3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHT1621DM
HGSEMI · LCD Drivers · SSOP-24-150mil
HT1621DM from HGSEMI, in a SSOP-24-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SEG17 | output | LCD segment output 17. |
| 2 | SEG16 | output | LCD segment output 16. |
| 3 | SEG15 | output | LCD segment output 15. |
| 4 | SEG14 | output | LCD segment output 14. |
| 5 | SEG13 | output | LCD segment output 13. |
| 6 | SEG12 | output | LCD segment output 12. |
| 7 | SEG11 | output | LCD segment output 11. |
| 8 | SEG10 | output | LCD segment output 10. |
| 9 | SEG9 | output | LCD segment output 9. |
| 10 | ~{CS} | input | Chip select input, active low, with pull-up (HGSEMI p.2 prints CS with an overbar). High: data and commands cannot be read or written and the serial interface resets; low: the controller and HT1621 exchange data and commands. |
| 11 | ~{WR} | input | WRITE clock input with pull-up (HGSEMI p.2 prints WR with an overbar); DATA is latched into the HT1621 on the rising edge of WR. |
| 12 | DATA | bidirectional | Serial data input/output with pull-up resistor. |
| 13 | VSS | power_in | Ground. |
| 14 | VLCD | power_in | LCD voltage input, used to adjust the LCD drive voltage. |
| 15 | VDD | power_in | Power supply, operating range 2.4V to 5.2V. |
| 16 | COM0 | output | LCD common output 0. |
| 17 | COM1 | output | LCD common output 1. |
| 18 | COM2 | output | LCD common output 2. |
| 19 | COM3 | output | LCD common output 3. |
| 20 | SEG22 | output | LCD segment output 22. |
| 21 | SEG21 | output | LCD segment output 21. |
| 22 | SEG20 | output | LCD segment output 20. |
| 23 | SEG19 | output | LCD segment output 19. |
| 24 | SEG18 | output | LCD segment output 18. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SSOP-24-150mil |
| Category | LED Drivers |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 5.5 | V | 13 | ||
| Storage temperature | TSTG | -50 | 125 | ℃ | 13 | ||
| Operating temperature | TOTG | -25 | 75 | ℃ | 13 | ||
| Pin soldering temperature | TLEAD | 260 | ℃ | Pin soldering, 10 s | 13 | ||
| Operating voltage | VDD | 2.4 | 5.2 | V | 13 | ||
| Working current (on-chip RC oscillator, LCD on) | IDD1 | 150 | 300 | µA | VDD=3V, no load, LCD on, on-chip RC oscillator | 13 | |
| Working current (on-chip RC oscillator, LCD on) | IDD1 | 300 | 600 | µA | VDD=5V, no load, LCD on, on-chip RC oscillator | 13 | |
| Working current (crystal oscillator, LCD on) | IDD2 | 60 | 120 | µA | VDD=3V, no load, LCD on, crystal oscillator | 13 | |
| Working current (crystal oscillator, LCD on) | IDD2 | 120 | 240 | µA | VDD=5V, no load, LCD on, crystal oscillator | 13 | |
| Working current (external clock, LCD off) | IDD3 | 100 | 200 | µA | VDD=3V, no load, LCD off, external clock | 13 | |
| Working current (external clock, LCD off) | IDD3 | 200 | 400 | µA | VDD=5V, no load, LCD off, external clock | 13 | |
| Standby current | ISTB | 0.1 | 5 | µA | VDD=3V, no load | 13 | |
| Standby current | ISTB | 0.3 | 10 | µA | VDD=5V, power-down mode | 13 | |
| Input low voltage (DATA, WR, CS, RD) | VIL | 0 | 0.6 | V | VDD=3V; pins DATA, WR, CS, RD | 13 | |
| Input low voltage (DATA, WR, CS, RD) | VIL | 0 | 1 | V | VDD=5V; pins DATA, WR, CS, RD | 13 | |
| Input high voltage (DATA, WR, CS, RD) | VIH | 2.4 | 3 | V | VDD=3V; pins DATA, WR, CS, RD | 13 | |
| Input high voltage (DATA, WR, CS, RD) | VIH | 4 | 5 | V | VDD=5V; pins DATA, WR, CS, RD | 13 | |
| Low-level output sink current (DATA, BZ, BZ-bar, IRQ-bar) | IOL1 | 0.5 | 1.2 | mA | VDD=3V, VOL=0.3V | 13 | |
| Low-level output sink current (DATA, BZ, BZ-bar, IRQ-bar) | IOL1 | 1.3 | 2.6 | mA | VDD=5V, VOL=0.5V | 13 | |
| High-level output source current (DATA, BZ, BZ-bar) | IOH1 | -0.4 | -0.8 | mA | VDD=3V, VOH=2.7V | 13 | |
| High-level output source current (DATA, BZ, BZ-bar) | IOH1 | -0.9 | -1.8 | mA | VDD=5V, VOH=4.5V | 13 | |
| LCD common pin sink current | IOL2 | 80 | 150 | µA | VDD=3V, VOL=0.3V | 13 | |
| LCD common pin sink current | IOL2 | 150 | 250 | µA | VDD=5V, VOL=0.5V | 13 | |
| LCD common pin source current | IOH2 | -80 | -120 | µA | VDD=3V, VOH=2.7V | 13 | |
| LCD common pin source current | IOH2 | -120 | -200 | µA | VDD=5V, VOH=4.5V | 13 | |
| LCD segment pin sink current | IOL3 | 60 | 120 | µA | VDD=3V, VOL=0.3V | 13 | |
| LCD segment pin sink current | IOL3 | 120 | 200 | µA | VDD=5V, VOL=0.5V | 13 | |
| LCD segment pin source current | IOH3 | -40 | -70 | µA | VDD=3V, VOH=2.7V | 13 | |
| LCD segment pin source current | IOH3 | -70 | -100 | µA | VDD=5V, VOH=4.5V | 13 | |
| Pull-up resistor (DATA, WR, CS, RD) | RPH | 40 | 80 | 150 | kΩ | VDD=3V; pins DATA, WR, CS, RD | 13 |
| Pull-up resistor (DATA, WR, CS, RD) | RPH | 30 | 60 | 100 | kΩ | VDD=5V; pins DATA, WR, CS, RD | 13 |
| Serial data clock (WR pin) | FCLK1 | 150 | kHz | VDD=3V, 50% duty cycle | 14 | ||
| Serial data clock (WR pin) | FCLK1 | 300 | kHz | VDD=5V, 50% duty cycle | 14 | ||
| Serial data clock (RD pin) | FCLK2 | 75 | kHz | VDD=3V, 50% duty cycle | 14 | ||
| Serial data clock (RD pin) | FCLK2 | 150 | kHz | VDD=5V, 50% duty cycle | 14 | ||
| WR/RD input pulse width | tCLK | 3.34 | µs | VDD=3V, write mode | 14 | ||
| WR/RD input pulse width | tCLK | 6.67 | µs | VDD=3V, read mode | 14 | ||
| WR/RD input pulse width | tCLK | 1.67 | µs | VDD=5V, write mode | 14 |
CAD (KiCad official)
- Symbol:
HT1621DM - Footprint:
Package_SO:SSOP-24_3.9x8.7mm_P0.635mm - 3D model: SSOP-24-150mil, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.4 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ht1621dm-etched.step/ht1621dm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht1621dm.step/ht1621dm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (19 pp, sha256
ace3f17b9fb899e1, retrieved 2026-11-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).