Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMR54410DBVR

Texas Instruments · DC-DC Converters · SOT-23-6

LMR54410DBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CB output Bootstrap capacitor connection for high-side FET driver; connect 100nF high-quality ceramic capacitor from this pin to SW pin.
2 GND power_in Power ground pin connected to low-side FET source; connect to system ground and ground side of CIN and COUT with shortest path to CIN.
3 FB input Feedback input to converter for output voltage regulation; connect resistor divider from VOUT to set output voltage and never short this terminal to ground during operation.
4 EN input Precision enable input controlling converter ON/OFF (high = on, low = off); do not float, can be tied to VIN, voltage must not exceed VIN + 0.3V, enables adjustable UVLO by external resistor divider.
5 VIN power_in Supply input pin for internal bias LDO and high-side FET with input range 4V to 36V (withstands 50V short transients); connect to input supply and input bypass capacitors directly to this pin.
6 SW output Switching output of converter internally connected to source of high-side FET and drain of low-side FET; connect to external power inductor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

CAD (KiCad official)

  • Symbol: LMR54410DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lmr54410dbvr-etched.step / lmr54410dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr54410dbvr.step / lmr54410dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 f0dc0ace8430cad9, retrieved 2026-09-22, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF