Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX65HVD08-S

ZHHXDZ · RS-485 / RS-422 ICs · SOP-8

HX65HVD08-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver data output: RO is high when V(A)-V(B) is at least -50 mV and low when V(A)-V(B) is at most -200 mV, and it is enabled only while RE is low.
2 RE input Receiver output enable, active low: when RE is high the receiver is turned off, and when RE is high with DE low the whole chip enters shutdown.
3 DE input Driver output enable: when DE is high the driver outputs A and B are enabled, and when DE is low the driver turns off and the outputs enter a high-impedance state.
4 DI input Driver data input: with the driver enabled, DI high drives A high and B low, and DI low drives A low and B high.
5 GND power_in Ground reference pin for the device.
6 A bidirectional Non-inverting driver output and non-inverting receiver input of the RS-485/RS-422 bus, with ±15 kV human-body-model ESD protection stated for the driver and receiver pins.
7 B bidirectional Inverting driver output and inverting receiver input of the RS-485/RS-422 bus, with ±15 kV human-body-model ESD protection stated for the driver and receiver pins.
8 VCC power_in Supply pin for the 3.3V/5V supply range; the datasheet's DC characteristics are specified at VCC = 3.3V ±5%, and the absolute maximum VCC rating is +6.0 V.

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 6 V 2
Control input voltage DE,RE -0.3 6 V 2
Driver input voltage DI -0.3 6 V 2
Driver output / receiver input voltage A,B -8 13 V 2
Storage temperature TSTG -65 150 ℃ 2
Operating temperature TOP -40 125 ℃ 2
Power dissipation 471 mW SOP-8, above 70 ℃ 2
Lead temperature (soldering) 300 ℃ 10 seconds 2
Input high voltage VIH1 2 V DE, DI, RE 2
Input low voltage VIL1 0.8 V DE, DI, RE 2
Receiver output low voltage VOL 0.4 V IO=4mA, VID=-1V 2
Receiver output short-circuit current IOSR -7 7 mA 0V≤VRO≤VCC 2
Receiver input impedance RIN 96 kΩ -7V≤VCM≤+12V 2
Input current (DE, DI, RE) IIN1 -2 2 uA 2
Input current (A and B) IIN4 125 uA DE=GND, VCC=GND or 5.25V, VIN=12V 2
Shutdown supply current 10 uA DE=GND, RE=Vcc 2

CAD (KiCad official)

  • Symbol: HX65HVD08-S
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx65hvd08-s-etched.step / hx65hvd08-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx65hvd08-s.step / hx65hvd08-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (5 pp, sha256 51e09edb3fc819f6, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF