component
TC2018
Public Made by Adomby adom
Shenzhen Fuman Audio Amplifiers, ESOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTC2018
Shenzhen Fuman · Audio Amplifiers · ESOP-8-EP
TC2018 from Shenzhen Fuman, in a ESOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown control: high level shuts the amplifier down, low level enables operation, and the pin floats low through an internal pull-down; VIH is 1.4 V minimum and VIL is 0.35 V maximum at VDD=5 V. |
| 2 | BYP | passive | Reference voltage (bias) pin whose bypass capacitor Cbyp sets start-up speed and affects noise, PSRR and turn-on/turn-off pop; the datasheet gives start-up time of 150 ms with Cbyp=1 µF. |
| 3 | MODE | input | AB/D class select: high level selects Class D, low level or floating selects Class AB; VIH is 1.4 V minimum and VIL is 0.35 V maximum. |
| 4 | IN | input | Audio inverting input; the gain is set by the external input resistor Ri, with the gain kept below 2 V/V for best performance. |
| 5 | VON | output | Negative audio output (BTL bridge output), driving the load together with VOP. |
| 6 | VDD | power_in | Positive power supply, specified from 2.5 V to 5.5 V with an absolute maximum of 5.5 V, decoupled with at least 2.2 µF low-impedance ceramic capacitor placed close to the pin. |
| 7 | GND | power_in | Power supply ground. |
| 8 | VOP | output | Positive audio output (BTL bridge output), driving the load together with VON. |
| 9 | GND | power_in | Ground connection to the chip's bottom heat sink (exposed thermal pad), which the datasheet lists as pin 9 for heat dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Fuman |
| Package | ESOP-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 5.5 | V | 2 | ||
| Input voltage | Vi | -0.3 | V | upper limit printed as VDD+0.3 V | 2 | ||
| Operating junction temperature range | TJ | -40 | 125 | ℃ | 2 | ||
| Storage temperature range | TSTG | -65 | 150 | ℃ | 2 | ||
| ESD HBM | ESD-HBM | 5000 | V | Human body model (note 2) | 2 | ||
| ESD MM | ESD-MM | 400 | V | Machine model (note 2) | 2 | ||
| Soldering temperature | 260 | ℃ | 5 s | 2 | |||
| Supply voltage (D-class mode) | VIN | 2.5 | 5 | 5.5 | V | D类模式 | 3 |
| Supply voltage (AB-class mode) | VIN | 2.5 | 5 | 5.5 | V | AB类模式 | 4 |
| Shutdown current (D-class) | ISD | 1 | uA | D类模式; VDD=5V SD=0.3V | 3 | ||
| Quiescent current (D-class) | IDD | 4 | mA | D类模式; Vdd=5.0V, No Load | 3 | ||
| Quiescent current (D-class) | IDD | 2.8 | mA | D类模式; Vdd=3.0V | 3 | ||
| SD high-level voltage (D-class) | VIH | 1.4 | V | D类模式; VDD=5V | 3 | ||
| MODE high-level voltage (D-class) | VIH | 1.4 | V | D类模式 | 3 | ||
| SD low-level voltage (D-class) | VIL | 0.35 | V | D类模式 | 3 | ||
| MODE low-level voltage (D-class) | VIL | 0.35 | V | D类模式 | 3 | ||
| D-class output power | Pout | 3.2 | W | D类模式; Vdd=5.0V, RL=4Ω, THD+N=10%, f=1.0KHZ | 3 | ||
| D-class output power | Pout | 2.6 | W | D类模式; Vdd=5.0V, RL=4.0Ω, THD+N=1%, f=1.0KHZ | 3 | ||
| D-class output power | Pout | 5 | W | D类模式; Vdd=5.0V, RL=2.0Ω, THD+N=10%, f=1.0KHZ | 3 | ||
| D-class output power | Pout | 4.1 | W | D类模式; Vdd=5.0V, RL=2.0Ω, THD+N=1%, f=1.0KHZ | 3 | ||
| D-class THD+N | THD+N | 0.5 | % | D类模式; Vdd=5V, Po=1W, RL=4.0Ω | 3 | ||
| D-class THD+N | THD+N | 0.3 | % | D类模式; Vdd=3.6V, Po=1W, RL=4.0Ω | 3 | ||
| D-class THD+N | THD+N | 1 | % | D类模式; Vdd=5V, Po=2W, RL=2.0Ω | 3 | ||
