3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS70102PWP
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HTSSOP-20-EP
TPS70102PWP from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; the pin is not internally connected and is listed as NC in the terminal table. |
| 2 | VIN1 | power_in | Input voltage of regulator 1; recommended input range is 2.7 V to 6 V and the internal bias is powered from VIN1, with UVLO threshold of 2.4 V to 2.65 V. |
| 3 | VIN1 | power_in | Input voltage of regulator 1; recommended input range is 2.7 V to 6 V and the internal bias is powered from VIN1, with UVLO threshold of 2.4 V to 2.65 V. |
| 4 | MR1 | input | Manual reset input 1, active low, pulled up internally to VIN1 through a 6 mA source; logic low (≤0.7 V) triggers a RESET. |
| 5 | MR2 | input | Manual reset input 2, active low, pulled up internally to VIN1 through a 6 mA source; logic low (≤0.7 V) triggers a RESET. |
| 6 | EN | input | Active-low enable: a high level (≥2 V) puts the device in shutdown, a low level (≤0.7 V) enables it, and the input current is limited to -1 mA to 1 mA. |
| 7 | SEQ | input | Power-up sequence control: high or open sets VOUT2 to power up first and low sets VOUT1 first; it has a 6 mA internal pull-up to VIN1 and thresholds of 2 V (high) and 0.7 V (low). |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | VIN2 | power_in | Input voltage of regulator 2; recommended input range is 2.7 V to 6 V. |
| 10 | VIN2 | power_in | Input voltage of regulator 2; recommended input range is 2.7 V to 6 V. |
| 11 | NC | unconnected | No connection; the pin is not internally connected and is listed as NC in the terminal table. |
| 12 | VOUT2 | power_out | Output voltage of regulator 2, rated for up to 250 mA of output current. |
| 13 | VOUT2 | power_out | Output voltage of regulator 2, rated for up to 250 mA of output current. |
| 14 | VSENSE2/FB2 | input | Regulator 2 output voltage sense for the fixed-output option or feedback input for the adjustable option; keep the connection as short as possible to avoid noise pickup. |
| 15 | RESET | output | Open-drain, active-low power-on reset (SVS) output indicating VOUT2 and MR1/MR2 status; it releases high-impedance after a 120 ms delay when VOUT2 exceeds 95% of its regulated voltage and requires a pull-up resistor. |
| 16 | PG1 | output | Open-drain power-good output that goes low when VOUT1 is below 95% of its nominal regulated voltage and goes high-impedance when VOUT1 reaches 95%; it requires a pull-up resistor. |
| 17 | VSENSE1/FB1 | input | Regulator 1 output voltage sense for the fixed-output option or feedback input for the adjustable option; keep the connection as short as possible to avoid noise pickup. |
| 18 | VOUT1 | power_out | Output voltage of regulator 1, rated for up to 500 mA of output current. |
| 19 | VOUT1 | power_out | Output voltage of regulator 1, rated for up to 500 mA of output current. |
| 20 | NC | unconnected | No connection; the pin is not internally connected and is listed as NC in the terminal table. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20-EP |
| Category | Power Management (PMIC) |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage (FB connected to VO) | 1.196 | 1.22 | 1.244 | V | 2.7V < VI < 6V, FB connected to VO; TJ = -40°C to +125°C; typ at TJ = +25°C | 4 | |
| Output voltage line regulation | ∆VO/VO | 0.01 | 0.1 | % | VO + 1V < VI ≤ 6V | 4 | |
| Quiescent current (GND current), regulator 1 and regulator 2 | 190 | 230 | mA | EN = 0V; VO + 1V < VI ≤ 6V; typ at TJ = +25°C | 4 | ||
| Output current limit, regulator 1 | 1.6 | 1.9 | A | VOUT = 0V | 5 | ||
| Output current limit, regulator 2 | 0.75 | 1 | A | VOUT = 0V | 5 | ||
| Standby current, regulator 1 | I(standby) | 1 | 3 | mA | EN = VI (typ at TJ = +25°C) | 5 | |
| Standby current, regulator 2 | I(standby) | 1 | 3 | mA | EN = VI (typ at TJ = +25°C) | 5 | |
| RESET trip threshold voltage | 92 | 95 | 98 | %VOUT | VO decreasing | 5 | |
| PG1 trip threshold voltage | 92 | 95 | 98 | %VOUT | VO decreasing | 5 | |
| RESET pulse duration | t(RESET) | 80 | 120 | 160 | ms | 5 | |
| VOUT2 UV comparator positive-going threshold | 80 | 83 | 86 | %VO | 5 | ||
| VOUT1 UV comparator positive-going threshold | 80 | 83 | 86 | %VO | 6 | ||
| RESET output low voltage | 0.15 | 0.4 | V | VI = 3.5V, IO(RESET) = 1mA | 5 | ||
| PG1 output low voltage | 0.15 | 0.4 | V | VI = 2.7V, IO(PG1) = 1mA | 5 | ||
| Minimum input voltage for valid RESET | 1 | 1.3 | V | IRESET = 300mA, V(RESET) ≤ 0.8V | 5 | ||
| Minimum input voltage for valid PG1 | 1 | 1.3 | V | I(PG1) = 300mA, V(PG1) ≤ 0.8V | 5 | ||
| EN high level input voltage | 2 | V | 5 | ||||
| EN low level input voltage | 0.7 | V | 5 | ||||
| EN input current | -1 | 1 | mA | 5 | |||
| SEQ high level input voltage | 2 | V | 5 | ||||
| SEQ low level input voltage | 0.7 | V | 5 | ||||
| MR1 / MR2 high level input voltage | 2 | V | 5 | ||||
| MR1 / MR2 low level input voltage | 0.7 | V | 5 | ||||
| VIN1 UVLO threshold | 2.4 | 2.65 | V | 6 | |||
| Input voltage range (regulator 1 and 2) | VI | 2.7 | 6 | V | Regulator 1 and regulator 2 | 4 | |
| Output current, regulator 1 | IO | 0 | 500 | mA | 4 | ||
| Output current, regulator 2 | IO | 0 | 250 | mA | 4 | ||
| Output voltage range (adjustable option) | 1.22 | 5.5 | V | 4 | |||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Input voltage range VIN1, VIN2 | -0.3 | 7 | V | Voltages tied to network ground | 3 | ||
| Voltage range at EN | -0.3 | 7 | V | 3 | |||
| Output voltage range (VOUT1, VSENSE1) | 5.5 | V | 3 | ||||
| Output voltage range (VOUT2, VSENSE2) | 5.5 | V | 3 | ||||
| Maximum RESET, PG1 voltage | 7 | V | 3 | ||||
| Junction temperature range | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Junction-to-ambient thermal resistance | θJA | 74.1 | °C/W | PWP (20 pins), Thermal Information table | 4 | ||
| Junction-to-case (top) thermal resistance | θJCtop | 43.1 | °C/W | PWP (20 pins) | 4 | ||
| Junction-to-board thermal resistance | θJB | 19.7 | °C/W | PWP (20 pins) | 4 | ||
| Junction-to-top characterization parameter | ψJT | 2.9 | °C/W | PWP (20 pins) | 4 | ||
| Junction-to-board characterization parameter | ψJB | 17.3 | °C/W | PWP (20 pins) | 4 | ||
| Junction-to-case (bottom) thermal resistance | θJCbot | 1.4 | °C/W | PWP (20 pins) | 4 | ||
| Junction-to-ambient thermal resistance (power dissipation section) | RθJA | 32.6 | °C/W | 20-terminal PWP, no airflow | 33 |
CAD (KiCad official)
- Symbol:
TPS70102PWP - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps70102pwp-etched.step/tps70102pwp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps70102pwp.step/tps70102pwp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
d80cbe16566ccbe6, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).