component
DY-ITR20005
Public Made by Adomby adom
TONYU Photointerrupters - Slot Type - Transistor Output, DIP-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownDY-ITR20005
TONYU · Photointerrupters - Slot Type - Transistor Output · DIP-4
DY-ITR20005 from TONYU, in a DIP-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | passive | Anode of the infrared LED emitter; forward voltage 1.2V typ/1.5V max at IF=20mA, continuous forward current limit 50mA, reverse voltage 5V max, series resistor needed. |
| 2 | Cathode | passive | Cathode of the infrared LED emitter (940nm peak wavelength). |
| 3 | Collector | passive | Phototransistor collector; collector-emitter voltage 30V max, collector current 20mA max, dark current 100nA max at VCE=20V. |
| 4 | Emitter | passive | Phototransistor emitter; emitter-collector voltage 5V max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TONYU |
| Package | DIP-4 |
| Category | Optoelectronics |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward voltage | VF | 1.2 | 1.5 | V | IF=20mA | 4 | |
| Reverse current | IR | 10 | μA | VR=5V | 4 | ||
| Dark current | ICEO | 100 | nA | VCE=20V, Ee=0mW/cm2 | 4 | ||
| C-E saturation voltage | VCE(sat) | 0.4 | V | IC=2mA, Ee=1mW/cm2 | 4 | ||
| Collector current (ON) | IC(ON) | 0.6 | mA | VCE=5V, IF=20mA | 4 | ||
| Collector current (OFF) | IC(OFF) | 20 | μA | 5 | |||
| Forward voltage tolerance | -0.1 | 0.1 | V | 5 | |||
| Radiant intensity tolerance | -10 | 10 | % | 5 | |||
| Wavelength tolerance | -1 | 1 | nm | 5 | |||
| Power dissipation | Pd | 75 | mW | at (or below) 25℃ free air temperature | 8 | ||
| Reverse voltage | VR | 5 | V | 8 | |||
| Forward current | IF | 50 | mA | 8 | |||
| Peak forward current | IFP | 1 | A | Pulse width ≤100μs, duty cycle=1%; tw=100 μsec, T=10 msec | 8 | ||
| Collector power dissipation | Pc | 75 | mW | 8 | |||
| Collector current | Ic | 20 | mA | 8 | |||
| Collector-emitter voltage | BVCEO | 30 | V | 8 | |||
| Emitter-collector voltage | BVECO | 5 | V | 8 | |||
| Operating temperature | Topr | -45 | 85 | ℃ | 8 | ||
| Storage temperature | Tstg | -45 | 85 | ℃ | 8 | ||
| Soldering temperature | Tsol | 260 | ℃ | Wave soldering, 3mm out of physical body, ≤3S | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | The kinked tooling scrape easily the pin of LED, where the LED bracket is rusting easily, especial expose it in moist air. To decrease the LED bracket rust, advise using plated tin LED bracket. | 11 |
CAD (KiCad official)
- Symbol:
DY-ITR20005 - Footprint:
Package_DIP:DIP-4_W7.62mm - 3D model: DIP-4 (KiCad packages3D, STEP)
- 3D model files:
dy-itr20005-etched.step/dy-itr20005-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dy-itr20005.step/dy-itr20005.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TONYU datasheet (11 pp, sha256
be21ffc01375bc4a, retrieved 2026-10-16, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).