| D-class THD+N | THD+N | 1.3 | % | D类模式; Vdd=3.6V, Po=2W, RL=2.0Ω | 3 | ||
| D-class efficiency | η | 75 | % | D类模式; Vdd=5V, Po=4W, RL=2.0Ω, f=1KHZ | 3 | ||
| D-class efficiency | η | 85 | % | D类模式; Vdd=5V, Po=2.8W, RL=4.0Ω, f=1KHZ | 3 | ||
| D-class residual noise | Vn | 115 | uV | D类模式; VDD=5.0V, input floating with CIN=0.1uF, A-weighting | 3 | ||
| D-class SNR | SNR | -79 | dB | D类模式; VDD=5V, Vo rms=1V, Gv=22dB, f=1KHZ | 3 | ||
| D-class dynamic range | Dyn | -88 | dB | D类模式; VDD=5V, THD=1%, f=1KHZ | 3 | ||
| D-class offset voltage | Vos | 10 | mV | D类模式; Vin=0V, VDD=5V | 3 | ||
| D-class PSRR | PSRR | 60 | dB | D类模式; f=1.0KHZ, Vdd=4.2V+/-250MV | 3 | ||
| D-class startup time | Tst | 150 | mS | D类模式; Cbyp=1uF | 4 | ||
| D-class gain | Gv | 23 | dB | D类模式; RI=22K | 4 | ||
| D-class operating frequency | Fosc | 737 | KHz | D类模式 | 4 | ||
| Overtemperature protection threshold (D-class) | OTP | 160 | ℃ | D类模式 | 4 | ||
| Overtemperature hysteresis (D-class) | OTH | 30 | ℃ | D类模式 | 4 | ||
| Shutdown current (AB-class) | ISD | 1 | uA | AB类模式; VDD=5V SD=0.3V | 4 | ||
| Quiescent current (AB-class) | IDD | 4 | mA | AB类模式; Vdd=5.0V, No Load | 4 | ||
| Quiescent current (AB-class) | IDD | 2.8 | mA | AB类模式; Vdd=3.0V | 4 | ||
| SD high-level voltage (AB-class) | VIH | 1.4 | V | AB类模式; VDD=5V | 4 | ||
| MODE high-level voltage (AB-class) | VIH | 1.4 | V | AB类模式 | 4 | ||
| SD low-level voltage (AB-class) | VIL | 0.35 | V | AB类模式 | 4 | ||
| MODE low-level voltage (AB-class) | VIL | 0.35 | V | AB类模式 | 4 | ||
| AB-class output power | Pout | 3.2 | W | AB类模式; Vdd=5.0V, RL=4Ω, THD+N=10%, f=1.0KHZ | 4 | ||
| AB-class output power | Pout | 2.5 | W | AB类模式; Vdd=5.0V, RL=4.0Ω, THD+N=1%, f=1.0KHZ | 4 | ||
| AB-class output power | Pout | 4.6 | W | AB类模式; Vdd=5.0V, RL=2.0Ω, THD+N=10%, f=1.0KHZ | 4 | ||
| AB-class output power | Pout | 3.8 | W | AB类模式; Vdd=5.0V, RL=2.0Ω, THD+N=1%, f=1.0KHZ | 4 | ||
| AB-class THD+N | THD+N | 0.35 | % | AB类模式; Vdd=5V, Po=1W, RL=4.0Ω | 4 | ||
| AB-class THD+N | THD+N | 0.36 | % | AB类模式; Vdd=3.6V, Po=1W, RL=4.0Ω | 4 | ||
| AB-class THD+N | THD+N | 0.68 | % | AB类模式; Vdd=5V, Po=2W, RL=2.0Ω | 4 | ||
| AB-class THD+N | THD+N | 1.5 | % | AB类模式; Vdd=3.6V, Po=2W, RL=2.0Ω | 4 | ||
| AB-class residual noise | Vn | 128 | uV | AB类模式; VDD=5.0V, input floating with CIN=0.1uF, A-weighting | 4 | ||
| AB-class SNR | SNR | -78 | dB | AB类模式; VDD=5V, Vo rms=1V, Gv=22dB, f=1KHZ | 4 | ||
| AB-class offset voltage | Vos | 10 | mV | AB类模式; Vin=0V, VDD=5V | 4 | ||
| AB-class dynamic range | Dyn | -88 | dB | AB类模式; VDD=5V, THD=1% | 4 | ||
| AB-class PSRR | PSRR | 62 | dB | AB类模式; f=1.0KHZ, Vdd=4.2V+/-250MV | 5 | ||
| AB-class startup time | Tst | 150 | mS | AB类模式; Cbyp=1uF | 5 | ||
| AB-class gain | Gv | 23 | dB | AB类模式; RI=22K | 5 | ||
| Overtemperature protection threshold (AB-class) | OTP | 160 | ℃ | AB类模式 | 5 | ||
| Overtemperature hysteresis (AB-class) | OTH | 30 | ℃ | AB类模式 | 5 |
CAD (KiCad official)
- Symbol:
TC2018 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: ESOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
tc2018-etched.step/tc2018-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc2018.step/tc2018.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen Fuman datasheet (7 pp, sha256
50d34aeca14c257e, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).