component
STM32F205ZGT7
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-144(20x20). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32F205ZGT7
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-144(20x20)
STM32F205ZGT7 from STMicroelectronics, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TRACED0, FSMC_A19, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TRACED1, FSMC_A20, DCMI_D4, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TRACED2, FSMC_A21, TIM9_CH1, DCMI_D6, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TRACED3, FSMC_A22, TIM9_CH2, DCMI_D7, EVENTOUT. |
| 6 | VBAT | power_in | Backup supply for the RTC, 20 x 32-bit backup registers and optional 4 Kbyte backup SRAM. |
| 7 | PC13-RTC_AF1 | bidirectional | 5 V-tolerant (FT) I/O supplied through the power switch; sink current limited to 3 mA, output speed not above 2 MHz with 30 pF load, and must not be used as a current source. |
| 8 | PC14-OSC32_IN | bidirectional | I/O supplied through the power switch (3 mA sink limit, 2 MHz / 30 pF output limit); also the 32 kHz oscillator input OSC32_IN, where it is not 5 V tolerant in oscillator mode. |
| 9 | PC15-OSC32_OUT | bidirectional | I/O supplied through the power switch (3 mA sink limit, 2 MHz / 30 pF output limit); also the 32 kHz oscillator output OSC32_OUT, where it is not 5 V tolerant in oscillator mode. |
| 10 | PF0 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A0, I2C2_SDA, EVENTOUT. |
| 11 | PF1 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A1, I2C2_SCL, EVENTOUT. |
| 12 | PF2 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A2, I2C2_SMBA, EVENTOUT. |
| 13 | PF3 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A3, EVENTOUT; additional function ADC3_IN9. |
| 14 | PF4 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A4, EVENTOUT; additional function ADC3_IN14. |
| 15 | PF5 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A5, EVENTOUT; additional function ADC3_IN15. |
| 16 | VSS | power_in | Ground pin. |
| 17 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
| 18 | PF6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM10_CH1, FSMC_NIORD, EVENTOUT; additional function ADC3_IN4. |
| 19 | PF7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM11_CH1, FSMC_NREG, EVENTOUT; additional function ADC3_IN5. |
| 20 | PF8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM13_CH1, FSMC_NIOWR, EVENTOUT; additional function ADC3_IN6. |
| 21 | PF9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM14_CH1, FSMC_CD, EVENTOUT; additional function ADC3_IN7. |
| 22 | PF10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_INTR, EVENTOUT; additional function ADC3_IN8. |
| 23 | PH0-OSC_IN | bidirectional | 5 V-tolerant (FT) I/O except in oscillator mode; alternate function EVENTOUT; additional function OSC_IN (external high-speed oscillator input). |
| 24 | PH1-OSC_OUT | bidirectional | 5 V-tolerant (FT) I/O except in oscillator mode; alternate function EVENTOUT; additional function OSC_OUT (external high-speed oscillator output). |
| 25 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 26 | PC0 | bidirectional | 5 V-tolerant (FT) I/O; alternate function OTG_HS_ULPI_STP, EVENTOUT; additional function ADC123_IN10. |
| 27 | PC1 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions ETH_MDC, EVENTOUT; additional function ADC123_IN11. |
| 28 | PC2 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2, EVENTOUT; additional function ADC123_IN12. |
| 29 | PC3 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, EVENTOUT; additional function ADC123_IN13. |
| 30 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
| 31 | VSSA | power_in | Analog ground pin. |
| 32 | VREF+ | power_in | Positive reference voltage pin for the ADC and DAC. |
| 33 | VDDA | power_in | Analog supply pin; its voltage limits are given in the electrical characteristics, which are not in the supplied pages. |
| 34 | PA0-WKUP | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART2_CTS, UART4_TX, ETH_MII_CRS, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, EVENTOUT; additional functions ADC123_IN0 and WKUP. |
| 35 | PA1 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK, TIM5_CH2, TIM2_CH2, EVENTOUT; additional function ADC123_IN1. |
| 36 | PA2 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3, ETH_MDIO, EVENTOUT; additional function ADC123_IN2. |
| 37 | PA3 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0, ETH_MII_COL, EVENTOUT; additional function ADC123_IN3. |
| 38 | VSS | power_in | Ground pin. |
| 39 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
| 40 | PA4 | bidirectional | 3.3 V-tolerant (TTa) I/O; alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF, I2S3_WS, EVENTOUT; additional functions ADC12_IN4 and DAC_OUT1. |
| 41 | PA5 | bidirectional | 3.3 V-tolerant (TTa) I/O; alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N, EVENTOUT; additional functions ADC12_IN5 and DAC_OUT2. |
| 42 | PA6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN, EVENTOUT; additional function ADC12_IN6. |
