Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LTC1799IS5#TRMPBF

Analog Devices · Timers / Clock Oscillators · TSOT-23-5

LTC1799IS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V+ power_in Voltage supply pin for 2.7V to 5.5V operation, which must be kept free from noise and ripple and bypassed directly to a ground plane with a 0.1µF capacitor.
2 GND power_in Ground pin that should be tied to a ground plane for best performance.
3 SET input Frequency-setting resistor input where the resistor between SET and V+ sets the oscillator frequency; the SET voltage is held about 1.13V below V+, so a precision metal film resistor of 10k to 200k should be used and the capacitance on this pin limited to less than 10pF.
4 DIV input Three-state divider-setting input that selects ÷1 when tied to GND, ÷10 when floated, and ÷100 when tied to V+, and a floating pin should preferably be bypassed with 1nF to ground.
5 OUT output Oscillator output that can drive 5kΩ and/or 10pF loads, with current into or out of the pin limited to 50mA to avoid latchup.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-5
Category Clock and Timing
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Accuracy (5kHz ≤ f ≤ 20MHz, LTC1799I/H) ∆f -2.5 2.5 % V+ = 5V, 5kHz ≤ f ≤ 20MHz, LTC1799I/H 3
Frequency Accuracy (1kHz ≤ f ≤ 5kHz) ∆f -1.5 1.5 % V+ = 5V, 1kHz ≤ f ≤ 5kHz 3
Frequency Accuracy (20MHz ≤ f ≤ 33MHz) ∆f -2 2 % V+ = 5V, 20MHz ≤ f ≤ 33MHz 3
Frequency Accuracy (5kHz ≤ f ≤ 10MHz, LTC1799I/H) ∆f -2.5 2.5 % V+ = 3V, 5kHz ≤ f ≤ 10MHz, LTC1799I/H 3
Frequency Accuracy (1kHz ≤ f ≤ 5kHz, 3V) ∆f -1.5 1.5 % V+ = 3V, 1kHz ≤ f ≤ 5kHz 3
Frequency Accuracy (10MHz ≤ f ≤ 20MHz) ∆f -2 2 % V+ = 3V, 10MHz ≤ f ≤ 20MHz 3
Frequency-Setting Resistor Range (5V) RSET 5 200 kΩ /∆f/ < 1.5%, V+ = 5V 3
Frequency-Setting Resistor Range (3V) RSET 10 200 kΩ /∆f/ < 1.5%, V+ = 3V 3
Maximum Frequency (5V) fMAX 33 MHz /∆f/ < 2.5%, Pin 4 = 0V, V+ = 5V 3
Maximum Frequency (3V) fMAX 20 MHz /∆f/ < 2.5%, Pin 4 = 0V, V+ = 3V 3
Minimum Frequency fMIN 1 kHz /∆f/ < 2.5%, Pin 4 = V+ 3
Freq Drift Over Temp ∆f/∆T -0.004 0.004 %/°C RSET = 31.6k 3
Freq Drift Over Supply ∆f/∆V 0.05 0.1 %/V V+ = 3V to 5V, RSET = 31.6k 3
Duty Cycle (DIV by 100 or 10) Duty Cycle 49 51 % Pin 4 = V+ or Open (DIV either by 100 or 10) 3
Duty Cycle (DIV by 1) Duty Cycle 45 55 % Pin 4 = 0V (DIV by 1), RSET = 5k to 200k 3
Operating Supply Range V+ 2.7 5.5 V 3
Power Supply Current (RSET=200k) IS 0.7 1.1 mA RSET = 200k, Pin 4 = V+, RL = ∞, V+ = 5V 3
Power Supply Current (RSET=10k, 5V) IS 2.4 mA RSET = 10k, Pin 4 = 0V, RL = ∞, V+ = 5V 3
Power Supply Current (RSET=10k, 3V) IS 2 mA RSET = 10k, Pin 4 = 0V, RL = ∞, V+ = 3V 3
Low Level DIV Input Voltage VIL 0.5 V 3
DIV Input Current (Pin 4 = V+) IDIV -8 -5 µA Pin 4 = V+, V+ = 5V 3
DIV Input Current (Pin 4 = 0V) IDIV 5 8 µA Pin 4 = 0V, V+ = 5V 3
High Level Output Voltage (5V, 1mA) VOH 4.8 4.95 V V+ = 5V, LTC1799C/I, IOH = -1mA 4
High Level Output Voltage (5V, 4mA) VOH 4.5 4.8 V V+ = 5V, LTC1799C/I, IOH = -4mA 4
High Level Output Voltage (3V, 1mA) VOH 2.7 2.9 V V+ = 3V, LTC1799C/I, IOH = -1mA 4
High Level Output Voltage (3V, 4mA) VOH 2.2 2.6 V V+ = 3V, LTC1799C/I, IOH = -4mA 4
Low Level Output Voltage (5V, 1mA) VOL 0.05 0.15 V V+ = 5V, LTC1799C/I, IOL = 1mA 4
Low Level Output Voltage (5V, 4mA) VOL 0.2 0.4 V V+ = 5V, LTC1799C/I, IOL = 4mA 4
Low Level Output Voltage (3V, 1mA) VOL 0.1 0.3 V V+ = 3V, LTC1799C/I, IOL = 1mA 4
Low Level Output Voltage (3V, 4mA) VOL 0.4 0.7 V V+ = 3V, LTC1799C/I, IOL = 4mA 4
Operating Temperature Range (LTC1799I) TA -40 85 °C LTC1799I 2
Supply Voltage (V+) to GND V+ -0.3 6 V to GND 2
DIV to GND DIV -0.3 V to GND; upper limit printed as (V+ + 0.3V) 2
SET to GND SET -0.3 V to GND; upper limit printed as (V+ + 0.3V) 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature (Soldering, 10 sec) TLEAD 300 °C 10 sec soldering 2
Maximum Junction Temperature TJMAX 150 °C 2
Thermal Resistance, Junction to Ambient θJA 256 °C/W 2

CAD (KiCad official)

  • Symbol: LTC1799IS5#TRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: ltc1799is5-trmpbf-etched.step / ltc1799is5-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc1799is5-trmpbf.step / ltc1799is5-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (14 pp, sha256 ce4553360ca47502, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF