Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP79511T-I

Microchip Tech · Real-time Clocks (RTC) · MSOP-10

MCP79511T-I from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 X1 passive Quartz crystal input for a 32.768 kHz crystal (load 6-9 pF), also the external clock input when the external oscillator is used.
2 X2 passive Quartz crystal output for a 32.768 kHz crystal; left floating when X1 is driven by an external clock source.
3 VBAT power_in Battery backup supply input that maintains the RTCC and SRAM when VCC is unavailable, with a backup range of 1.3V to 3.6V; connect to VSS if backup is not used.
4 CS input Chip select input, active low; a high level deselects the device and puts SO in the high-impedance state.
5 VSS power_in Ground reference for the device.
6 SI input Serial data input that receives instructions, addresses and data, latched on the rising edge of SCK.
7 SO output Serial data output shifted out after the falling edge of SCK during a read cycle; high impedance when the device is deselected.
8 SCK input Serial clock input; SI is latched on its rising edge and SO is updated after its falling edge.
9 MFP output Multifunction pin shared with the clock divider and alarms; it requires an external pull-up to VCC or VBAT, remains low until the interrupt flag is cleared, and has a maximum sink current of 10 mA.
10 VCC power_in Primary power supply with an operating voltage range of 1.8V to 3.6V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category RTC/Clock Chip
Pins 10

CAD (KiCad official)

  • Symbol: MCP79511T-I
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: mcp79511t-i-etched.step / mcp79511t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp79511t-i.step / mcp79511t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (58 pp, sha256 1caaeadd97693b59, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF