component
SRC4392IPFBR
Public Made by Adomby adom
Texas Instruments Audio Interface ICs, TQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSRC4392IPFBR
Texas Instruments · Audio Interface ICs · TQFP-48(7x7)
SRC4392IPFBR from Texas Instruments, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RX1+ | input | Noninverting input of line receiver 1; the RX1+/RX1- pair has a differential input sensitivity of 150 mV min and 200 mV typ. |
| 2 | RX1- | input | Inverting input of line receiver 1; it forms a differential pair with RX1+ with the 150 mV min / 200 mV typ sensitivity given for the line receiver inputs. |
| 3 | RX2+ | input | Noninverting input of line receiver 2; the RX2+/RX2- pair has a differential input sensitivity of 150 mV min and 200 mV typ. |
| 4 | RX2- | input | Inverting input of line receiver 2; it forms a differential pair with RX2+ with the 150 mV min / 200 mV typ sensitivity given for the line receiver inputs. |
| 5 | RX3+ | input | Noninverting input of line receiver 3; the RX3+/RX3- pair has a differential input sensitivity of 150 mV min and 200 mV typ. |
| 6 | RX3- | input | Inverting input of line receiver 3; it forms a differential pair with RX3+ with the 150 mV min / 200 mV typ sensitivity given for the line receiver inputs. |
| 7 | RX4+ | input | Noninverting input of line receiver 4; the RX4+/RX4- pair has a differential input sensitivity of 150 mV min and 200 mV typ. |
| 8 | RX4- | input | Inverting input of line receiver 4; it forms a differential pair with RX4+ with the 150 mV min / 200 mV typ sensitivity given for the line receiver inputs. |
| 9 | VCC | power_in | DIR comparator and PLL power supply, +3.3V nominal (recommended range +3.0 V to +3.6 V). |
| 10 | AGND | power_in | DIR comparator and PLL power-supply ground; the substrate ground BGND (pin 44) should be connected to this pin by a PCB trace. |
| 11 | LOCK | output | DIR PLL lock flag, active low. |
| 12 | RXCKO | tri_state | DIR recovered master clock output, 3-state output. |
| 13 | RXCKI | input | DIR reference clock input. |
| 14 | MUTE | input | SRC output mute input, active high. |
| 15 | RDY | output | SRC ready flag output, active low. |
| 16 | DGND1 | power_in | Digital core ground. |
| 17 | VDD18 | power_in | Digital core supply, +1.8V nominal (recommended range +1.65 V to +1.95 V). |
| 18 | CPM | input | Control port mode input: 0 selects SPI mode and 1 selects I2C mode; it must be tied to ground or pulled up to VIO respectively. |
| 19 | CS/A0 | input | Chip select, active low, for SPI mode; programmable slave address bit A0 for I2C mode. |
| 20 | CCLK/SCL | input | Serial data clock for SPI mode (CCLK) or I2C bus clock (SCL); in I2C mode it requires an external pull-up to VIO. |
| 21 | CDIN/A1 | input | SPI serial data input for SPI mode; programmable slave address bit A1 for I2C mode. |
| 22 | CDOUT/SDA | bidirectional | SPI serial data output, 3-state when CS is high (SPI mode); serial data I/O for I2C mode, requiring an external pull-up to VIO. |
| 23 | INT | output | Interrupt flag output, open-drain and active low; requires a pull-up resistor to VIO (10 kΩ suggested). |
| 24 | RST | input | Reset input, active low, for device initialization. |
| 25 | MCLK | input | Master clock input; frequency range 1 MHz to 27.7 MHz with 45%-55% duty cycle. |
| 26 | GPO1 | output | General-purpose output 1, programmable via control registers 0x1B-0x1E. |
| 27 | GPO2 | output | General-purpose output 2, programmable via control registers 0x1B-0x1E. |
| 28 | GPO3 | output | General-purpose output 3, programmable via control registers 0x1B-0x1E. |
| 29 | GPO4 | output | General-purpose output 4, programmable via control registers 0x1B-0x1E. |
| 30 | DGND2 | power_in | DIR line receiver bias and DIT line driver digital ground. |
| 31 | TX- | output | DIT line driver inverting output; differential output across TX+ and TX- is 5.4 VPP typical into RL = 110 Ω. |
| 32 | TX+ | output | DIT line driver noninverting output; differential output across TX+ and TX- is 5.4 VPP typical into RL = 110 Ω. |
| 33 | VDD33 | power_in | DIR line receiver bias and DIT line driver supply, +3.3V nominal (recommended range +3.0 V to +3.6 V). |
| 34 | AESOUT | output | DIT buffered AES3-encoded CMOS logic-level data output. |
| 35 | BLS | bidirectional | DIT block start clock; configurable as input (default) or output via the BLSM bit. |
| 36 | SYNC | output | DIT internal sync clock output. |
| 37 | BCKA | bidirectional | Audio serial Port A bit clock. |
| 38 | LRCKA | bidirectional | Audio serial Port A left/right clock. |
| 39 | SDINA | input | Audio serial Port A data input. |
| 40 | SDOUTA | output | Audio serial Port A data output. |
| 41 | NC | unconnected | No internal signal connection; internally bonded to the ESD pad. |
| 42 | VIO | power_in | Logic I/O supply, +1.65V to +3.6V. |
| 43 | DGND3 | power_in | Logic I/O ground. |
| 44 | BGND | power_in | Substrate ground; connect to AGND (pin 10) by a PCB trace. |
| 45 | SDOUTB | output | Audio serial Port B data output. |
| 46 | SDINB | input | Audio serial Port B data input. |
| 47 | LRCKB | bidirectional | Audio serial Port B left/right clock. |
| 48 | BCKB | bidirectional | Audio serial Port B bit clock. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TQFP-48(7x7) |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supplies: VDD18 | VDD18 | -0.3 | 2 | V | 3 | ||
| Power Supplies: VDD33 | VDD33 | -0.3 | 4 | V | 3 | ||
| Power Supplies: VIO | VIO | -0.3 | 4 | V | 3 | ||
| Power Supplies: VCC | VCC | -0.3 | 4 | V | 3 | ||
| Input Current (all pins except power and ground) | -10 | 10 | mA | 3 | |||
| Ambient Operating Temperature | -40 | 85 | °C | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Recommended Supply Voltage Range: VDD18 | VDD18 | 1.65 | 1.8 | 1.95 | V | 8 | |
| Recommended Supply Voltage Range: VDD33 | VDD33 | 3 | 3.3 | 3.6 | V | 8 | |
| Recommended Supply Voltage Range: VIO | VIO | 1.65 | 3.3 | 3.6 | V | 8 | |
| Recommended Supply Voltage Range: VCC | VCC | 3 | 3.3 | 3.6 | V | 8 | |
| Low-Level Input Voltage | VIL | 0 | V | 4 | |||
| High-Level Input Current | IIH | 0.5 | 10 | μA | 4 | ||
| Low-Level Input Current | VIL | 0.5 | 10 | μA | 4 | ||
| Low-Level Output Voltage | VOL | 0 | V | IO = +4mA | 4 | ||
| Differential Input Sensitivity | VTH | 150 | 200 | mV | Voltage across a given differential input pair | 4 | |
| Master Clock Input (MCLK) Frequency | fMCLK | 1 | 27.7 | MHz | 4 | ||
| Master Clock Input (MCLK) Duty Cycle | fMCLKD | 45 | 55 | % | 4 | ||
| Input or Output Sampling Rate | fSIN or fSOUT | 4 | 216 | kHz | 4 | ||
| Digital Interpolation Filter Passband Ripple | -0.007 | 0.007 | dB | 5 | |||
| Digital Decimation Filter Passband Ripple | -0.008 | 0.008 | dB | 5 | |||
| PLL Lock Range | 20 | 216 | kHz | 6 | |||
| Reference Clock Input (RXCKI) Frequency | fRXCKI | 3.5 | 27.7 | MHz | 6 | ||
| Reference Clock Input (RXCKI) Duty Cycle | fRXCKID | 45 | 55 | % | 6 | ||
| Recovered Clock Output (RXCKO) Frequency | fRXCKO | 3.5 | 27.7 | MHz | 6 | ||
| Recovered Clock Output (RXCKO) Duty Cycle | fRXCKOD | 45 | 55 | % | 6 | ||
| LRCK Clock Frequency | fLRCK | 0 | 216 | kHz | 6 | ||
| BCK Clock Frequency | fBCK | 0 | 13.824 | MHz | 6 | ||
| Serial Clock (CCLK) Frequency | fCCLK | 0 | 40 | MHz | 6 | ||
| SCL Clock Frequency (Standard Mode) | fSCL | 0 | 100 | kHz | I2C Standard Mode | 7 | |
| Data Hold Time (Standard Mode) | tHDDAT | 0 | 3.45 | μs | I2C Standard Mode | 7 | |
| SCL Clock Frequency (Fast Mode) | fSCL | 0 | 400 | kHz | I2C Fast Mode | 7 | |
| Data Hold Time (Fast Mode) | tHDDAT | 0 | 0.9 | μs | I2C Fast Mode | 7 | |
| Rise Time for Both SDA and SCL (Fast Mode) | tR | 300 | ns | 7 | |||
| Fall Time for Both SDA and SCL (Fast Mode) | tF | 300 | ns | 7 | |||
| Spike Pulse Width Suppressed by Input Filter | tSP | 0 | 50 | ns | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | nickel | SD NI A (pin 39) or SDINB (pin 4 )6 LRCKA (pin 3 ) or8 LRCKB ( i 47) p n | 25 |
CAD (KiCad official)
- Symbol:
SRC4392IPFBR - Footprint:
Package_QFP:TQFP-48_7x7mm_P0.5mm - 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
src4392ipfbr-etched.step/src4392ipfbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);src4392ipfbr.step/src4392ipfbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (95 pp, sha256
873894c2c2b1048a, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).