3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM95M01-DFDW6TP
STMicroelectronics · EEPROM · TSSOP-8 (ST TSSOP8)
M95M01-DFDW6TP from STMicroelectronics, in a TSSOP-8 (ST TSSOP8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Active-low Chip Select: high deselects the device and puts Q in high impedance (Standby mode), low selects it (Active mode); a falling edge is required after power-up before any instruction. |
| 2 | Q | output | Serial Data Output: data is shifted out on the falling edge of Serial Clock C, and the pin is high impedance when deselected or in the Hold condition. |
| 3 | W | input | Write Protect: freezes the size of the memory area protected by the BP1/BP0 bits and must be driven high or low and be stable during all Write instructions. |
| 4 | VSS | power_in | Ground, the reference for all signals including the VCC supply voltage. |
| 5 | D | input | Serial Data Input: receives instructions, addresses and data to be written, latched on the rising edge of Serial Clock C. |
| 6 | C | input | Serial Clock: provides the timing of the serial interface, with inputs latched on the rising edge and Q changing from the falling edge; up to 16 MHz. |
| 7 | HOLD | input | Hold: pauses serial communication without deselecting the device; during Hold, Q is high impedance and D and C are Don't Care. |
| 8 | VCC | power_in | Supply voltage, 1.7 V to 5.5 V for M95M01-DF, which must be stable and valid during all operations and decoupled with 10 nF to 100 nF close to the pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 (ST TSSOP8) |
| Category | Memory |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | TLEAD Lead temperature during soldering See note (1) 1. Compliant with JEDEC standard J-STD-020D (for small-body, Sn-Pb or Pb free assembly), the ST | 32 |
CAD (Adom-generated)
- Symbol:
M95M01-DFDW6TP - Footprint:
Adom_Gen:STMicroelectronics_TSSOP8 - 3D model: generated to fit the land (STEP)
- 3D model files:
m95m01-dfdw6tp-etched.step/m95m01-dfdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95m01-dfdw6tp.step/m95m01-dfdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet, copy hosted by JLCPCB (53 pp, sha256
323ad6b5a1d5fe41, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Its own sheet (sha 323ad6b5a1d5) prints no TSSOP8 land; ST's printed TSSOP8 land, M24512 DS6520 Rev 31 p.32 Figure 18 (TSSOP8 - Recommended footprint): 1.0 x 0.35 mm pads, pitch 0.65, 7.0 outer, rows 6.0 c-c. Same package: this part's own outline on record (M95M01-DFDW6TP-dims.extracted.json, TSSOP8 p.40): body (2.9, 3.1) x (4.3, 4.5), lead span (6.2, 6.6), pitch 0.65 = ST TSSOP8 (D 2.9/3.0/3.1, E1 4.3/4.4/4.5, E 6.2/6.4/6.6, e 0.65). Shared land Adom_Gen:STMicroelectronics_TSSOP8. Task master ruling 2026-11-21 (ST TSSOP8).