3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC29301S-3.3
HGSEMI · Linear Voltage Regulators (LDO) · TO-263-5
MIC29301S-3.3 from HGSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | CMOS-compatible control input: logic high enables the regulator, while logic low or open puts it in shutdown. |
| 2 | IN | power_in | Supply input with a +16V maximum supply voltage. |
| 3 | GND | power_in | Ground pin; the ground pin and TAB are internally connected. |
| 4 | OUT | power_out | Regulator output. |
| 5 | FLG | output | Open-collector error flag output. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TO-263-5 |
| Category | Power Management |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | -1 | 1 | % | 10mA | 6 | |
| Output Voltage | VOUT | -2 | 2 | % | 10mA ≤ IOUT ≤ 3A,VOUT+1V ≤ VIN ≤ 8V | 6 | |
| Line Regulation | 0.06 | 0.5 | % | IOUT=10mA,VOUT + 1V ≤ VIN ≤ 8V | 6 | ||
| Line Regulation | 0.2 | 1 | % | VIN=VOUT+1V,10mA ≤ IOUT ≤ 3A | 6 | ||
| Output Voltage Temp. Coefficient | ∆VOUT/∆T | 20 | 100 | ppm/℃ | Note 5 | 6 | |
| Dropout Voltage | VDD | 80 | 200 | mV | IOUT=100mA,∆VOUT=-1% | 6 | |
| Dropout Voltage | VDD | 400 | 500 | mV | IOUT=3A,∆VOUT=-1% | 6 | |
| Ground Current | IGND | 10 | 20 | mA | IOUT=750mA,VIN=VOUT+1V | 6 | |
| Enable Input Voltage logic low (off) | VEN | 0.8 | V | logic low(off) | 6 | ||
| Enable Input Voltage logic high (on) | VEN | 2.25 | V | logic high(on) | 6 | ||
| Enable Input Current | IIN | 15 | 30 | 75 | µA | VEN=VIN | 6 |
| Enable Input Current | IIN | 2 | 4 | µA | VEN=0.8V | 6 | |
| Shutdown Output Current | IOUT(shdn) | 10 | 20 | µA | Note 8 | 6 | |
| Output Leakage Current | IFLG(leak) | 0.01 | 1 | 2 | µA | VOH=16V | 6 |
| Output Low Voltage | VFLG(do) | 220 | 300 | 400 | mV | VIN=2.250V,IOL=250µA,Note 9 | 6 |
| Supply Voltage | VIN | -20 | 20 | V | 4 | ||
| Enable Voltage | VEN | 20 | V | 4 | |||
| Storage Temperature | TS | -65 | 150 | ℃ | 4 | ||
| Lead Temperature | ESD | 245 | ℃ | soldering, 10 sec | 4 | ||
| Supply Voltage | VIN | 2.25 | 16 | V | 4 | ||
| Enable Voltage | VEN | 16 | V | 4 | |||
| Junction Temperature | TJ | -40 | 125 | ℃ | 4 | ||
| Thermal Resistance Junction-to-Case | θJC | 5 | ℃/W | TO-263 | 4 | ||
| Dropout Voltage | VDD | 200 | mV | IOUT=750mA,∆VOUT=-1% | 6 | ||
| Dropout Voltage | VDD | 320 | mV | IOUT=1.5A,∆VOUT=-1% | 6 | ||
| Ground Current | IGND | 17 | mA | IOUT=1.5A,VIN=VOUT+1V | 6 | ||
| Ground Current | IGND | 45 | mA | IOUT=3A,VIN=VOUT+1V | 6 | ||
| Dropout Ground Pin Current | IGND(do) | 6 | mA | VIN≤VOUT(nomina)-0.5V,IOUT=10mA | 6 | ||
| Current Limit | IOUT(lim) | 4.5 | A | VOUT=0V,VIN=VOUT+1V | 6 | ||
| VFLG Low Threshold | VFLG | 93 | % | % of VOUT | 6 | ||
| VFLG High Threshold | VFLG | 99.2 | % | 6 | |||
| VFLG Hysteresis | VFLG | 1 | % | 6 |
CAD (KiCad official)
- Symbol:
MIC29301S-3.3 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
mic29301s-3-3-etched.step/mic29301s-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic29301s-3-3.step/mic29301s-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (14 pp, sha256
c4cac39867290649, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).