| 43 | PA7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV, EVENTOUT; additional function ADC12_IN7. |
| 44 | PC4 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions ETH_RMII_RXD0, ETH_MII_RXD0, EVENTOUT; additional function ADC12_IN14. |
| 45 | PC5 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions ETH_RMII_RXD1, ETH_MII_RXD1, EVENTOUT; additional function ADC12_IN15. |
| 46 | PB0 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N, EVENTOUT; additional function ADC12_IN8. |
| 47 | PB1 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N, EVENTOUT; additional function ADC12_IN9. |
| 48 | PB2/BOOT1 | bidirectional | 5 V-tolerant (FT) I/O; alternate function EVENTOUT; BOOT1 is the boot-mode selection function of this pin. |
| 49 | PF11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions DCMI_D12, EVENTOUT. |
| 50 | PF12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A6, EVENTOUT. |
| 51 | VSS | power_in | Ground pin. |
| 52 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
| 53 | PF13 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A7, EVENTOUT. |
| 54 | PF14 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A8, EVENTOUT. |
| 55 | PF15 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A9, EVENTOUT. |
| 56 | PG0 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A10, EVENTOUT. |
| 57 | PG1 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A11, EVENTOUT. |
| 58 | PE7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D4, TIM1_ETR, EVENTOUT. |
| 59 | PE8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D5, TIM1_CH1N, EVENTOUT. |
| 60 | PE9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D6, TIM1_CH1, EVENTOUT. |
| 61 | VSS | power_in | Ground pin. |
| 62 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
| 63 | PE10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D7, TIM1_CH2N, EVENTOUT. |
| 64 | PE11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D8, TIM1_CH2, EVENTOUT. |
| 65 | PE12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D9, TIM1_CH3N, EVENTOUT. |
| 66 | PE13 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D10, TIM1_CH3, EVENTOUT. |
| 67 | PE14 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D11, TIM1_CH4, EVENTOUT. |
| 68 | PE15 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D12, TIM1_BKIN, EVENTOUT. |
| 69 | PB10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_SCK, I2S2_SCK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3, EVENTOUT. |
| 70 | PB11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_RMII_TX_EN, ETH_MII_TX_EN, TIM2_CH4, EVENTOUT. |
| 71 | VCAP_1 | passive | Voltage regulator decoupling pin; connect to the external VCAP capacitor (2.2 µF per the power supply scheme). |
| 72 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
| 73 | PB12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID, EVENTOUT. |
| 74 | PB13 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_SCK, I2S2_SCK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1, EVENTOUT; additional function OTG_HS_VBUS. |
| 75 | PB14 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N, EVENTOUT. |
| 76 | PB15 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP, RTC_50Hz, EVENTOUT. |
| 77 | PD8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D13, USART3_TX, EVENTOUT. |
| 78 | PD9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D14, USART3_RX, EVENTOUT. |
| 79 | PD10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D15, USART3_CK, EVENTOUT. |
| 80 | PD11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A16, USART3_CTS, EVENTOUT. |
| 81 | PD12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A17, TIM4_CH1, USART3_RTS, EVENTOUT. |
| 82 | PD13 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A18, TIM4_CH2, EVENTOUT. |
| 83 | VSS | power_in | Ground pin. |
| 84 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
| 85 | PD14 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D0, TIM4_CH3, EVENTOUT. |
| 86 | PD15 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D1, TIM4_CH4, EVENTOUT. |
| 87 | PG2 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A12, EVENTOUT. |
| 88 | PG3 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A13, EVENTOUT. |
| 89 | PG4 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A14, EVENTOUT. |
| 90 | PG5 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A15, EVENTOUT. |
| 91 | PG6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_INT2, EVENTOUT. |
| 92 | PG7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_INT3, USART6_CK, EVENTOUT. |
| 93 | PG8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART6_RTS, ETH_PPS_OUT, EVENTOUT. |
| 94 | VSS | power_in | Ground pin. |
| 95 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
| 96 | PC6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1, EVENTOUT. |
| 97 | PC7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2, EVENTOUT. |
| 98 | PC8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2, EVENTOUT. |
| 99 | PC9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2S2_CKIN, I2S3_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4, EVENTOUT. |
| 100 | PA8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF, EVENTOUT. |
| 101 | PA9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0, EVENTOUT; additional function OTG_FS_VBUS. |
| 102 | PA10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1, EVENTOUT. |
| 103 | PA11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM, EVENTOUT. |
| 104 | PA12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP, EVENTOUT. |
| 105 | PA13 | bidirectional | 5 V-tolerant (FT) I/O; default function JTMS-SWDIO (serial wire debug data), also EVENTOUT. |
| 106 | VCAP_2 | passive | Voltage regulator decoupling pin; connect to the external VCAP capacitor (2.2 µF per the power supply scheme). |
| 107 | VSS | power_in | Ground pin. |
| 108 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
| 109 | PA14 | bidirectional | 5 V-tolerant (FT) I/O; default function JTCK-SWCLK (serial wire debug clock), also EVENTOUT. |
| 110 | PA15 (JTDI) | bidirectional | 5 V-tolerant (FT) I/O; default function JTDI; alternate functions SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, EVENTOUT. |
| 111 | PC10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI3_SCK, I2S3_SCK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX, EVENTOUT. |
| 112 | PC11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX, EVENTOUT. |
| 113 | PC12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD, USART3_CK, EVENTOUT. |
| 114 | PD0 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D2, CAN1_RX, EVENTOUT. |
| 115 | PD1 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D3, CAN1_TX, EVENTOUT. |
| 116 | PD2 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT. |
| 117 | PD3 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_CLK, USART2_CTS, EVENTOUT. |
| 118 | PD4 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_NOE, USART2_RTS, EVENTOUT. |
| 119 | PD5 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_NWE, USART2_TX, EVENTOUT. |
| 120 | VSS | power_in | Ground pin. |
| 121 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
| 122 | PD6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_NWAIT, USART2_RX, EVENTOUT. |
| 123 | PD7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART2_CK, FSMC_NE1, FSMC_NCE2, EVENTOUT. |
| 124 | PG9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART6_RX, FSMC_NE2, FSMC_NCE3, EVENTOUT. |
| 125 | PG10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_NCE4_1, FSMC_NE3, EVENTOUT. |
| 126 | PG11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_NCE4_2, ETH_MII_TX_EN, ETH_RMII_TX_EN, EVENTOUT. |
| 127 | PG12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_NE4, USART6_RTS, EVENTOUT. |
| 128 | PG13 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A24, USART6_CTS, ETH_MII_TXD0, ETH_RMII_TXD0, EVENTOUT. |
| 129 | PG14 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A25, USART6_TX, ETH_MII_TXD1, ETH_RMII_TXD1, EVENTOUT. |
| 130 | VSS | power_in | Ground pin. |
| 131 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
| 132 | PG15 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART6_CTS, DCMI_D13, EVENTOUT. |
| 133 | PB3 | bidirectional | 5 V-tolerant (FT) I/O; default function JTDO/TRACESWO; alternate functions SPI3_SCK, I2S3_SCK, TIM2_CH2, SPI1_SCK, EVENTOUT. |
| 134 | PB4 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions NJTRST, SPI3_MISO, TIM3_CH1, SPI1_MISO, EVENTOUT. |
| 135 | PB5 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10, I2S3_SD, EVENTOUT. |
| 136 | PB6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX, EVENTOUT. |
| 137 | PB7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2C1_SDA, FSMC_NL, DCMI_VSYNC, USART1_RX, TIM4_CH2, EVENTOUT. |
| 138 | BOOT0 | input | Dedicated BOOT0 boot-mode input; also the VPP function for Flash programming with VPP. |
| 139 | PB8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX, EVENTOUT. |
| 140 | PB9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX, EVENTOUT. |
| 141 | PE0 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM4_ETR, FSMC_NBL0, DCMI_D2, EVENTOUT. |
| 142 | PE1 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_NBL1, DCMI_D3, EVENTOUT. |
| 143 | RFU | unconnected | Reserved for future use; this pin can be tied to VDD or VSS or left unconnected. |
| 144 | VDD | power_in | Digital supply pin; application supply and I/O supply range is 1.8 to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-144(20x20) |
| Category | Embedded Processors & Controllers |
| Pins | 144 |
CAD (KiCad official)
- Symbol:
STM32F205ZGT7 - Footprint:
Package_QFP:LQFP-144_20x20mm_P0.5mm - 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
- 3D model files:
stm32f205zgt7-etched.step/stm32f205zgt7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f205zgt7.step/stm32f205zgt7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (181 pp, sha256
774f5ff3acf8fdf5, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).