator clock input, 5 to 21 MHz. |
| 14 | DVDD | power_in | Power supply for the digital side, 3.0 V to 5.5 V. |
| 15 | NC | unconnected | Not internally connected; this pin can be left floating or tied to DVDD or DGND. |
| 16 | DGND | power_in | Digital ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NOVOSENSE |
| Package | SOP-16-300mil |
| Category | Radio Frequency Chip/Antenna |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | AVDD, DVDD | -0.3 | 6.5 | V | 5 | ||
| Analog Input Voltage | INP, INN | -6 | V | Printed AGND-6 (AGND = 0 V) to AVDD+0.5 V; max is supply-relative | 5 | ||
| Digital Input Voltage | CLKIN | -0.5 | V | Printed DGND-0.5 to DVDD+0.5 V; min referenced to DGND = 0 V | 5 | ||
| Digital Output Voltage | DOUT | -0.5 | V | Printed DGND-0.5 to DVDD+0.5 V; min referenced to DGND = 0 V | 5 | ||
| Output current per Output Pin | Io | -10 | 10 | mA | 5 | ||
| Operating Temperature | TOPR | -40 | 125 | ℃ | 5 | ||
| Junction Temperature | TJ | -40 | 150 | ℃ | 5 | ||
| Storage Temperature | TSTG | -55 | 150 | ℃ | 5 | ||
| Electrostatic discharge HBM | HBM | -2000 | 2000 | V | Human body model, per AEC-Q100-002-RevD | 5 | |
| Electrostatic discharge CDM | CDM | -1000 | 1000 | V | Charged device model, per AEC-Q100-011-RevB | 5 | |
| Analog Side Power Supply | AVDD | 3 | 5 | 5.5 | V | 5 | |
| Digital Side Power Supply | DVDD | 3 | 3.3 | 5.5 | V | 5 | |
| Differential input voltage before clipping output (M25) | VClipping | -320 | 320 | mV | NSI1306M25 | 5 | |
| Linear differential input full scale voltage (M25) | VFSR | -250 | 250 | mV | NSI1306M25 | 5 | |
| Operating common-mode input voltage (M25) | VCM | -0.16 | 0.8 | V | NSI1306M25 | 5 | |
| Operating Ambient Temperature | TA | -40 | 125 | ℃ | 5 | ||
| Analog Side Under-voltage detection threshold voltage | AVDDUV | 1.8 | 2.3 | 2.7 | V | AVDD falling | 8 |
| Analog Side Supply Current | IAVDD | 11.4 | 15.1 | mA | 8 | ||
| Digital Side Supply Current | IDVDD | 1.78 | 2.5 | mA | 8 | ||
| Input bias current | IIB | -24 | -18 | -12 | µA | INP = INN = AGND, IIB = (IIBP + IIBN) / 2 | 8 |
| Input bias current drift | TCIIB | -1 | 1 | nA/℃ | 8 | ||
| Common-mode transient immunity | CMTI | 100 | 150 | kV/μs | 8 | ||
| Differential nonlinearity | DNL | -0.99 | 0.99 | LSB | 8 | ||
| Integral nonlinearity | INL | -4 | 1 | 4 | LSB | 8 | |
| Offset error | EO | -100 | 4.5 | 100 | µV | INP = INN = AGND | 8 |
| Offset error thermal drift | TCEO | -0.5 | 0.15 | 1.5 | µV/℃ | 8 | |
| Gain error | EG | -0.2 | 0.005 | 0.2 | % | 8 | |
| Gain error thermal drift | TCEG | -40 | 20 | 40 | ppm/℃ | 8 | |
| Signal to noise ratio | SNR | 82 | 86 | dB | fIN = 1kHz | 9 | |
| Signal to noise and distortion | SINAD | 82 | 86 | dB | fIN = 1kHz | 9 | |
| Total harmonic distortion | THD | -95 | -85 | dB | fIN = 1kHz | 9 | |
| Spurious-free dynamic range | SFDR | 83 | 100 | dB | fIN = 1kHz | 9 | |
| Input current | IIN | 0 | 7 | µA | DGND ≤ VIN ≤ DVDD | 9 | |
| Low-level input voltage | VIL | -0.3 | V | Printed upper limit 0.3×DVDD | 9 | ||
| Low-level output voltage (IOL = 20µA) | VOL | 0.1 | V | IOL = 20µA | 9 | ||
| Low-level output voltage (IOL = 4mA) | VOL | 0.4 | V | IOL = 4mA | 9 | ||
| CLKIN clock frequency | fCLKIN | 5 | 21 | MHz | 9 | ||
| CLKIN clock period | tCLKIN | 47.6 | 200 | ns | 9 | ||
| CLKIN clock high time | tHIGH | 20 | 25 | 120 | ns | 9 | |
| CLKIN clock low time | tLOW | 20 | 25 | 120 | ns | 9 | |
| DOUT rising time | tr | 5 | ns | CLOAD = 15pF | 9 | ||
| DOUT falling time | tf | 5 | ns | CLOAD = 15pF | 9 | ||
| DOUT hold time after rising edge of CLKIN | tH | 3.5 | ns | CLOAD = 15pF | 9 | ||
| Rising edge of CLKIN to DOUT valid delay | tD | 15 | ns | CLOAD = 15pF | 9 | ||
| Analog setting time | tAS | 0.5 | ms | AVDD step to 3.0 V with DVDD ≥ 3.0 V, to DOUT valid, 0.1% settling | 9 | ||
| Common-mode overvoltage detection level | VCMov | 0.9 | V | 8 | |||
| Common-mode rejection ratio (DC) | CMRRdc | -106 | dB | INP = INN, fIN = 0 Hz, VCM min ≤ VIN ≤ VCM max | 8 | ||
| Common-mode rejection ratio (AC) | CMRRac | -104 | dB | INP = INN, fIN = 10 kHz, VCM min ≤ VIN ≤ VCM max | 8 | ||
| Single-ended input resistance | RIN | 19 | kΩ | INN = AGND | 8 | ||
| Differential input resistance | RIND | 22 | kΩ | 8 | |||
| Input capacitance | CI | 2 | pF | 8 | |||
| Power supply rejection ratio (DC) | PSRR | -100 | dB | PSRR vs AVDD, at DC | 9 | ||
| Power supply rejection ratio (100mV, 10kHz ripple) | PSRR | -90 | dB | PSRR vs AVDD, 100mV and 10kHz ripple | 9 | ||
| Input capacitance (digital) | CIN | 5 | pF | 9 | |||
| Junction-to-ambient thermal resistance (SOP16) | RθJA | 82 | ℃/W | 5 | |||
| Junction-to-case (top) thermal resistance (SOP16) | RθJC(top) | 42 | ℃/W | 6 | |||
| Junction-to-board thermal resistance (SOP16) | RθJB | 46 | ℃/W | 6 | |||
| Junction-to-top characterization parameter (SOP16) | ΨJT | 12 | ℃/W | 6 | |||
| Junction-to-board characterization parameter (SOP16) | ΨJB | 46 | ℃/W | 6 |
CAD (KiCad official)
- Symbol:
NSI1306M25-DSWR - Footprint:
Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
nsi1306m25-dswr-etched.step/nsi1306m25-dswr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nsi1306m25-dswr.step/nsi1306m25-dswr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NOVOSENSE datasheet (26 pp, sha256
2a8af086877b20b6, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).