Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

O9252050MADA4SI

Yangxing Tech · Pre-programmed Oscillators · SMD2520-4P

O9252050MADA4SI from Yangxing Tech, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input Output enable, standby or no-connect pin: with OE, H gives the specified frequency output and L sets the output low and stops it; with ST, L sets the output low and puts the device in sleep mode with supply current reduced to 400uA; with NC, Pin 1 = VDD or open gives the specified frequency output and the pin has no function.
2 GND power_in Electrical ground.
3 OUT output Oscillator output (CMOS, 15pF load, VOH = 90% VDD min, VOL = 10% VDD max).
4 VDD power_in Power supply voltage of 1.8 V (1.62V1.98V), 2.5 V (2.25V2.75V) or 3.3 V (2.97V~3.63V) depending on the option.

Key specifications

Parameter Value
Manufacturer Yangxing Tech
Package SMD2520-4P
Category Crystal Oscillator/Oscillator/Resonator
Pins 4

CAD (KiCad official)

  • Symbol: O9252050MADA4SI
  • Footprint: Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm
  • 3D model: SMD2520-4P (KiCad packages3D, STEP)
  • 3D model files: o9252050mada4si-etched.step / o9252050mada4si-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); o9252050mada4si.step / o9252050mada4si.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Yangxing Tech datasheet (10 pp, sha256 062a45cef086794d, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF