component
ISO7763DWR
Public Made by Adomby adom
Texas Instruments Digital Isolators, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownISO7763DWR
Texas Instruments · Digital Isolators · SOIC-16-300mil
ISO7763DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for side 1 (input side), with a recommended range of 2.25 V to 5.5 V and an absolute maximum of 6 V relative to GND1. |
| 2 | INA | input | Logic input for channel A on side 1, which must stay between -0.5 V and VCC1 + 0.5 V and never exceed 6 V. |
| 3 | INB | input | Logic input for channel B on side 1, which must stay between -0.5 V and VCC1 + 0.5 V and never exceed 6 V. |
| 4 | INC | input | Logic input for channel C on side 1, which must stay between -0.5 V and VCC1 + 0.5 V and never exceed 6 V. |
| 5 | OUTD | output | Logic output for channel D on side 1, with output current limited to 15 mA (absolute maximum) and voltage limited to -0.5 V to VCC1 + 0.5 V, never above 6 V. |
| 6 | OUTE | output | Logic output for channel E on side 1, with output current limited to 15 mA (absolute maximum) and voltage limited to -0.5 V to VCC1 + 0.5 V, never above 6 V. |
| 7 | OUTF | output | Logic output for channel F on side 1, with output current limited to 15 mA (absolute maximum) and voltage limited to -0.5 V to VCC1 + 0.5 V, never above 6 V. |
| 8 | GND1 | power_in | Ground connection for VCC1; all side 1 voltages are referenced to this terminal. |
| 9 | GND2 | power_in | Ground connection for VCC2; all side 2 voltages are referenced to this terminal. |
| 10 | INF | input | Logic input for channel F on side 2, which must stay between -0.5 V and VCC2 + 0.5 V and never exceed 6 V. |
| 11 | INE | input | Logic input for channel E on side 2, which must stay between -0.5 V and VCC2 + 0.5 V and never exceed 6 V. |
| 12 | IND | input | Logic input for channel D on side 2, which must stay between -0.5 V and VCC2 + 0.5 V and never exceed 6 V. |
| 13 | OUTC | output | Logic output for channel C on side 2, with output current limited to 15 mA (absolute maximum) and voltage limited to -0.5 V to VCC2 + 0.5 V, never above 6 V. |
| 14 | OUTB | output | Logic output for channel B on side 2, with output current limited to 15 mA (absolute maximum) and voltage limited to -0.5 V to VCC2 + 0.5 V, never above 6 V. |
| 15 | OUTA | output | Logic output for channel A on side 2, with output current limited to 15 mA (absolute maximum) and voltage limited to -0.5 V to VCC2 + 0.5 V, never above 6 V. |
| 16 | VCC2 | power_in | Power supply for side 2 (output side), with a recommended range of 2.25 V to 5.5 V and an absolute maximum of 6 V relative to GND2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Signal Isolation Devices |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
ISO7763DWR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
iso7763dwr-etched.step/iso7763dwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7763dwr.step/iso7763dwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (53 pp, sha256
e874ba7120e9c3d8, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).